Package: bluetooth
Priority: optional
Section: admin
Installed-Size: 76
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez
Suggests: bluez-cups, bluez-obexd, bluez-meshd
Filename: pool/target/b/bluez/bluetooth_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 50204
MD5sum: 899d4622cff71a98b2b5a47ec89a4c71
SHA1: 15a3ca01987070790237dcc1aff3f47ef2f1e054
SHA256: 7f3658a8c3c11231b58c0c855dd5aa10b1602681885f86a4730fe0e2d15410e8
SHA512: 46cb2ec035b62cdc7996f547b67c89e49d828f57c7e3a55062256b83e257fb2740872dd31b67c4be4fb64b70998de6bed43f30b205930d401acdbc6550f6d964
Description: Bluetooth support (metapackage)
 This package provides all of the different plugins supported
 by the Bluez bluetooth stack.
Homepage: http://www.bluez.org

Package: bluez
Priority: optional
Section: admin
Installed-Size: 4092
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libasound2 (>= 1.0.17), libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libedit2 (>= 3.1-20210910-1+apertis1), libglib2.0-0 (>= 2.31.8), libudev1 (>= 196), kmod, udev, lsb-base, dbus
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: pulseaudio-module-bluetooth
Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Breaks: udev (<< 170-1)
Filename: pool/target/b/bluez/bluez_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 975400
MD5sum: 87e9dd3fcad3cc0f74fa094724a53a1c
SHA1: 02982d8ff88d66319e1fce41a3ed79c30553f2c5
SHA256: e2a385a0eeb0fb176c0c154fd2ef769eaa360eba38c5f4d2dff9624efb2ea3ed
SHA512: f3ba3512b42ec7fcf6d29be7184727f07bec5166bf616c6bfa0b99275b99888eb4d52517009d655da81f3b701ecde604d24fd4f9a8140af98fedbe37fc8a2d9e
Description: Bluetooth tools and daemons
 This package contains tools and system daemons for using Bluetooth devices.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: foreign

Package: bluez-cups
Priority: optional
Section: admin
Installed-Size: 236
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0), cups
Filename: pool/target/b/bluez/bluez-cups_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 109552
MD5sum: 7829ae4ce9b55bb3132498d2c997a610
SHA1: bdfdf107578d6df7bc5b8a7efd5b8e3b36db1740
SHA256: 3b35481026685b4fd9b66b3f3a48848525271723cbb8ce35cf6945deec2b50dc
SHA512: 4c3a0dfcf08ab2dac746e39bca8e552de4255e370aff1dcc6a9311a4c008d88345c4c3c1721a02b3d22e3de8dac3c43d250babb44bbdcac48bebcd7276f1910e
Description: Bluetooth printer driver for CUPS
 This package contains a driver to let CUPS print to Bluetooth-connected
 printers.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-cups-dbgsym
Priority: optional
Section: debug
Installed-Size: 193
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-cups (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-cups-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 158152
MD5sum: 182aeaf42e3c1dd106945b7cfa3f0d77
SHA1: 8fb6a233ddc8db02678580c8f021456d503a90ae
SHA256: 9a13cf06dfeefcff176a146aacf211774518f46829e94a03c7d622ab63731e48
SHA512: b22d6fadf7142ebe27737a7a9fbd2a9a41c1738c351a89a450a2f32ead5193a7b016f4eb009f030916e75c28b3caeb0d007c25e9f561b9176746ea95e44c2db5
Description: debug symbols for bluez-cups
Auto-Built-Package: debug-symbols
Build-Ids: f3efb10cf05f1897242be11459eeca3b0504c786

Package: bluez-dbgsym
Priority: optional
Section: debug
Installed-Size: 4788
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 4043476
MD5sum: 8a02ed16fec4db44839116e65fdb3b28
SHA1: fd1975cbcf45b0bdf5983265a89b54c47b2b0458
SHA256: c0b7421cd4174dbf876ac633cfedc28ad74c30b88aa5f2bbae39105caa7067fa
SHA512: 094c0e639baed8ce069cdffc90b730e3f4b261425f375ede4c40e1f4fa2e1038e3d69e840dce9a84ba88e87fcdff05685873de30ce3d05df3caaaf2286592690
Description: debug symbols for bluez
Auto-Built-Package: debug-symbols
Build-Ids: 0e933d2c2cfb54c6147c0eb3ca01360d65129a07 1aeecacf45983c6bd1939d7cd40feae4406eeac0 24cc013771d2e2d7aad3dadc049059f86e111f2c 2c736a131ae81a1443804a02ef471b3ee7e136ef 3cc0d6bad015d187861527ff677575a73546386b 4083a387af6d3d163de7b907866a0c61648f3286 4920101610f3caf2fdfc75a88dee295f0518a220 61077a402b157a5dd8199f8c612376c577845645 71c546cbf3f000cea7d40f5c7cf4a309ac954b20 72d6be4aa49b2c7255ccd9445a0300850a8f804d 78947aefd8b9f426b68c0860cfc4c1cb4a1d3d47 78a89e28db5196133eb7c0cb62f78179ffbe9daa 8a933a250dc840533f8984dffc567a5a67e00e07 9b2615f0812864c87b2f6f205568c3a6ab24ca8b a71d63927af69a27e4209c4f3d01294aa41e5de0 a7ed066730d83dafec1f941c023365b3f7c34f59 b4f4bb485c30d26813acfcaa2bc4a00e53c0cb9b c2f4d330fac03a18e0c9b1e2362919da7e5e6323 e2101ac2115f43b5e9357c988d66f93a0780acd0 f4244ef765cd009e4dd8b118b1c221bbacc38e99 fce6de81b818773de2e8e7edf826453b3d7299ab

Package: bluez-hcidump
Priority: optional
Section: admin
Installed-Size: 465
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.4)
Filename: pool/target/b/bluez/bluez-hcidump_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 200056
MD5sum: 58fa253f9231aaf25afc71899c2f846b
SHA1: 896cf5e51449d185cee018ec67228251d818088e
SHA256: 95f43947bf7d04287f7bda3c08951c043423c81bb460af2ec7109e6ad446b1fd
SHA512: a2b6b27801c098245d644bb9551c129b179ec7551e747f077d1ce17bc30b6352b7e4f443f398daf3a85468114def4704e6d474295419d6e63eab75e8053d3b22
Description: Analyses Bluetooth HCI packets
 The hcidump utility allows the monitoring of Bluetooth activity.
 It provides a disassembly of the Bluetooth traffic and can display
 packets from higher level protocols such as RFCOMM, SDP and BNEP.
 .
 This was the software that is independent as bluez-hcidump, but this has been
 integrated into BlueZ from BlueZ 5.0.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-hcidump-dbgsym
Priority: optional
Section: debug
Installed-Size: 593
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-hcidump (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-hcidump-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 561408
MD5sum: 6b88479a6ebb9c67cb22a6207594d867
SHA1: 8896246336aa3ba08084c6f249c336d64db01d9a
SHA256: dc899c260b72414c12ba2b141d2b0f6983a1ad31613817958a57e73459fcb8b3
SHA512: 4e12a6f6ea7f769b74148276b9b839e2bb2066842dde2c062b2851228ae33b462f6fec8959038ceaf5d114fb270c8e9ef649e6bd6ec69f883cc01c36227e8798
Description: debug symbols for bluez-hcidump
Auto-Built-Package: debug-symbols
Build-Ids: d311b261fe0903b5c9e9bd8ee486e3d179226e61

Package: bluez-meshd
Priority: optional
Section: admin
Installed-Size: 590
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libedit2 (>= 3.1-20210910-1+apertis1), libell0 (>= 0.17), libglib2.0-0 (>= 2.28.0), libjson-c5 (>= 0.15)
Filename: pool/target/b/bluez/bluez-meshd_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 252992
MD5sum: 2847469aa22a67061ac358dce99a62ce
SHA1: 5ac013637cfe2e35f9570d75ebc6129264b3a6a7
SHA256: 4ec1edf607d388a7737782cf4d4d1699dfde802f544a9e7bd2e52e2beb96d1db
SHA512: 51811a486a318ba630ea1f4497f1229d36a6990bffd85d06f1d3967e3bfb8f36954038e4280399eb3bfc9a47e4e7e668ec276a4e9310c617d337e1e82b0425aa
Description: bluetooth mesh daemon
 The Bluetooth Mesh network is a new Bluetooth feature that extends "Bluetooth
 Low Energy (BLE)".
 .
 This package provides daemon (meshd) and tools that provide Bluetooth mesh
 functionality.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-meshd-dbgsym
Priority: optional
Section: debug
Installed-Size: 944
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-meshd (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-meshd-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 828080
MD5sum: 9b37570c818af6776280c23e44de9a60
SHA1: cded95ff8f2aef9f421409bf427433e41919daa4
SHA256: ad950a9fa9e8991374d5a80666797f23bfe6c7742e70bb2a6ca97bd934ae936b
SHA512: 0262b0f8360828e9c10b7b4f4461efefd3c96e94a740078caa5fc05557b8c377d9d1a5b93b322485f60e917416ff5b207c13c36e3941444bf6a4c4e184b2fce1
Description: debug symbols for bluez-meshd
Auto-Built-Package: debug-symbols
Build-Ids: 683c08ff508c2109b1151003c38b29a10b3a6fa5 90ba1ea687eb288b0eeeda8c0399b0190f2288a1 c049b09f6a3044de049eb5f97e70bc2ecf24b178

Package: bluez-obexd
Priority: optional
Section: admin
Installed-Size: 447
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: obexd-client, obexd-server
Depends: libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.35.9), libical3 (>= 3.0.0), init-system-helpers (>= 1.52)
Recommends: dbus-user-session
Conflicts: obexd-client, obexd-server
Filename: pool/target/b/bluez/bluez-obexd_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 202676
MD5sum: d01f0f6d6686e80fbf413ff615344d65
SHA1: b7020df96156beb1b8c3fc06a4c1f947da5ef4a8
SHA256: e2e392577b20bb45cc4c55fdcbfb4bea94c36b3963ce3f7e94806c834f7d9559
SHA512: d4265d6ab641cb0a46d0453629cc988eebcff8793531fc4276993e6459f508a3c0844475b21d8f8bc09b1dcf82e941bf67e8292c038482ca570a7edbe9fe4d62
Description: bluez obex daemon
 This package contains a OBEX(OBject EXchange) daemon.
 .
 OBEX is communication protocol to facilitate the exchange of the binary
 object between the devices.
 .
 This was the software that is independent as obexd, but this has been
 integrated into BlueZ from BlueZ 5.0.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-obexd-dbgsym
Priority: optional
Section: debug
Installed-Size: 574
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-obexd (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-obexd-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 491168
MD5sum: 5bcb871703d46becd5d05d6f9af7605e
SHA1: fd10113fc154af93359c7d1635c22493d68c4c1b
SHA256: 0a3cd1980af0436f8580d703fc65011a2cf03255291a1606cff06637eafcef58
SHA512: 3cf1d5bb7a229bb90a1a914b1c5725970a61703d0353b878df8ac0719be7de5d9b9c5c236cb51d73c3851aa38e070265d9e5ce677afe213074dc504ab6fb02b8
Description: debug symbols for bluez-obexd
Auto-Built-Package: debug-symbols
Build-Ids: d13d1784b249005399ee34b525b51f36c757061f

Package: bluez-source
Priority: optional
Section: admin
Installed-Size: 32998
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Filename: pool/target/b/bluez/bluez-source_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 33706904
MD5sum: 0a8d6a542f6bb3411ef8d5eda8188ecc
SHA1: 24f197c77ae83dd363feb9b32c30108aa3e538b5
SHA256: b58c518384267e4142af0e6b3cda0896cb6bef2cc8da766607d6bcc85a00227f
SHA512: 826135247f5710f63314071ebdaf6919cfcb4f0f32b782613d4d0f83d2131ccf7b2797cf05ab65eff6a897966710fc74fc78d7bec07b925be242edab26e5ca89
Description: Source code for the BlueZ Linux Bluetooth stack
 This package contains the sources and patches which are needed
 to build bluez.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-scripts
Priority: optional
Section: admin
Installed-Size: 297
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Filename: pool/target/b/bluez/bluez-test-scripts_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 83504
MD5sum: e8b3c3f322a96e354432e24b9994f2fe
SHA1: ef158919c110fc676acaa6319dc3c795eb725e8d
SHA256: 3d4c6f7eaf7baa45419cba0d1742571a69898a1cadc994c3365355f9bc1ba0e8
SHA512: fa90af13b890c11edd6efbedaae2efda7f2e5d5b3e8048385eed0432e12abfb3c7799b9429ee5b5c5f38299b5e6beecc83daedf1d77dbba15804582c434fc9a4
Description: test scripts of bluez
 This package contains test scripts for using BlueZ.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-tools
Priority: optional
Section: admin
Installed-Size: 1996
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.10), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.28.0), bluez (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-test-tools_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 285732
MD5sum: 2a18916b3f3f187dd391c74b0642f3ac
SHA1: 56bf11029e5da2de353b79a61736067410be1b63
SHA256: bf549ca4e8739c43d2972536cde71e70b45e135bb007613e5f9f06db5ae3eb07
SHA512: 03bb439eca8382e7297d4b207b4cc18b1100a9d357c46232e6573eb514d48c3343a6ab06129a4b7dfc5e1bad60fea90e2f246d37bd1eb0d0269d4c0abbaa0765
Description: test tools of bluez
 This package contains test tools for using BlueZ.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 2282
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-test-tools (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-test-tools-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 1849756
MD5sum: baa8f99038e5d62f9aa695f9c7bb7253
SHA1: e6151bdc77a52dfa0549924d0fa9b543d74a3027
SHA256: d6738fe9bdbf9f47b251e9a1657ba300b8eee7765225e48e439ce425a1bd30ca
SHA512: fc44ce1dfe529fe0909abcf89e705679333ee7957bafc766f554d0409fe2d3b13a50bedf0be4ddfeb77e839937d56918c0b0ebddcea1394c36b1fe78066f2fda
Description: debug symbols for bluez-test-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0e7a4ee072f3dd232aa4dae09b8f80912ecadac5 22c20f5ee33dce73c06fab6e15539053def962c9 3c5b0c7acc36361ddd882d8be44d915c32aff207 88f1095573d1ab665704752aeb76ceaabf288ba0 95554710b3b26951146d433015dadceb7365948f 9572805eb6d0828fb4af31aa01f71d741f55a37c 9d50be3d624dd1ff3b5e767b0e2c76054fec8209 a16dc523b5e950d8b42ac87894a76c29ecc9aff3 c77cca885987e24507d10381cf513a922355ff66 d117a3380e1cda15625b5dbf80bca6473ed77ac8 f66c447d91d3e51f1544b9f6da8f68a69c062e17 fd7dd66538fd59b67586494c91ea8bf8403afddb

Package: curl
Priority: optional
Section: web
Installed-Size: 363
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libc6 (>= 2.28), libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1), zlib1g (>= 1:1.1.4)
Filename: pool/target/c/curl/curl_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 265276
MD5sum: 9f6286aa56ec8e80173dd861db8c12ec
SHA1: 45f6a0607a4ff9efe6ee7230ec7c3d0b2a8c55f6
SHA256: 65febf5d0cc7cfdfb941554f548acbc50e71ad11a75f4d5ff79d9c9b770f6759
SHA512: 3471ddd04f93ed3099e22cb13b17bea671cf451d9853161adbe0b78c5bc6e909b25a0da472bee59c81de72c3b8639fa3ee272348f1365ba4b34c8b2833c1c2f5
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: http://curl.haxx.se
Multi-Arch: foreign

Package: curl-dbgsym
Priority: optional
Section: debug
Installed-Size: 166
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: curl (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/curl-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 141560
MD5sum: 36aec600a2777bc7196e465a59a7260c
SHA1: a48c76670ecd601f1056204b956ae7284237d034
SHA256: d4f8e19643e0410e9b143242a029828a5b9f6c9d6ddf59296a4c3930dbcec8c4
SHA512: e921b83a736a567a8d29f39cd0f42740e4e1defa7521480027cfbfa5762b0ccd4bd8a5446dfecf36b314798d56346ccf894d54ab6874152259cb44eab7362e51
Description: debug symbols for curl
Auto-Built-Package: debug-symbols
Build-Ids: 50e711673b1a720e9c47354dbeec5d008b632b22

Package: gir1.2-gst-plugins-bad-1.0
Priority: optional
Section: introspection
Installed-Size: 2074
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), gir1.2-gst-plugins-base-1.0 (>= 1.18.0), gir1.2-gstreamer-1.0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (>= 1.18.4)
Filename: pool/target/g/gst-plugins-bad1.0/gir1.2-gst-plugins-bad-1.0_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 1955624
MD5sum: a7508d0525608812c9403141e8adc443
SHA1: a768f621b7e90777cfc9405c7af40fd68ee8ab93
SHA256: f3401c1b427a7792d7719633a1605522dbd56a08155aeb0e565dd1687787223e
SHA512: 7a0f3d810e22d5cc56128b252760aba95cecd3140cdd4bda93a81c0b57f11bcb15ad001ac2b154bace637a61f92fb2e8dcbfc20f24ae495a444b461c7a67a955
Description: GObject introspection data for the GStreamer libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains introspection data for the GStreamer libraries from
 the "bad" set. It can be used by packages using the GIRepository format to
 generate dynamic bindings.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gir1.2-javascriptcoregtk-4.0
Priority: optional
Section: introspection
Installed-Size: 469
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: gir1.2-glib-2.0, libjavascriptcoregtk-4.0-18 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/gir1.2-javascriptcoregtk-4.0_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 214540
MD5sum: e697965e4ce999619c9599691a886400
SHA1: 9ced00865edff6f3edb935197686f0e70d6a4136
SHA256: a2ef4b633b2f8f0231504cb9aaa76b6720300a24dc5894fabb981eb0142974bb
SHA512: e393b976f0409c289f06bdf5c8ed9c809c7e26d601f5e8d43df1d3a55e61cfaf138fa4022746759767c9d69930a3be9382bfd247de2ffa206dacd14c67ad408b
Description: JavaScript engine library from WebKitGTK - GObject introspection data
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: gir1.2-webkit2-4.0
Priority: optional
Section: introspection
Installed-Size: 762
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: gir1.2-javascriptcoregtk-4.0 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), libwebkit2gtk-4.0-37 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), gir1.2-gtk-3.0, gir1.2-soup-2.4
Filename: pool/target/w/webkit2gtk/gir1.2-webkit2-4.0_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 267212
MD5sum: 836f090af3ef4b1012b9fe4d8ec89db2
SHA1: 38bd7d5c40b488e4394308e075b1b7f1b00d0d71
SHA256: 7a54b30ed12d14c9efaa3fea21b0c52741f5b437eea9e43324f8e5a62c2ca618
SHA512: 040f176f87fc3f8a8facc0464134f473aff14761e4535f0a0bb8cf2613c7b3593493a3baf86a44b63b26f0aadc6854b028b4e582a1926b9ac977be417a48f434
Description: Web content engine library for GTK - GObject introspection data
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: golang-github-opencontainers-runc-dev
Priority: optional
Section: golang
Installed-Size: 1301
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: all
Source: runc
Version: 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1
Depends: golang-dbus-dev, golang-github-checkpoint-restore-go-criu-dev (>= 4.1.0~), golang-github-cilium-ebpf-dev, golang-github-containerd-console-dev, golang-github-coreos-go-systemd-dev (>= 20~), golang-github-cyphar-filepath-securejoin-dev, golang-github-docker-go-units-dev (>= 0.4.0~), golang-github-moby-sys-dev (>= 0.0~git20201113.5a29239~), golang-github-mrunalp-fileutils-dev, golang-github-opencontainers-selinux-dev (>= 1.8.0~), golang-github-opencontainers-specs-dev (>= 1.0.2.29~), golang-github-pkg-errors-dev (>= 0.9.1~), golang-github-seccomp-libseccomp-golang-dev (>= 0.9.1~), golang-github-sirupsen-logrus-dev (>= 1.0.2~), golang-github-vishvananda-netlink-dev, golang-github-willf-bitset-dev, golang-gocapability-dev (>= 0.0+git20200815~), golang-golang-x-net-dev, golang-goprotobuf-dev
Breaks: podman (<< 2.0.4+dfsg2-5~)
Filename: pool/target/r/runc/golang-github-opencontainers-runc-dev_1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1_all.deb
Size: 233996
MD5sum: 6b66741335663485105e3256e02215fe
SHA1: 5c6aab1ca30d1f82f7412a2ab4d5973f178ae2de
SHA256: b2aada4e357a06a80ab00865021d24347ec94fa734a195af3a793da4dc8bbb80
SHA512: c1d872f2222d33e6de328410b0d5c7a3036232ec68d0d8ffd33a39b8899776291c301a4163cdd4d79b0d72d12e84f1f281b401b0aa5546b2eb31fb8e48e1831f
Description: Open Container Project - development files
 "runc" is a command line client for running applications packaged according
 to the Open Container Format (OCF) and is a compliant implementation of
 the Open Container Project specification.
 .
 This package provides development files formerly known as
 "github.com/docker/libcontainer".
Homepage: https://github.com/opencontainers/runc

Package: gstreamer1.0-plugins-bad
Priority: optional
Section: libs
Installed-Size: 6230
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-plugins-bad-faad, gstreamer1.0-plugins-bad-videoparsers, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization
Depends: libbz2-1.0, libc6 (>= 2.29), libcairo2 (>= 1.6.0), libdrm2 (>= 2.4.47), libgcc-s1 (>= 3.5), libglib2.0-0 (>= 2.53.2), libgstreamer-gl1.0-0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), libgudev-1.0-0 (>= 146), liblcms2-2 (>= 2.7), liblilv-0-0 (>= 0.22), libnettle8 (>= 3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22), librsvg2-2 (>= 2.36.2), libsndfile1 (>= 1.0.20), libssl1.1 (>= 1.1.0), libstdc++6 (>= 4.3.0), libusb-1.0-0 (>= 2:1.0.8), libva-drm2 (>= 1.6), libva2 (>= 2.2.0), libwayland-client0 (>= 1.11.0), libwebp6 (>= 0.5.1), libwebrtc-audio-processing1, libx11-6, libxml2 (>= 2.9.0), gstreamer1.0-plugins-base
Suggests: frei0r-plugins
Conflicts: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1)
Breaks: gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 3452172
MD5sum: 98f85ba5ac43ac7ae87a63503d976490
SHA1: 87306ec40ee1c5e5314aee9a37934b60b8f40916
SHA256: ddd21223a2e330c2caa1111169091a54fb0d01c45b406fcab2732f67441db52d
SHA512: c66a52875e6a0c0ea5e6391203fc14de7ed64bd20618177b03d586702a86afcf312cc6db39905c04cc39bc00bbba6d15105b98c0c4f4141051d0e7502e90e1c1
Description: GStreamer plugins from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-apps
Priority: optional
Section: utils
Installed-Size: 1965
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.44), libgstreamer-plugins-bad1.0-0 (>= 1.18.4), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 1933580
MD5sum: 803535db458e5a27e98ae7b2cc4ed438
SHA1: 845f2d88772229a01319f41b9dd3bb7d4fe46769
SHA256: 32131266bf39061a2a0bceed2c4b2422ebb6c9b2b86adba15d979ba22a3010fd
SHA512: 251022a8b16388e3324184ea753a5392be36e4084b79a86410688ad459584fa8cf329adb4cbf24b8d47e9ac694989d6940f21e54c64db0b6d006085e5fbcf578
Description: GStreamer helper programs from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains helper programs from the "bad" set, a set of
 plug-ins that aren't up to par compared to the rest. They might be
 close to being good quality, but they're missing something - be it a
 good code review, some documentation, a set of tests, a real live
 maintainer, or some actual wide use.
Homepage: https://gstreamer.freedesktop.org

Package: gstreamer1.0-plugins-bad-apps-dbgsym
Priority: optional
Section: debug
Installed-Size: 36
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-apps (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 19896
MD5sum: bac6f576e2ac1fd954c8437ced55c37d
SHA1: 4d91e5c8d2207dd522c4b9866e6e2e7a599687bb
SHA256: 505f5569360b4a1e7307abea6dc55cbd0608882c1af927838f4467004bc669b9
SHA512: a06d9ec18007c9d90bf89507ee65ad9f56bf3fb86c0e57d7af85747482426e88bf87884ba183a220de76601e5fd3a334fd98d3703b4b57e7092ae6ea68205ed4
Description: debug symbols for gstreamer1.0-plugins-bad-apps
Auto-Built-Package: debug-symbols
Build-Ids: 5787e9a7da5c62d0e2ae739fa3f63a4ec4a8efa5

Package: gstreamer1.0-plugins-bad-avtp
Priority: optional
Section: libs
Installed-Size: 2017
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libavtp0 (>= 0.2.0), libc6 (>= 2.7), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-base, libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 1955668
MD5sum: da48b783632051b9922b3016e36dac98
SHA1: 0b750adaedf3a871b6390f79c22b8d0c565665d3
SHA256: 644e0ec557df2bac92b7a06e9433d700ed1a2c84d34a550ecc34fbbc10dd1ea4
SHA512: 1ceaebc05cd8b41bcccda10a5a3973f3bf7dcb0a54bc284b05457a882ba9daf5aeca7babd8ad56ed7f3d2b14002d36525b85d12415948179c1f66a72bde9fe66
Description: GStreamer AVTP plugins
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains the AVTP plugins.
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-avtp-dbgsym
Priority: optional
Section: debug
Installed-Size: 119
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-avtp (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 96000
MD5sum: 7d4db476dcba0f136c59400acd4ecbb4
SHA1: 53a57cd98a369c2cdc748503de04e2db6e65faa5
SHA256: b4a9cdec4cba9d32c2443d1d4ebd92e35ee56350b223bbba43f2d3a292a731a7
SHA512: 744648923bcfa665b065b5381e503520b2ba7ca28ff3ded33af9e4b567bd182c3d3d3cfac15ef068de210cb477e59b3b6a0b0855eaa99884824afcc44bae2b40
Description: debug symbols for gstreamer1.0-plugins-bad-avtp
Auto-Built-Package: debug-symbols
Build-Ids: 913e60bc1c2f818c81040d0007cf265ab2eeb326
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-dbgsym
Priority: optional
Section: debug
Installed-Size: 6229
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 5011840
MD5sum: ac193c80932e9c6e4628026be98bb347
SHA1: 1dfc9237b176f7cc7fc3d18635200096ef077e42
SHA256: a5f02f6593d6ba544eefca1309a5f59c88f97782a1f02134571cdbea4caec241
SHA512: d3a938ee1bb7391864903ea78eea2ea2e8b62d6ec9d0eca9f3abe69757c0f57497b57c633dbb5d84cae6f5409891899859fb9c82bdc4ec2de8de8216ffbbe062
Description: debug symbols for gstreamer1.0-plugins-bad
Auto-Built-Package: debug-symbols
Build-Ids: 02f3fda7134738915b98cd38fa35b1876a8afbd0 05333360e1b80a041dd556a4715a42373214767b 05efd91b5828be06c27562361414482bc0920671 06fc0e25dffe5a7f2ca5f602f179e2933e528d21 175b15d595bd24c6233acabb3042a5b3e19c031f 1b6a885d430ab94757b83e5941f46931787863c8 227fc7892aac846f489567c4384cc3971dec746a 24df8cb0e8628772156bab2562d27d60f6c2f68a 2a40dbbd1995d19c734be9a6bf13ed24a8eda2b0 2c4a12593178d53e4f0552412578fb4979d9e5a5 2d2a8f12efecdfaec709ae378e08a6bbce8e070a 319cd42557f550155291a18c4cfa0787c076a51b 39ea1a68399fb8bf151456dbc060b1adbdca5c08 44fc6a4436778e24ac082c46177e37f3a34bf838 454bfc347588684cb0dc8ffba0ff0e238226c20a 456eff30a2192e42c2a94cb7c7d997e638d618fd 485d00c195c28a0f84ea6321baf9da7a0809fe4a 4d7486a76f80023a95c0e969647e0a20fbcf44f1 4db65f041107b81c05561454c7a0b9cdf5f493df 4f5610f17e1635143388e4d623979a819d88fcb4 518fad8007f59e9e409aed074d8e04d86c621f93 540a6a1618489f72746bad9c1e5a2742cde1c9ab 54514aeda10d6dcb688ea87199ee1555d72bed2c 582a50020ccd6c56f06320f7891ee4c107326b54 5908f6079ceca91304c2ec2412861719ba0ea809 5ca31dff4839052d665871b5d52fb3fa91e8df47 5e6f529f92503753e7a5c987e070cfb58d513f4a 5f99ca6cc97c62bf9a9922915485617e36ee11e7 661745db71523268433e0db8936a0bf90edeb477 677daf65c6c66fc4b10f2c16e7914565599623f8 6841a044cf2a6d9514fe5291f6c51df5c87a27a5 68ccf8922586e99cf8b7db101ee97da69381c729 737be7044a77de4ad47e8ec6d0f48105e9e91614 75cd7990e33bac1d822b73167c4e95dfa2b2290b 798dfd526412a53bba49aec262c882743b1bbf9b 7ab47bfc1197d9787cac86b36f3ab01e3c61e92d 7bc0e852e5f7ea57861283621f6fefd6cfb9f25b 7e74514c63d80a1213b995813fac7e82754b6396 7e904ab4c0242a43c4bf1a4c18a81fab5d4543ea 7f7abb7aefedd7d806ad8786c1641e96ec564c1d 898f8a88227c3b5d5dd9aaec0e6d92dc4c0e87b6 8b6365eca0d1cd116a8ac53f0954ba44a54dc272 8ef45cf9f73a85755fc24901b0e6cadf3f10a39e 8f4c7e61969c4c120df6f7013b141717d829a480 9014e3709b10067a6e3c8f67bb4b6647e24bbce6 92ddac37837abce6c9103b9b9650e1239371d1f3 937c05b4eeca6c0c5289dd00745480d74a092c53 956b83aa6d550942075ae5d0ccb65a9da973d7a9 99d6e3b999ae68aa2d35ba05d033b68ebea34ced 99dd09fcc23a08d5dc07ce9e25f2eb88eb084a2f 9cbd81d3f17f13c06936d56467bb1de6ce24e182 9e4e52a8dff80ca22d7eea9262f4bd4a74976146 9f21dee5d8764d8a1ce397a3ca43cf742e075b7f a3bc4b3509a1391da060881a7f8f597bf5b66536 a897056d016df31c35742fe9d38eedbb3944d185 ab6d3b1732abe5a7ff323e5a4c0c55b61b12a548 ace47fbd91d3dd24a3d191d4b2ae49606a174ad9 b04b682539b97b40d2517f1dda4de36fbe6a7118 b49ac6f9a00f1dc9e0f076d2a31d080b1c0a6ef7 bd078157b0d6bd95099bf143ea3621c24bc0b5c4 bd195ab9874ae6d54c09c59956ccd27b49fae672 c5f4ecfe80068fd3dfc9ab5010e44cbece8401ce ca15b0c7297e89c40b05b57790b8cf741bd1039c d0fd25c4ea9726e21163ddafc75197ca4e40b451 d567d48d90401b86b05e04faf65c98b4f75c3dee d8bbba58faa9256a296e655e638f899cd98ca513 da420ccff0a07a712a7fe23a27e6e5aa75463505 db18d5c311529c8415160c091212936b024ecfae de4f9ccce7ccc01691aedde715eb0832a0e4c6c5 e40f8796d68daf5f4c3f2ee05364ea45b781a936 e4145b994df1df9be8f1b33670804d147471433c e8fecbe370dbf60b499ec4bf423b3e052b9962c6 edb512ece41978b19e3c9d80e8c66d392df8d3b7 eecab2cfc1cc1edaa99fdfe6b7f043c7f0830732 f1e613bc937eef0a75864145224382e1f049da2b f38fa30bb1ff1f7b4498ebb19fd8ca089727c9b9 f3b4b4c88acb05f333065cc3ecabb4eb9cdb9918 f5c074d81defe47e0f275221579dc23549203f59 f630d629e982a5ac4f1ee0e4c095286e794e35d3 f73604aaec4cbc9d051aac8c9ae21bd93131db5b f9bc1b881ec7b56d31fe9a79a6190892bb3ba6c2 fa6e91d5ecf0e876a23a2e9bb3f844af96229d4d fa701c4d96d0fc68448ba29ff504de17681962a7 fb805f267b855f78df70117bdbc8dce6cbf80da6 fcfe0289bcb7b068b9a3b1082bf3a64e34efc7e9 fde0cf2a0bebefe87b49a076c68819a4e5bd2468 ff2457eb221ddcdf3616167507f39f8cc53407b1 ff2818932db0206cf3afc14be53894d5c10ce021
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Multi-Arch: same

Package: libbluetooth-dev
Priority: optional
Section: libdevel
Installed-Size: 625
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: libsdp2-dev (<= 1.5.2)
Provides: libbluetooth3-dev
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1), libc6-dev | libc-dev
Suggests: pkg-config
Conflicts: bluez-pan, libbluetooth-dev, libsdp2-dev (<= 1.5.2)
Filename: pool/target/b/bluez/libbluetooth-dev_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 230968
MD5sum: 44eca57af3a0287d0c5eda33d6f4a5d7
SHA1: 1b624befaea9adebc45e1a061d294b26f995eaaa
SHA256: c8bbac94ede4001eef90762bd039b72a78091857847c53dc3facf3ae5924bb08
SHA512: 6e6a2485455579ff36043ba807e83b91beb467c9dc19810e01a2ef7f376c1197653ac57d8bb77be98c651cb7c929fad6adf2a05d15f5cdb4dce6ab92703721a3
Description: Development files for using the BlueZ Linux Bluetooth library
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
 .
 This package contains the development libraries and header files you need to
 develop your programs using the libbluetooth library.
Homepage: http://www.bluez.org
Multi-Arch: same

Package: libbluetooth3
Priority: optional
Section: libs
Installed-Size: 253
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: libsdp2 (<= 1.5-2)
Depends: libc6 (>= 2.15), libudev1 (>= 183)
Conflicts: libsdp2 (<= 1.5-2)
Filename: pool/target/b/bluez/libbluetooth3_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 111252
MD5sum: 1dafe4ed4f5b97b5a367cd10f28679a0
SHA1: aa26b5f47477eb3c0a758985397f4237e83538bb
SHA256: 5c6f9e6c785b43e79ea151295e07ec2177daa6120efbca7aa182ac9e59059d1c
SHA512: f6b9d0978b105faca073fc3188d0906493d006ed10e89fa60569e791ee566f079f0fac65e08493e760b07b4d6b401dd7914e52f17e43a77b873b1b07b7cd0cc5
Description: Library to use the BlueZ Linux Bluetooth stack
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: same

Package: libbluetooth3-dbgsym
Priority: optional
Section: debug
Installed-Size: 174
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/libbluetooth3-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 134004
MD5sum: e2bf8a27d3e642a5fee421156c5ad525
SHA1: 19bb14fa4d7780c53fb1a2ae1e8c292195731cd5
SHA256: 86b5870ce292096c37197a8ef62ca576f17662b2816d108f5990cf81727f8c42
SHA512: cfa3cc36c270537df7ee967020a2a7a064a8395a2a07c516a90f622716bf8530486a8fd00f7bdf29556d93168c79c6ef62faccd5a3fdda71d21411b375cbde56
Description: debug symbols for libbluetooth3
Auto-Built-Package: debug-symbols
Build-Ids: 5fb407238c5eaf4cb4ad8e47cd306e5a6ce3dc41 87252955c2286dbaa041ebc16a18da40b8ff3cd8
Multi-Arch: same

Package: libcurl3-gnutls
Priority: optional
Section: libs
Installed-Size: 514
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.28), libgnutls30 (>= 3.7.0), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-gnutls_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 313824
MD5sum: 01fb2d4265597b13f4a654e14e29f71d
SHA1: d5d71bc0d46d273d561e74400f8f737b081ab0ed
SHA256: f8b4a820aaa15c7653c9054090e3f68301cf22861c52b7de218ec71ba65f42f5
SHA512: 9372ea932d86fe1f335f1f044959c5f91cd4af413b777d3af6429c79cdbbdca1f189b5b489f424c3b1912e93785914a0da45a5bded4714c5b22b206bc7cc7030
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl3-gnutls-dbgsym
Priority: optional
Section: debug
Installed-Size: 873
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl3-gnutls-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 803996
MD5sum: bc9b8d4b1b87d6825c97d600e1180b4f
SHA1: cbc36b7531fe49ea148a48d2b0321f7ea0852543
SHA256: c7d9cbd81f9a8f7b7c3a536b679681ed064218c695733ac6a0cc042638161c34
SHA512: 92a9f27d01a9195386f72162993c0aaae46c1c0acb14fa82f0b989b396aa0fabe002baf3276250ae10710a685bfe4467e18fad9455a6b8ef7114e4eff60d16b2
Description: debug symbols for libcurl3-gnutls
Auto-Built-Package: debug-symbols
Build-Ids: bde3cf9c0b66d7bccc4ba73fef3dd8b81b4ab9bd
Multi-Arch: same

Package: libcurl3-nss
Priority: optional
Section: libs
Installed-Size: 522
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.28), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.44.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-nss_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 320212
MD5sum: b8750895e07589d6d4c77ebbf768ee34
SHA1: c2941ebbd2d054949bb84883beba25a0ccf81435
SHA256: 33a4b5d42e4de55cf014c7774f0501a70ba60cb6f36b4292bd64ff0e861c0159
SHA512: 02fa879def6a592cf9e81bb6e0d3f61c8fa432008ca2785d302da8bf96e37b5ad9ce4c7edcaca07f14611d70874146007a6880d5806668b5f7dc0f8ea48596b9
Description: easy-to-use client-side URL transfer library (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl3-nss-dbgsym
Priority: optional
Section: debug
Installed-Size: 914
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl3-nss-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 846808
MD5sum: 57a457b4cfdd25ed61d811f65d8e4e95
SHA1: f0a37d6660974ce382da59c3d2b0ea0468277880
SHA256: 79162e2bb97e3b9b74eac75b03b9c70123292adbd1e355cae821626298db3289
SHA512: 22725c27d3a7a2a086caeafc60182b1f75a160bcb7f1bce0cae00d2a7477d98a9133348eb9cc1f851c69872a9c71cb5daddc982de7a1282208387dc3a3dc16fb
Description: debug symbols for libcurl3-nss
Auto-Built-Package: debug-symbols
Build-Ids: 2aa59f7f303dcd81cfdab15b849b2ebd8900e1ea
Multi-Arch: same

Package: libcurl4
Priority: optional
Section: libs
Installed-Size: 517
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.28), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Filename: pool/target/c/curl/libcurl4_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 316552
MD5sum: f9de1368d3d128a6b9a5386788f8467a
SHA1: 3a20b8072dabf358fd2e19df8b6a3051aefd7288
SHA256: 8e95bfdd7e1e93b5d901c2febc7fd2b4235ab5e8c8abea0a7b66510a86478582
SHA512: eac9f0af51cf688f93abcae5e60f5e8540a3b13d7b8c05d172169827b63b96869049baa86fe9316436cc9b07ee490d1b2aff96bd1f77d07c52286816da9f6fd9
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-dbgsym
Priority: optional
Section: debug
Installed-Size: 895
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl4-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 823964
MD5sum: c94d6209fe1041abb5903c4a27b569f6
SHA1: 278b090aa283d787d07ab28e5506609bbe843a3a
SHA256: 5dba50ea468daf17c11a0a9545bace5ba66105c3131a22c6f18473e085192422
SHA512: 90b52188c1c99091754fd1f1f0bd2e8d5b061eb6cc33bd96d92bfa9b15bf62b5a86c76786d4bcd0b098bec0ba9593483b5feb5b3228889e95bf67619b310c57e
Description: debug symbols for libcurl4
Auto-Built-Package: debug-symbols
Build-Ids: 1d13f284519c8e4cc96dbf7cd27035aed5ca932c
Multi-Arch: same

Package: libcurl4-doc
Priority: optional
Section: doc
Installed-Size: 1944
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: all
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Replaces: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Breaks: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Filename: pool/target/c/curl/libcurl4-doc_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 1014952
MD5sum: ad01c7962e62d32da7b2650b0b7cdcb3
SHA1: 9e175562966da7faf2b835e44903b5f7f2392cef
SHA256: c0ee51006250943deb17aa666bd881a82844531518a15593a6636b2f7456c968
SHA512: dad84f31de73b7c7e1e29816329777e7c4642a78164ecb73fcf7ecbc20b6e7763cda34a6699af967191f6e592bfda5e837ea2b37e2a7faee7a64efba3481bbc7
Description: documentation for libcurl
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the documentation files for libcurl.
Homepage: http://curl.haxx.se

Package: libcurl4-gnutls-dev
Priority: optional
Section: libdevel
Installed-Size: 1104
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-gnutls-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 409192
MD5sum: 2042c9b135e5542fbb38fafb804093de
SHA1: fb6397050f32302fd6c6a0276a37cedc0045b864
SHA256: 6a966c79892728fe0e18b0b52cd9226aacda3c6f6bb039fb3b7256beae781f35
SHA512: 58c484fd222ee88e53392ceaf8d5d803bd805a0f625a7bed7e13f2e99f227efe8526773a01ca8023b9706ca8d452a57666799f9f25d89896412928d68d2dc61e
Description: development files and documentation for libcurl (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-nss-dev
Priority: optional
Section: libdevel
Installed-Size: 1115
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-nss-dev, libcurl4-dev
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, libnss3-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-nss-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 416864
MD5sum: 16b4c196c15b5d61dbbb30c125ea0438
SHA1: e2eb3e87012cd6788a6ca9f0a190d5c7bc647278
SHA256: 82b26d37b600c90a73fa4b72e547c492523b80956049c02f29673a0776bedc77
SHA512: 0d845adf9717b15e8b113a08b8d3f843a324978d103399d1310d01c8b8bf48ed5c03fb61fbae13ac5f06132dc6b08ce2c2e3f6c5568e266cb58ba6fd5f6e6f25
Description: development files and documentation for libcurl (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-openssl-dev
Priority: optional
Section: libdevel
Installed-Size: 1112
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-dev, libcurl3-openssl-dev, libcurl4-dev
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, libssl-dev (>= 1.1), pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-nss-dev, libssl-dev (<< 1.1), libssl1.0-dev
Filename: pool/target/c/curl/libcurl4-openssl-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 412348
MD5sum: 0bfb8b3e3822f66d6260551ce3382fb1
SHA1: b53fe37348f6ba2b3024214d66440f5641237180
SHA256: fb7900c853a6327399f8254c062a64c71286d08b257dd99888d31ca509ce047b
SHA512: 886ab2759b2111c2a8aa050ff88aa918e042888a05b5796387b662603bba9e59fc708ebc12df727a76dcb99552196184b3f8aceeef0d04676ceb4d1ee2b2579f
Description: development files and documentation for libcurl (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-0
Priority: optional
Section: libs
Installed-Size: 2909
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 2283220
MD5sum: 18803ee04b6f335a49417c50ee29dfaa
SHA1: 4823fadb19f630a91d0837cbdd96dde19f64261e
SHA256: 2f83ee1293f0c861807aec84acbef9818b36ab747312b08fd03bb2f908c72e0f
SHA512: 9cfa976107b18aec64a4589e1ee2db099e05e7ab39981f4dc20e5a88bfaf77bb25e840a56333e610daf1aa044bab2aa891fcec4c37ff4da739111056004dc70f
Description: GStreamer libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains shared GStreamer libraries from the "bad" set. The API
 is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-0-dbgsym
Priority: optional
Section: debug
Installed-Size: 1380
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 1166032
MD5sum: b9f0d711ff392d48bf6dc693c81043bf
SHA1: 1c7ee4013c8f04c6b0e7989db6c4322c2a1968eb
SHA256: 23150d64a2e72f680fab3d0f7c2a5fc0321c1b22d177987d8f829ab2849ab087
SHA512: 4bdb6eb70d1099b4120809cbde83939971ac1f94f12068c6c9dec26ea66ac734656fc4d862dd9922b4d16d07c65d987bca05d6d003d3f432f62ca0998828517b
Description: debug symbols for libgstreamer-plugins-bad1.0-0
Auto-Built-Package: debug-symbols
Build-Ids: 1a707c1b258782ce2b83ae91969260498de70a37 1f994a400ebf24ae5cbd54f3dddfcf70c79ad00f 38e0d91c15f1ca8a11fe855b6ae7c1e9b4097001 4a8c51474ce36b1efade6bcf575ac1a9218f32dc 5725bceb86d5bcbe411d25ab16bbd19d88840d80 74954c2352a45bcdf90c062d427b083bde9e3800 77981857562749f37450753c00a4cd45828e0f3c 846492616f9630380fa630a9ccb7f58cb7d67a36 94ab0be0783abe8d63bf59f384f0c24149f45da2 a8360d802b5be4bce7eba873c117fd23a778cef8 b2bb832429f653573014a7714f4256289ec1a560 b7b52f5230fb8ce9dc77866639eb0843b6c4f321 c14135a48275011ac7734766eaf1eebd7676b9d1 d009c915697fbb2c21cf2fe57906ad41ff48d575 dd37de84e12122cb0a5e390aa5ebac3061e61b96
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-dev
Priority: optional
Section: libdevel
Installed-Size: 3500
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1), libgstreamer1.0-dev, libgstreamer-plugins-base1.0-dev, gir1.2-gst-plugins-bad-1.0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-dev_1.18.4-3+deb11u4+apertis1bv2023.0cb1_armhf.deb
Size: 2075408
MD5sum: 1325326a68f345ab91fdea945da1f278
SHA1: d37735b4d15e89a5cd9d63880a74791eeeb53783
SHA256: a020745a93928eabd653ca9bdc9d0a7314f007e5164c3e97bd3c79f3b7bff90b
SHA512: 44414a40cde791f1752f36a93586f038e0189bf6d836bff3d69ddf618571ce007a5661a2d652bde109a4507cf6cb7aea5eb1359f2c2ffbaa7693dce895575d01
Description: GStreamer development files for libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains development files for GStreamer libraries from the
 "bad" set. The API is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-18
Priority: optional
Section: libs
Installed-Size: 15633
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.30), libgcc-s1 (>= 3.5), libglib2.0-0 (>= 2.47.1), libicu67 (>= 67.1-1~), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 5645564
MD5sum: f42095e1349503abd419abcf117862a2
SHA1: 6221cfa54a13c3a13e96bfb4202288890d05e17c
SHA256: 5983d7e7450fa4a9402b354344ff8fcd8bfa7e4298bf3c1a3332f3a888f8f8a9
SHA512: 99cd7b28362dc63abed0d018d4ac50bec2aefaf7add263f48afa737b7557012a889a93171b5b5296d25bd27d644bba740b740a0fbb6643f0d6fc65a6f21fe62c
Description: JavaScript engine library from WebKitGTK
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-18-dbgsym
Priority: optional
Section: debug
Installed-Size: 33074
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18-dbgsym_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 28835620
MD5sum: 9a72e3131267933580eab3d136e8bcae
SHA1: 8022284c27eac77e683a728ad5c4f9e9e530c73f
SHA256: b3449209c35debef42ef2004d2c15ec1ed65fc68810a706253b11340a6a3a4f2
SHA512: 1375cdda1bd5057af9a335acc055e49ce2d99dbecca974609d8f56646a517cf213a761faecb3bddae93989647a6cb7d65aea67db1a38ce22ce0345175bac7bbe
Description: debug symbols for libjavascriptcoregtk-4.0-18
Auto-Built-Package: debug-symbols
Build-Ids: e5d8b7add44d68c7bd5b001a8457b50695f0f7bc
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-bin
Priority: optional
Section: interpreters
Installed-Size: 652
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.7), libgcc-s1 (>= 3.5), libjavascriptcoregtk-4.0-18, libstdc++6 (>= 4.4.0)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 297664
MD5sum: de2e93c8a94feb4630b4eb281f3dd7a9
SHA1: 04bfe8f53dfc1bf16c4782c39a638eef79c4da79
SHA256: 5da010d67fd50b4de94931e079a34f7a09b1ffda83be064a71cf6acaf6a25173
SHA512: 16fbed5ca8f41519a0d769e32608fa777ecef37b367854618974c9f5ad8a418a0d07e3c10a5f1afb2d84e479e64eb654e8c0baff102aeaccaf19863b59703445
Description: JavaScript engine library from WebKitGTK - command-line interpreter
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package provides jsc, a command-line JavaScript interpreter.
Homepage: https://webkitgtk.org/

Package: libjavascriptcoregtk-4.0-bin-dbgsym
Priority: optional
Section: debug
Installed-Size: 518
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-bin (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin-dbgsym_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 449624
MD5sum: e16c7336767792169d50efab04da7f62
SHA1: f6e269681166df4bdca61df690eda5f7493fc83c
SHA256: b506c3de63e4c96c8ea38dc77b67cca106561fcf4d8405a9434b9b3b28218bfd
SHA512: 167551d2a51cbdce8b6586e02bca7da5469be4034942a83394ec667f43fdc2c23ed15b859565750613727d632157db01fb5556451d74f72393cd288edecd69bd
Description: debug symbols for libjavascriptcoregtk-4.0-bin
Auto-Built-Package: debug-symbols
Build-Ids: e9529c3af72bf63e7e575dc49879ee97302c1ec2

Package: libjavascriptcoregtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 885
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), gir1.2-javascriptcoregtk-4.0 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), libglib2.0-dev
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-dev_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 244796
MD5sum: d99626a74d8e0e58ba41df54185b6dcc
SHA1: 575d011990006d74db80617890aff84980c7c93b
SHA256: 717a0e13e9f0b41058c04dc6800a3831dff31bb6e530bb38f2f8f50b30c7d300
SHA512: 9bb8b8a08659e24eac10c1770cf963fc2883a63560f2fd940df678ce991edf2fe5bb6c4ea73c9723e39e8d0f7c42f31114781f280fceeb0b0f751757d176b6fc
Description: JavaScript engine library from WebKitGTK - development files
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libnghttp2-14
Priority: optional
Section: libs
Installed-Size: 162
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/n/nghttp2/libnghttp2-14_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 69140
MD5sum: aa547a76df8d474af28a5349c89d9b5f
SHA1: a103d724ca305c412081aa1f24a273184ed49065
SHA256: b143d4e4e9ae1d0234906c7483be4c60799110128ebb7df0eb54558a6c3e7c65
SHA512: e71d137db84640b9b20789e81f5d4bf420dcdba9f449a1462509ab42bd36ffe9741b506a4530de5bbd9596b2ee6ec97b33cce283885c7d8795f000715bff58b9
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/
Multi-Arch: same

Package: libnghttp2-14-dbgsym
Priority: optional
Section: debug
Installed-Size: 240
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/libnghttp2-14-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 210252
MD5sum: cae8fac85d07f662952e3b50ee105f32
SHA1: 8579477e4e5ba59e02bb5e69c412c6f2df4fbca4
SHA256: cd93dbc7a2c590fc717ec32d12285acb247a07da7791915f103c2ba5824ddc61
SHA512: 79f2f931bb6cd52bbac8e143a4a9dce6fdbff1983bd79121cdc08b802c54548332cff52492b07186478670051b5689405294023d87e62b6e115907bce026cdb6
Description: debug symbols for libnghttp2-14
Auto-Built-Package: debug-symbols
Build-Ids: f58301761f622d433f797d60d173449786fd0d4a
Multi-Arch: same

Package: libnghttp2-dev
Priority: optional
Section: libdevel
Installed-Size: 426
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), pkg-config
Suggests: libnghttp2-doc
Conflicts: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Filename: pool/target/n/nghttp2/libnghttp2-dev_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 106036
MD5sum: 631950805ba55f07e9c59db1c9fab53e
SHA1: 74dcbd9e0b269c41d7513fd64fae6672747143df
SHA256: 70c61e9397bc3d4a019680a5123a0400e9dad128318e24a696ec478c0a222434
SHA512: 00d9821e6ab6551ec4ebaaf894d1e1c6f42ef36a3dc7703462d4bee49e4746268263ae530b892a4f5c926cc93a3737164aac56d36da9e3e23e9333cddffd04fe
Description: library implementing HTTP/2 protocol (development files)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs development files.
Homepage: https://nghttp2.org/

Package: libnghttp2-doc
Priority: optional
Section: doc
Installed-Size: 10333
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libjs-jquery, libjs-underscore, lynx | www-browser
Filename: pool/target/n/nghttp2/libnghttp2-doc_1.43.0-1+deb11u1+apertis0bv2023.0cb1_all.deb
Size: 2956896
MD5sum: 3b2b04c2ce21355a378a07fb62846bef
SHA1: 45830e16d0c82013e34514466de326f7e0b4c9c5
SHA256: 5c0d51bce0d30cda1616238f831625daecb12f5d4173e925944c86ee4335e48f
SHA512: 9f5463c6f6cd3cb59fdc0d2f78c2ee0290e2c8995ab33b80ead6befc519032f395e086cb86cc6d6b0a3e64492f3bee551e8c507a38329d4b2869d5502f6d144b
Description: library implementing HTTP/2 protocol (documentation)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs documentation.
Homepage: https://nghttp2.org/

Package: libtiff-dev
Priority: optional
Section: libdevel
Installed-Size: 887
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1), libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1), zlib1g-dev, libdeflate-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Filename: pool/target/t/tiff/libtiff-dev_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 400568
MD5sum: ec97d74c1ef9f97a402833f9c6d28945
SHA1: 3a16a60a3f0902f55ba327a08ae261b1c96b50f5
SHA256: 7cb65cc25c5657f9578b50483f95f04f10e3110286ab6de63e9b13f8cf360b7e
SHA512: 6d7397c14f0a784a0ccfbeb78c08505310744448cfa0cb46501f21e574bc30e27cd91de756c0200b7ff1693d76394babfdf0506ff09b0ff8961608d2c015c3d5
Description: Tag Image File Format library (TIFF), development files
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiff-doc
Priority: optional
Section: doc
Installed-Size: 1324
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: all
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Filename: pool/target/t/tiff/libtiff-doc_4.2.0-1+deb11u5+apertis0bv2023.0cb1_all.deb
Size: 439204
MD5sum: 3ed2761cb0fa0b68c12d509167c61d62
SHA1: 854674936041563153cfa72c72bd3b8e587c9006
SHA256: f1d79b19f14c16b81a4568ac82532d390509a5952d74b97b9bc2aaa630e801ce
SHA512: c20a960b55e3ae8ce4e46abd452268c2497c25b5be164534cf950a7e72046082534db022a2acf86863336d52040a7e93db8a5ab24dc70703284fd49b08699f64
Description: TIFF manipulation and conversion documentation
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 contains documentation.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-opengl
Priority: optional
Section: graphics
Installed-Size: 152
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: freeglut3 (>= 2.8.1), libc6 (>= 2.4), libgl1, libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiff-opengl_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 135136
MD5sum: d64e4e9f0ae580ef8c4fa8ad38d9a26d
SHA1: e877205f8b93bf421803fbfe485e74044b39fdef
SHA256: 7848fef8ccd64c510442a55e88e05a1e64c13dbdd7ca5d8cdc596fe20c0e071a
SHA512: 595ff64da09688e8c0177599a05798556eb4930d470df334a5620664f57025ce57c51e5952e42717e90eec397c805d32ee3b50feb047d7180c61dbe82e7fbd9e
Description: TIFF manipulation and conversion tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 contains libtiff tools that depend upon opengl.  It complements the
 libtiff-tools package, which contains the libtiff tools that don't
 depend upon opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-opengl-dbgsym
Priority: optional
Section: debug
Installed-Size: 30
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-opengl (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff-opengl-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 14992
MD5sum: c2af21c29415ae71e5d80347975a0b5f
SHA1: 9c107d2b5451bfb64820af6f92e4cb393924ead3
SHA256: 0c2164b080a410a33b837cfa00bcea6bc86fde35678dca0fdd794c64ac0fa1d3
SHA512: 4c904a148567df28b5324e0e16e5738757c157092338e063b63664941472c389ce06485502fd4d741f04cc7912d1a28aa338b41d73e18e270adc67d8cdb7e262
Description: debug symbols for libtiff-opengl
Auto-Built-Package: debug-symbols
Build-Ids: d4a2b37aaff265265cf22f65b1568f23c188371a

Package: libtiff-tools
Priority: optional
Section: graphics
Installed-Size: 584
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.7), libtiff5 (>= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Suggests: libtiff-opengl
Filename: pool/target/t/tiff/libtiff-tools_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 310452
MD5sum: b86f63b187cb653fd41765072cb2a59a
SHA1: e5d14767b52a355ae9f356f6177c436adcf6c629
SHA256: b1a5dbf4e7ac834535b570b7d0783d893c6f4b69234ce5db9a146b36615cf144
SHA512: 249364f92e16a708d95cd107d59977152c077f7ef286d761522d7c945dcfe3f361dc99561fcb1bc8ab28a132ef984a784296a17ae97a43c0239393fc151ec1a9
Description: TIFF manipulation and conversion tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes tools for converting TIFF images to and from other formats
 and tools for doing simple manipulations of TIFF images.  See also
 libtiff-opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 574
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-tools (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff-tools-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 420608
MD5sum: dba8336ca75d9f02b351d6569b5debf5
SHA1: d8a4800104dbbf89f5031f4b495c7d58d3643fb6
SHA256: d5cf8e75d48ed6c10bd4a1e7221920a509ebe34caf6c4e11b6bcf8f11fa31686
SHA512: 523afc792563ee2efb1fa7954a7459fcb13a23cdb17e502c1f0e9c4311cdfccc19ac073a2cefffceeede2b6b13c7f0c1d0059bdcec8348ebcfb215af9aec0997
Description: debug symbols for libtiff-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0047bd82c2bbf3efde453e7b7c2e29a4003b11de 186194a85fb402fa1114cb4dfbe4033b4ab14f55 21307701a2f928e226bc6cd6cb347e989a3d8a7f 35b219b61b6cf0617b83053cc345e9fef8b5712a 377b45446ce85d286c434461d42a1f963fdda7cb 4da792d652adc839429f2d3a724a895798a5f36f 608cd4272153397d19b311dde644b53392657731 6ca1098d62b8121c970415696e3e4e24634485b5 86463a326e7c0890b171d9ab05ae5a25b7ef461f 87f6405b9b2150938c8d882d37bf63c12142f089 983a2671e8f3424f3ee282d8406cc8b7fad9fa48 9bf8f0ed43b15761e67fedfb63fd30ad8806428f ab15640f5c793a41faf05aa8bd1996517e60a757 c95c8a97a73bc2b5f6029ca6bb80531c504f438e d626bea85de7a8ef262bfecb1323ca642ed1d785 e2831dae0158fdc6212dd73e34f74d93f3ef347d e4deeabb893ed0fed5bc9f1072e5d5cf07bedb1f ea1543ef504432699b402c6c009fb641cd4ae34c

Package: libtiff5
Priority: optional
Section: libs
Installed-Size: 541
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.29), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), libwebp6 (>= 0.5.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/t/tiff/libtiff5_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 274800
MD5sum: b33b70beb39841e19383d7956ffe783f
SHA1: 5e334fce613201758f6c567c930871798d9e5583
SHA256: e4a5a550f3e7d78a33bb78e04b71c39127fa07920a6157fdf501a2d8d47272c9
SHA512: 65c683247b2aabfe2a8284ae416a10cb2451b30f73d2eb2711e817871b727dba8d9666d14c7c2ef7f60ee5dabd4e75151c1fdd12e8bb7b5519745e2dd1a4c115
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiff5-dbgsym
Priority: optional
Section: debug
Installed-Size: 477
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff5-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 432020
MD5sum: 159b70460bc315213efd677a121219c7
SHA1: faefb94056832ff927bc9ef59c654cc17098f6c6
SHA256: fbaac1b31f8028f2e06e4e0246fbe74c25d566797ff7a52a278d64c544441b61
SHA512: 90b8c375b992d827c799f494cd8668dcb05163d21eea332b4e56a145f5b3f3f3a14ed128819dfb909c283484e17818f4fa5369127a3110e166f2c6faf7fe52cd
Description: debug symbols for libtiff5
Auto-Built-Package: debug-symbols
Build-Ids: a42bcadf7eea9bb019a9d078537bb032a1406065
Multi-Arch: same

Package: libtiff5-dev
Priority: optional
Section: oldlibs
Installed-Size: 131
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-dev (>= 4.0.10-1)
Recommends: pkg-config
Filename: pool/target/t/tiff/libtiff5-dev_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 127500
MD5sum: ea3c9f24f959e93a256863a3d27df353
SHA1: 7d4e225c7a80a5d8a83c7edac4a94df90c40a1c9
SHA256: bdfb72695ec0ab00d342dbf1896e8dbe113f87e81a03e1c4b5f812325250db24
SHA512: 6d5f1630036370fb6ee6ec628f546ce54d597f5ca45ec6dd6d1f85a2f5fc8a66f39d500f3b4bd564c1c5c5a6c087c36584785891269c54a6985c20a0c687599b
Description: Tag Image File Format library (TIFF), development files (transitional package)
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
 .
 This is a transitional package. It can safely be removed.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiffxx5
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.5), libstdc++6 (>= 5), libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiffxx5_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 130984
MD5sum: 8f8e622a03189cd26fadaaf1f399d1a5
SHA1: fcd14b5cd8c546fb3b601ff47c07a8be791e5f93
SHA256: fb417d995ddc338aa52fc2dbace922c1355eba4dce3df0b1ec5e1b85cdd6842f
SHA512: 69b78f1f85958e8732ab1daa2a0177a9213f85ca503bcd8166cef94a9917d179253599b1e86171904107c1ccc1e6d8a0cd62c94e1fea3b683589de3bbf7cfe2f
Description: Tag Image File Format (TIFF) library -- C++ interface
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiffxx5-dbgsym
Priority: optional
Section: debug
Installed-Size: 35
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiffxx5-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_armhf.deb
Size: 22240
MD5sum: 1273056b416aeb9359a3b8b0bc0398df
SHA1: 12afaaedd48bc26128ffaec58f87bf63495ca3aa
SHA256: 41577ebb3eaec3fb5d82c597553e821147d50e70b806e474926b5f788207c334
SHA512: 8ac5780424a23d9ce2bca5bb1f6e028d936a6aa59cd0d0b5c2b0b31546c944939dd05cd5a8ec2aadf6adfc29893e07a6b5f51dbc3234ea3bee4efeedfbe4accc
Description: debug symbols for libtiffxx5
Auto-Built-Package: debug-symbols
Build-Ids: 7e4424f352dd738a3f3b079842dafd6744e78a1b
Multi-Arch: same

Package: libwebkit2gtk-4.0-37
Priority: optional
Section: libs
Installed-Size: 48745
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, libgles2, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.30), libcairo2 (>= 1.15.12), libepoxy0 (>= 1.3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.8.0), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.61.2), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.16.0), libgstreamer1.0-0 (>= 1.18.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.9), libharfbuzz0b (>= 1.4.2), libhyphen0 (>= 2.7.1), libicu67 (>= 67.1-1~), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libopenjp2-7 (>= 2.2.0), libpango-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.69.90), libsqlite3-0 (>= 3.7.15), libstdc++6 (>= 9), libsystemd0, libtasn1-6 (>= 4.14), libwayland-client0 (>= 1.9.91), libwayland-server0 (>= 1.3.92), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwoff1 (>= 1.0.0), libwpe-1.0-1 (>= 1.3.0), libwpebackend-fdo-1.0-1 (>= 1.8.0), libx11-6, libxcomposite1 (>= 1:0.4.5), libxdamage1 (>= 1:1.1), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.2.2)
Recommends: gstreamer1.0-gl, libgl1-mesa-dri, xdg-desktop-portal-gtk, gstreamer1.0-libav, gstreamer1.0-plugins-bad
Suggests: gstreamer1.0-alsa
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 18194984
MD5sum: 9124d0c3ab7484ac1d0bd1c8dcaa7754
SHA1: ab4516dda5283e43f50becc03ea88d5f1ef26483
SHA256: ff437e367594a2e3051eb121c00820d16bbb84e7f22294fb931857273b7b9712
SHA512: 7963e17065aba0922b5104ed162e5dd4d3a776a1c01fedf4ed8239895389ccb8a7a28c6acf0606d8f229e381353566f0b910add2106458d65991d879018dde0e
Description: Web content engine library for GTK
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libwebkit2gtk-4.0-37-dbgsym
Priority: optional
Section: debug
Installed-Size: 142674
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37-dbgsym_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 115008484
MD5sum: 2e17ef3e364eaf5e54d4f534e9abfa6c
SHA1: cd02e18b3da4868b547a5fa8503664bcfb1fa634
SHA256: 0bc41e8079fc11339371de31fbe25ef8d40cbca0989b9d873da4e00de0d2c519
SHA512: f1feb129e52260c4d0c741be7efae9a9fe401e93da97362db6044a5c977955fd8895e85f664557ca8f5a31215c300e1380332b090c69b0be532dfa9bebe8654b
Description: debug symbols for libwebkit2gtk-4.0-37
Auto-Built-Package: debug-symbols
Build-Ids: 3e2818e984e0ce4a4bbe0df3297f3e6b2bf8c95f 8f66ff51ef3c9b605cc273e44a371b59459542d9 a7990162b2aab5ae86b84f875558ac3e69e9d7ee ca3bc35bd09b081247666b203b2cd39848f93152 e55053788e4083d3e661fd8a519d86d2a65d86ee
Multi-Arch: same

Package: libwebkit2gtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 5588
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), gir1.2-webkit2-4.0 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), libgtk-3-dev, libsoup2.4-dev, libjavascriptcoregtk-4.0-dev (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-dev_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 462296
MD5sum: 60cf1633a564c2262bbfa1a7fcaaa8a0
SHA1: 615b455663e5590f95e79a9b0b4b5c375375de03
SHA256: f0c35482b316b13a7daf05a56df0a6c1192c2db7f2ed6a5833bbdc8082ef11c1
SHA512: 5245ab17937402d3af381ba45af8b7679df05a537557f65e2b4cf51723dcca6b89b719e9ff44623868547b8d703d1fb246b934e38d2f98ed9696127da785ab0e
Description: Web content engine library for GTK - development files
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libwebkit2gtk-4.0-doc
Priority: optional
Section: doc
Installed-Size: 35471
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: all
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Suggests: devhelp
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-doc_2.42.5-1~deb11u1+apertis1bv2023.0cb1_all.deb
Size: 2175852
MD5sum: df528ce0ca50dd16caf2717b722b5b2e
SHA1: f72eb9fbbff7dd51a254d01837e44adea88c4e78
SHA256: 8efa8b94d40dfe842de33f2c04247c8feaf069b998f7d05ad2599ad38a1ae17f
SHA512: e0d8c710239d0729926733ace381007da66b3c95fb5c7f79141374e5a1751c12f2ee6713fcde4f89b5a485f7f011d581c3934ecfef2ac5b936b69a39c561f8e1
Description: Web content engine library for GTK - documentation
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package contains the documentation and is valid for versions 4.0,
 4.1 and 6.0 of the API.
Homepage: https://webkitgtk.org/
Multi-Arch: foreign

Package: nghttp2
Priority: optional
Section: httpd
Installed-Size: 34
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-client (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), nghttp2-proxy (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), nghttp2-server (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2_1.43.0-1+deb11u1+apertis0bv2023.0cb1_all.deb
Size: 17280
MD5sum: ce1e04fca9df87c3e7af2358ae6e0a37
SHA1: 09abc4f938d97e139a9a4772559edc7399d09102
SHA256: 8b5b17e550fd75b26ca9c5246d746a2e25765a54ea822fde6501976e550b8032
SHA512: f9f991167e05529ebe169a8f84824f62eb2c26bcad2e9ab27e623e0780f357cbc610654175ff5b64ad2274ce95d8cc59b27a129e48bb9bfc62ae7089fb137988
Description: server, proxy and client implementing HTTP/2
 This package will install a set of programs implementing the HTTP/2
 protocol: a standalone server (nghttp2-server), a reverse proxy
 (nghttp2-proxy) and a client (nghttp2-client). It provides no files
 on its own and is not necessary for these programs to work.
Homepage: https://nghttp2.org/

Package: nghttp2-client
Priority: optional
Section: httpd
Installed-Size: 387
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, libc6 (>= 2.28), libev4 (>= 1:4.04), libgcc-s1 (>= 3.5), libjansson4 (>= 2.0.1), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 7), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-client_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 152372
MD5sum: 3f4c53627277abb52ab1ddfaaa24c22a
SHA1: 3e0f4b9575855008c65fae90b077b6faf1bb4c18
SHA256: d1fee71df0e7a42b8285cb283adee40c90f973f495a926e73c4bcd31d56c378d
SHA512: ff251fe0bebd1c5be1003cfa72be70193b9ad17a2470545ea4b7513edf4964e74c4b75e7c843b8d5b38ca5675ae7e4233748bb3e58d14226b830daca6496b9c0
Description: client implementing HTTP/2 protocol
 This is a command line client implementing the HTTP/2 protocol. It
 gives access to many low-level and advanced aspects of the protocol
 and therefore is useful for debugging.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 1940
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-client (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-client-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 1843376
MD5sum: 1ca25bc1f8f2f0ae8a5878c7d66f0add
SHA1: 321e8433a92de34e03e4dedaaa070d57d843c4e1
SHA256: 4e5359653827cd62566b0d5a394a001542f67aa3791ad8bbf9b19c715161c32e
SHA512: 7f4a29299b9762327f590624f8198fe61c765be9bd986988da685cf1f6fabd26b3bb33e0a27d132c8c368d16882bac513bd8627daff47787841a8a43f4a52c23
Description: debug symbols for nghttp2-client
Auto-Built-Package: debug-symbols
Build-Ids: 5d8d2c3fd5778ff1edcd7d3c6f41ebbed955a233 fd8afdc251e35147fc95d9d407c7b91734d41604

Package: nghttp2-proxy
Priority: optional
Section: httpd
Installed-Size: 747
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, openssl, python3, libc-ares2 (>= 1.7.0), libc6 (>= 2.28), libev4 (>= 1:4.04), libgcc-s1 (>= 3.5), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.1), libstdc++6 (>= 7), libsystemd0, zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-proxy_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 345420
MD5sum: 00d1475f782a1c991ba0d5c8202b6d12
SHA1: 73cfa1d79aba3a35d407396385971624aa2e5304
SHA256: 37e22d2dbea8feadfc56f88a7ca60617b9679887d8be9332050edabe49beb248
SHA512: 9f3b70cfd5af35fb06dedea83e2f5f5afb537061fec2772ccbc8398b4268bacc08ba65c3d981c00c262341c732ec59718de363d9ea3b1d24a70658d7afb8b0ae
Description: reverse proxy implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 as a frontend in front of web servers that do not support HTTP/2.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-proxy-dbgsym
Priority: optional
Section: debug
Installed-Size: 5197
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-proxy (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-proxy-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 5090332
MD5sum: 28e59951cfc24d1f295faf4dbe07d87a
SHA1: 25f23ff4dc55d503bbf459a554d9dd3cc5d9b174
SHA256: ef4e1475638548e087b9ff79518adffc7f7bcd318ddf1b08c3061c0a14ec7767
SHA512: 58250b0cf13e7e29408946ff539a5af90860327d1f2412fad3f1060f3b8af4e1f26b5ec7a6928248a7b50bf75ebb5fbec0060393e3c8b30e899c0c66ae8824ae
Description: debug symbols for nghttp2-proxy
Auto-Built-Package: debug-symbols
Build-Ids: 3b61004d0559e97b2dff50a25c23a03c66ee06a9

Package: nghttp2-server
Priority: optional
Section: httpd
Installed-Size: 184
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, libc6 (>= 2.28), libev4 (>= 1:4.04), libgcc-s1 (>= 3.5), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-server_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 90848
MD5sum: 8655804007b8fe8ca326b74c95c3abfd
SHA1: 275956d319ba05805956e1b2ee29885dff4cbb8d
SHA256: 339f3412b3923473cb18be7d0442de0b32058fde6326eaa13ae6ac9382f98f46
SHA512: 5d2b83ebd9faf161e1b3b778b74ef4e604d3ceea0788d7c854ef1a0ff94c5471336927f29ecdfd4fb2e9008e99319fb6476a447132795585b8ac94e9decda42d
Description: server implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 to serve files from a local directory.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 964
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-server (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-server-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_armhf.deb
Size: 925392
MD5sum: 57e4012607baeda66e5c42b199c90b84
SHA1: d65eeb8efe20fc3e0a6879e564bb762401f4b160
SHA256: 7dfcaf65d1ca6e143534dd12e950119b71841bcc8943fd4f5e1c6bf37a538a8b
SHA512: 34b957049ed1d07ad1dbc27bbda34b2692e260537e163f78c0d87e44eecba15ab7f28bdf7e9ff473c91290a63c3b21fa9c564a694ef7c3f1539ecea49046b411
Description: debug symbols for nghttp2-server
Auto-Built-Package: debug-symbols
Build-Ids: 1867e94a6511c7ed2ba3475daec998924f6f9639

Package: openssh-client
Priority: standard
Section: net
Installed-Size: 3214
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.28), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Breaks: openssh-sk-helper
Filename: pool/target/o/openssh/openssh-client_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 847484
MD5sum: 091f16dc640da2518bdbc91af1f90674
SHA1: db4098f34ad6b41c86ce7a0e82a9f22a425ea0df
SHA256: cd4d68a453a4cbd4a15902206edc6cfdca50c73b4abab57328c42db69aa807be
SHA512: 0897be41403271b4c2f5ed675c9416923caf91d04a22c8064fef18f7ddf45f103fa238c10f56c2be9a26c0903066e2769f402d235711165af581be0eea286c3d
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 4228
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-client-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 3822400
MD5sum: ae01deecdd446d6c480790ada2917ed9
SHA1: 247759323bfd18e00bc4949deb7f99be90642b39
SHA256: ffa3ede1f937433638cf05dcc796624b53e8502235a03fba19203ecb9dc30e50
SHA512: e1008663f50657975e8055ff9dd7a7f39e757acf8d652318dd8efe013e15e3b49686d3e9bb7f7b2e1e0997f588ec8a26543f799695fd14ecc8c6aa0897ee09d5
Description: debug symbols for openssh-client
Auto-Built-Package: debug-symbols
Build-Ids: 0ecac9ed6e4c6edc7658369e28fd7598df5b6a8e 117374e0524e70bf582e1e748b5b36b8316013b6 1867cfe780411641a74c7a867ef1860e4b802bf2 409c10612d849518c6b54554578c4b9026e590db 5f4c0e2b7fabe7f6ee6dda395e86e4cd3a84d4de 60f7c930f0bf9c9bbb4c85c4228ce879105f19eb 8aa2588966ae3303facac8ebbb46653c861ee725 a900f66ece9a88617643f31ee7b10dac81813366 ef41ab64f0ccb099f2b15dc5c580e89053fd768c ef807a3e9cd1c543702f4a1038df44a6e8cec733

Package: openssh-server
Priority: optional
Section: net
Installed-Size: 1296
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.28), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), libsystemd0, zlib1g (>= 1:1.1.4)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Filename: pool/target/o/openssh/openssh-server_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 349024
MD5sum: 7bbfeeac0e38ccac8b853d58b90230a8
SHA1: a963fa181a211be870f899803e6640259c921cb9
SHA256: aeb4e66b92f8b4a1b87a5ff26f5ce4fbf1d5db912e2fd1e79b851a2b81558ccc
SHA512: 2a024c0be02f56b146d6d81bb2da074f7770ae86969f5716572a4d6476da76c1ad5c7a940f95b11b2db468b49b9b3fc380dd7f3fa03b91af063c3e376b8b923f
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 1108
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 1020624
MD5sum: 1b781b21dbbd0816da64ea137392ee34
SHA1: a0064568a22356c36d909a7fbaf0bf688f8269dd
SHA256: f8c371d806439278ee391c62fafe63600effd6f3cd2b6c0d35f1b244c0d48d4a
SHA512: e07a7b5ae946180c429e92cf5d3fe15ed6140e39aae9be6cf5438504177ca49ccf8067db2fbd9d9721590a5880863b4a46e33654d453ddb6e774d7011398372b
Description: debug symbols for openssh-server
Auto-Built-Package: debug-symbols
Build-Ids: a5fdd0074d66444845bb20d8123c21e73aeaafe1

Package: openssh-sftp-server
Priority: optional
Section: net
Installed-Size: 96
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), libc6 (>= 2.28), libssl1.1 (>= 1.1.0)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Filename: pool/target/o/openssh/openssh-sftp-server_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 46216
MD5sum: f8938f1feffc465d81e0bd52f06858bd
SHA1: 284961ef9a258e6ae820b71f9423b8b23998e5c4
SHA256: cd37d46285c209e25ebfd4dce7a585ccbae85f5c86698a73e80c0e9b97764cd3
SHA512: 010833de55be41409844c75ca2927229278edd5972417542682ab9b9855ba337c6356e0389ddeb69d51a7862f3bff49d2cf22a07aed3a042a1d3186a1af5b267
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Enhances: openssh-server, ssh-server
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-sftp-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 188
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-sftp-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 160436
MD5sum: 5c68fb6c947ced80651e9ae8cca7c7a7
SHA1: 7699cd57e9f3e7eae0ce632cdc10145cce2a6807
SHA256: 70cdad99326c2bdc3b855a9f7719d2d4c418dfd5ed75790a2b6993b38ac046c1
SHA512: 1446d8fdcf273507e67214282509736b9f3034466ebe1bcf415af1c96cad9da864873068638b5b917dc421956d9e314a1ea6dafaa193a6b96565b3ccffd3c809
Description: debug symbols for openssh-sftp-server
Auto-Built-Package: debug-symbols
Build-Ids: 6f8faed9c324fa118a0366baaae0c5dec7775659

Package: openssh-tests
Priority: optional
Section: net
Installed-Size: 4017
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssl, putty-tools (>= 0.67-2), python3-twisted, libc6 (>= 2.28), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/o/openssh/openssh-tests_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 884868
MD5sum: 762fa5049ff7faa7cd8d8bd4f8817c52
SHA1: aec59dc0fad698050071dfa2215bbc1179a2ef3a
SHA256: b85c6b4f498ca336c7a5123f4dd7e98850d79bb2cd5512254d37b85db06087e8
SHA512: c338d8fac41ee271c169ae46b3c8fb878bee357c3f8b63ed5ebadc3e78df279021c2ec0d2dedccb2e6d0e21f8329ae6b10a471ec3f31afaa5f78c77ae1a680be
Description: OpenSSH regression tests
 This package provides OpenSSH's regression test suite.  It is mainly
 intended for use with the autopkgtest system, though can also be run
 directly using /usr/lib/openssh/regress/run-tests.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-tests-dbgsym
Priority: optional
Section: debug
Installed-Size: 3002
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-tests (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-tests-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 2622940
MD5sum: 48e489af672f4d472df681f70e7be2ba
SHA1: 040508a15ee4b7956dea98d7b8f8b3fab303bada
SHA256: eb8234b6e80c52d78c0b25bf9f3bb1d89f89e1944e0f7bb5977c185c4a85b66d
SHA512: 6c557b0acb17d47003f010fd3f86fc565af36e232cb2efd3242c5911d6f90c8fa3edf8e31fd683f18fbfa36c3ed740884954caf162d0bf2eb89bd7fd591b43d7
Description: debug symbols for openssh-tests
Auto-Built-Package: debug-symbols
Build-Ids: 0a9b1edc3c77b8781e1237e1b54d2ec75babcda5 1c405493908d3ad1fcdbe5e7be48df309265b17f 27425c2235cfb460aec4cde1d64ac811688da0dc 43b08d5063f5423497c0ec1f091a11ba20a7b3cf 4de909c60fa77fd0fa21d2596742e7ca91ab6cee 5225a718b4acddfe928fd320f56167e105c85c97 6e5ce5d7cc95033228567536df65f6dbe504f420 767d850f87c9f2b8317319e38b9ded52d5b2ee20 83063a82211b91efe16472f5cf5ff80400326e86 87cb9dc520fc5fb4472a75d96d7cd9708fd01278 a7ae48e828a9a94502e2f0f93ce3058e3f9cafca adce5920346fea96be3f334dbacbabc44e07649a becc6862b1214982dffd337684e56e7e40f84518 dd04d13ac25f65465ffe5ba4445e4bf8e1bf9014 e452fc2e7f99bb7898c3bc688cdc37f57833fa4f edcb6ceb34fb34efee9d72e3cf0393d368a2cea5

Package: runc
Priority: optional
Section: admin
Installed-Size: 6831
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: armhf
Version: 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1
Depends: libc6 (>= 2.28), libseccomp2 (>= 2.4.1)
Recommends: criu
Breaks: docker.io (<= 1.13.1~ds1-2)
Filename: pool/target/r/runc/runc_1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1_armhf.deb
Size: 2092340
MD5sum: 9d9c70114a5297363b3596ea10ce1609
SHA1: 8273f1d06b6db377206022779c70dc259931527c
SHA256: 7ec011c5ff82c6d22afa5125b1ed3e86f6352c8ddc9009f84c882b1196baa9a1
SHA512: 5fac54d72de7eaca094dfa2c449fb4890255c1c765ad58edbd7e3d5f7f11da3203cc99d66db510063d57d9b2ec90b293b8a7c465d559ca43ad2bdeab64525367
Description: Open Container Project - runtime
 "runc" is a command line client for running applications packaged according
 to the Open Container Format (OCF) and is a compliant implementation of
 the Open Container Project specification.
Built-Using: go-md2man-v2 (= 2.0.0+ds-5apertis0bv2023dev2b3), golang-1.15 (= 1.15.15-1~deb11u4+apertis0bv2023dev3b4), golang-blackfriday-v2 (= 2.0.1-3apertis0bv2023dev2b4), golang-dbus (= 5.0.3-2apertis0bv2023dev2b4), golang-github-checkpoint-restore-go-criu (= 4.1.0-3apertis0bv2023dev2b3), golang-github-cilium-ebpf (= 0.2.0-1apertis0bv2023dev2b3), golang-github-containerd-console (= 1.0.1-2+apertis0bv2023dev2b3), golang-github-coreos-go-systemd (= 22.1.0-3apertis0bv2023dev2b3), golang-github-cyphar-filepath-securejoin (= 0.2.2-2apertis0bv2023dev2b3), golang-github-docker-go-units (= 0.4.0-3apertis0bv2023dev2b3), golang-github-moby-sys (= 0.0~git20201113.5a29239-1apertis0bv2023dev2b3), golang-github-mrunalp-fileutils (= 0.5.0-1apertis0bv2023dev2b3), golang-github-opencontainers-selinux (= 1.8.0-1apertis0bv2023dev2b3), golang-github-opencontainers-specs (= 1.0.2.41.g7413a7f-1+deb11u1+apertis0bv2023dev2b1), golang-github-pkg-errors (= 0.9.1-1apertis0bv2023dev2b3), golang-github-shurcool-sanitized-anchor-name (= 1.0.0-1apertis0bv2023dev2b3), golang-github-vishvananda-netlink (= 1.1.0-2apertis0bv2023dev2b3), golang-github-vishvananda-netns (= 0.0~git20200728.db3c7e5-1apertis0bv2023dev2b3), golang-github-willf-bitset (= 1.1.11-1apertis0bv2023dev2b3), golang-gocapability-dev (= 0.0+git20200815.42c35b4-1apertis0bv2023dev2b3), golang-golang-x-sys (= 0.0~git20210124.22da62e-1apertis0bv2023dev2b3), golang-goprotobuf (= 1.3.4-2apertis0bv2023dev2b3), golang-logrus (= 1.7.0-2apertis0bv2023dev2b3)
Homepage: https://github.com/opencontainers/runc

Package: runc-dbgsym
Priority: optional
Section: debug
Installed-Size: 2957
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: armhf
Source: runc
Version: 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1
Depends: runc (= 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1)
Filename: pool/target/r/runc/runc-dbgsym_1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1_armhf.deb
Size: 2306012
MD5sum: 799340ba36837a8783f6a50216d9eace
SHA1: daabeab627da33924a39b8188ec54947933e1674
SHA256: 425cda41aa89bc6fb56985195d3dcc3607687cb0572f98f1fdbfe1d3c2c41e64
SHA512: d420857d902db5d4521de0a65a4eb42d6daf2ce3102bbf29b8da5f1c6d032b973abbf5ad3f88f2c7a5571ab072f2bb3d00a57dc3df7df9914481fd03d8cae930
Description: debug symbols for runc
Auto-Built-Package: debug-symbols
Build-Ids: 3f5d83c7c25a38f2a4e381aecd9495ba16a710c6

Package: ssh
Priority: optional
Section: net
Installed-Size: 270
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (>= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-server (>= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Pre-Depends: dpkg (>= 1.17.5)
Filename: pool/target/o/openssh/ssh_8.4p1-5+deb11u3+apertis1bv2023.0cb1_all.deb
Size: 259448
MD5sum: eac6ed65b4214e84a6a8ceb62a30f378
SHA1: 998a5235ce3c9e7046f36a977ec7952114e673bb
SHA256: 3bbbca7ee560cc04b016ca839fb188ea1cad689e7d0f40638faa654bcf7df9af
SHA512: e575e1c2f07d73fb2d626eb76a5d52543168264b0a034e45ab9b5e5f023bf5ee14d8400bdde83c8547532fe363db2e968100b6de84bbe9f81b5583e8c7b5702e
Description: secure shell client and server (metapackage)
 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: ssh-askpass-gnome
Priority: optional
Section: gnome
Installed-Size: 295
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: ssh (<< 1:3.5p1-3)
Provides: ssh-askpass
Depends: openssh-client | ssh (>= 1:1.2pre7-4), libc6 (>= 2.4), libglib2.0-0 (>= 2.12.0), libgtk-3-0 (>= 3.0.0), libx11-6
Filename: pool/target/o/openssh/ssh-askpass-gnome_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 272308
MD5sum: 385490bccdd83c40e8c5bfedc4e96d71
SHA1: 0c4c677a2f936f3a632509e6f36d279dce12b5e8
SHA256: 748b254c256affbf8bbca24534be1a6f26d4fbcfb6e02e633e95353092aadba6
SHA512: 4555d5d14c20b86526cdd6803be89636f29b9c9937c6b96ede1d3ba6c5930a523e9f52002d4cd24451682337c047b4cd0988b764ddfba56e33f3f0bb1029b2f9
Description: interactive X program to prompt users for a passphrase for ssh-add
 This has been split out of the main openssh-client package so that
 openssh-client does not need to depend on GTK+.
 .
 You probably want the ssh-askpass package instead, but this is
 provided to add to your choice and/or confusion.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: ssh-askpass-gnome-dbgsym
Priority: optional
Section: debug
Installed-Size: 27
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: ssh-askpass-gnome (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/ssh-askpass-gnome-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_armhf.deb
Size: 13036
MD5sum: df8325bbd5acc292894be05f37395a46
SHA1: b22ed22b1bdc947c0d01394de257ebc1bcdc5063
SHA256: fcdcb8f62f2be35df16d6fa34aa74fa1980d17e2895da34a2fda20be4b180bc4
SHA512: 3900a16353b63166463cf7ee97a8d9bd0c1aef112bd8beb7b6abd2d329311ef446032881ab688b6acaa1d479cdfa9937934821622b742ac700341b9f6e27e945
Description: debug symbols for ssh-askpass-gnome
Auto-Built-Package: debug-symbols
Build-Ids: 17b49fb7881dc6416e741a68443294618c5e33ec

Package: webkit2gtk-driver
Priority: optional
Section: web
Installed-Size: 1205
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1), libc6 (>= 2.30), libgcc-s1 (>= 3.5), libglib2.0-0 (>= 2.39.90), libicu67 (>= 67.1-1~), libsoup2.4-1 (>= 2.47.4), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 566700
MD5sum: 9a75967f542b3ac5af6758356995e1df
SHA1: 015c0bf23e3f39607a13d7ffa45ae4f31ea6467f
SHA256: 25eb8d41c2bd250d3315db5f7aace1f9149fcefbfd1ac15a5dcd7e37dfb0198e
SHA512: 69dda3a091806a1283aa69f6d1ce39c545152d91da5b447786154ab52980e5f21a1c12d6bc0a0c6c447e72c3c66389d70743153a5f87030c202fea7d5a5a6881
Description: WebKitGTK WebDriver support
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package provides the WebDriver service implementation for
 WebKitGTK.
Homepage: https://webkitgtk.org/

Package: webkit2gtk-driver-dbgsym
Priority: optional
Section: debug
Installed-Size: 2034
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.5-1~deb11u1+apertis1bv2023.0cb1
Depends: webkit2gtk-driver (= 2.42.5-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver-dbgsym_2.42.5-1~deb11u1+apertis1bv2023.0cb1_armhf.deb
Size: 1622812
MD5sum: a9b3a405b0e1550f0d68dacaee6b6a78
SHA1: 3b5012b10de5913767faf2cfbcb3415fbcd04209
SHA256: e7502d76440ceb4ed2766e5b579d4123381db85e77fce2ff110cc55ee4af29d5
SHA512: 9aee8c770d55e51c6796df8014e657b91fa1cebfd2c9d6163707a8b0cdf52bbbe1c9fb2c9555d68135fa6cd09584dece3346b53073c5fc3d4d717617abcac2ae
Description: debug symbols for webkit2gtk-driver
Auto-Built-Package: debug-symbols
Build-Ids: a6eafe228e714c9ac9360c19c5691a4c6c783c05

Package: xdmx
Priority: optional
Section: x11
Installed-Size: 3415
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfixes3, libxfont2 (>= 1:2.0.1), libxi6, libxmuu1, libxrender1
Filename: pool/target/x/xorg-server/xdmx_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2888796
MD5sum: 7ca96bb278188dbe6b89ef527b358c1d
SHA1: e29a23dc642f3f72fa9e20cf13eb8f11a0511b3f
SHA256: 604b4f142bcd0b0bea4a297fe2018f87d8e17c4d1412be8f8b59446208200556
SHA512: 65db98ef7440b03f52038376fb920ef9a8acfe4988f5cb7e564747b32493ea6ad7c232e8162516e13e90ecd9ed0c8a2cdff8eb0064657b3a456f6a5d6029fc62
Description: distributed multihead X server
 Xdmx is a proxy X server that uses one or more other X servers as its
 display device(s). It provides multi-head X functionality for displays that
 might be located on different machines. Xdmx functions as a front-end X server
 that acts as a proxy to a set of back-end X servers. All of the visible
 rendering is passed to the back-end X servers. Clients connect to the Xdmx
 front-end, and everything appears as it would in a regular multi-head
 configuration. If Xinerama is enabled (e.g., with +xinerama on the command
 line), the clients see a single large screen.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xdmx-dbgsym
Priority: optional
Section: debug
Installed-Size: 3047
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xdmx (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xdmx-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2869144
MD5sum: 0a97db20484ba1fa201affaa3bf3b624
SHA1: 6f77717bcda50e3cad9cbb1cc0c07eb01b7ecb93
SHA256: 1455ff584c9393612d53c1f114b33470034e4bddd795d866d9acb0289ac76a44
SHA512: 37b05764e395ecd0595bac41b8f226717f97f819fd2983ce6854b0d2cf9068f6f038d4fb7a5347abc4e4ac5cf0ab654e1fe079b6c56afbb0e310e13c0a175da2
Description: debug symbols for xdmx
Auto-Built-Package: debug-symbols
Build-Ids: 8e979874b7bbe9544fe70fa3f7b42fd54575ec59

Package: xdmx-tools
Priority: optional
Section: x11
Installed-Size: 2471
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xdmx, libc6 (>= 2.4), libdmx1 (>= 1:1.1.4), libx11-6, libxaw7, libxt6
Filename: pool/target/x/xorg-server/xdmx-tools_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2320360
MD5sum: 151d7e6ce55eb90d05c82ac422fa08d5
SHA1: 94b2fb584842a2d635e1800ba76824a74a37af34
SHA256: c3513fee7407895407b34774a73e5141a346c7f2d52f271caa6b8907c150ed6a
SHA512: 6287a6414919b7650a55b96a00cd675a06c65fa5c416ebff96a840e11cdee6aaf15aec9bc5bbfb121c67f876048cfc9abb19fcbaea106479422561d40305c6b1
Description: Distributed Multihead X tools
 This package provides a collection of tools used for administration of
 the Xdmx server; see the xdmx package for more information.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xdmx-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 293
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xdmx-tools (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xdmx-tools-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 196932
MD5sum: 932e1fa600c01efd6b48d2b2331dc316
SHA1: f8fc2b0a638b869d71dcb015c9ba9d93fb86851a
SHA256: 00b30f427f5670d6f8841ba6610c930e6b47a5f83fc4fbe02df8c3851697ade1
SHA512: deeb7f7d8a4fb0f7e2b9d22bd5e1c25e24939d303c3f6190de1d03be77ff142de26ddcd97a08b1cbd9689ea58d73ade988ab3de0a48e30c098950db18130e3ce
Description: debug symbols for xdmx-tools
Auto-Built-Package: debug-symbols
Build-Ids: 1d43bb31a5f427f85a44998e5c77e53eaf27b2af 3fcfdd3e75baac48ea4e21b2415d63c37f8492c8 4cf9ac77bae5fa09d75dcb77f59bab661f8663e7 50f4a91965416f188597a73f189cea93a324be32 733b5d77f6346522b964d0a2c5cba79a49cd88ea 9aedcc5dc79da264d20262c51485a8c214023b08 a65213a1316f5549390ac62a05ab4b5375e6700c b6a9bf2abb29d80e08b781dd8c308facf8924142 d9550f399bf7fed0eb85ef639789c32851c54ec3 da07affad43e2f6ccce482f0bc4b59918566e775 e2074acc84d41a7a04705b0d76a4d2f15aec0656

Package: xnest
Priority: optional
Section: x11
Installed-Size: 3301
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.13.2), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfont2 (>= 1:2.0.1)
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xnest_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2822128
MD5sum: bc1ed4c84a35b5caf895058906e8b979
SHA1: bf8b5d8bfcde972ff9e38f7f6449b00f2ff454d4
SHA256: bc959697030f49ce3ce983cb8ecd17de133e38c9d09a0ca808d29237a7a2421b
SHA512: 20230193172992d988ecd494162c116e6ff9717008c3ffc49a056578428e6ab0ef4faa99c2258ace2a39101dc71270e9c2cfe51b8ab35a67fd5cbd7f6ad25d98
Description: Nested X server
 Xnest is a nested X server that simply relays all its requests to another
 X server, where it runs as a client.  This means that it appears as another
 window in your current X session.  Xnest relies upon its parent X server
 for font services.
 .
 Use of the Xephyr X server instead of Xnest is recommended.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xnest-dbgsym
Priority: optional
Section: debug
Installed-Size: 2768
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xnest (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xnest-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2593764
MD5sum: a399303eea34435f2e9a076171de1082
SHA1: 96a24282cc8419a3779791af2bec2fefaf879a2a
SHA256: 2027ac923835f8d5196a31f748b090efa3dcf2d606b1276b7b1c09794b7b604c
SHA512: 5c018ada55c97f948b41a1aaa539a29b98f064fa93ca2d86f79a7c990b6bb0c0215fd1b242bd51a35942bdde7856b6e246c7778a34b4c839250a10b6440cac2b
Description: debug symbols for xnest
Auto-Built-Package: debug-symbols
Build-Ids: 6897429e290736bf1644afd5718c48ef1b48eb05

Package: xorg-server-source
Priority: optional
Section: x11
Installed-Size: 7411
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Filename: pool/target/x/xorg-server/xorg-server-source_1.20.11-1+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 7497536
MD5sum: abb65e5da2c6b0c14970a73f57a4be70
SHA1: a294c2829410f87ad74972c2bb261c9503f3aed8
SHA256: c0739191869f7d57b9b7d9b259c07d4df28737e3a570ba16d8ef8666135c7812
SHA512: c304b5f210616220b321cbf238b28ab216ebdec065d5a23f9a1ff583fd3de2adc757914b6856b48fb43c2297a115f6561a622b9e5c335e25d6ac2adadb13da30
Description: Xorg X server - source files
 This package provides original Debian (with Debian patches already
 applied, and autotools files updated) sources for the X.Org ('Xorg')
 X server shipped in a tarball.  This enables other projects re-using
 X server codebase (e.g. VNC servers) to (re-)use officially
 Debian-supported version of the X xserver for their builds.
 .
 Unless you are building a software product using X server sources,
 you probably want xserver-xorg and/or xserver-xorg-core instead.
Homepage: https://www.x.org/

Package: xserver-common
Priority: optional
Section: x11
Installed-Size: 2359
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Replaces: xserver-xorg-core (<< 2:1.5.2)
Depends: x11-common, xkb-data, x11-xkb-utils
Recommends: xfonts-base, xauth
Filename: pool/target/x/xorg-server/xserver-common_1.20.11-1+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 2296504
MD5sum: 27728e1592db78d342a9e1e57016ec9f
SHA1: bcc84baa1d1f0ccd887a52115b7839c5bb63e170
SHA256: 3ae91a35e84a7eb1d3eae70b78ec4e584e15d2635a0f9cc1d33f457d12215c6a
SHA512: 4682762bb420295523e5f22484e68b68d8a56854a1181d0f2f5c1b8fdb9061a1f0998a4e309f21ecc14c1463d0ff1fffcdd9d57c518f7abecd88e7d3ce8c4906
Description: common files used by various X servers
 This package provides files necessary for all X.Org based X servers.
Homepage: https://www.x.org/
Multi-Arch: foreign

Package: xserver-xephyr
Priority: optional
Section: x11
Installed-Size: 3617
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libepoxy0 (>= 1.0), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxau6 (>= 1:1.0.9), libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.1), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-util1 (>= 0.4.0), libxcb-xkb1, libxcb-xv0 (>= 1.2), libxcb1 (>= 1.8), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xserver-xephyr_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2990872
MD5sum: 2ec6278af25cf0b89abd4f466ee4c7f0
SHA1: fe14a0f68c678b10bb3ddd87c3453b033de4a1bc
SHA256: afdf13571f1f997792f3591cfe17b52986a9792e84d9f8efe49ff0c76a4203d6
SHA512: e513c082123e55304d982631aa06e80ebe326e84cdeced739ec8aad9438c147097e8337937dca0faee6da0e51617b9e95839ad80183dc854c5b63b66f3214e2c
Description: nested X server
 Xephyr is an X server that can be run inside another X server,
 much like Xnest. It is based on the kdrive X server, and as a
 result it supports newer extensions than Xnest, including render and
 composite.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xephyr-dbgsym
Priority: optional
Section: debug
Installed-Size: 3634
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-xephyr (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xephyr-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 3426540
MD5sum: 0fddb65d8b41ad124c9b9142675e8284
SHA1: d22ad4a71d79ee7da2cacb889b79142689ab7795
SHA256: 26d36e9c2bc18e71a7a9d3abb977f3a4aa076f3eae217ddfe8db32053f1e8650
SHA512: 34183baedfa6b58d9d0860468e5c7683eedfbbb5f91e6921f724fb6d04afab81a96aa0677ecec0f8914728c9512a7c2c8db794f78f672a897433f394a2a75fba
Description: debug symbols for xserver-xephyr
Auto-Built-Package: debug-symbols
Build-Ids: 81cd374d0b0788aacd2cba7ed21b3ccb52bab26b

Package: xserver-xorg-core
Priority: optional
Section: x11
Installed-Size: 4477
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Replaces: xserver-xorg (<< 1:7.7+10~), xserver-xorg-video-modesetting
Provides: xorg-input-abi-24, xorg-video-abi-24, xserver-xorg-video-modesetting
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), keyboard-configuration, udev (>= 149), libegl1, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.4.66), libepoxy0 (>= 1.5.4), libgbm1 (>= 17.1.0~rc2), libgcrypt20 (>= 1.8.0), libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.10.2-4), default-logind | logind
Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable
Conflicts: xserver-xorg-input-evtouch, xserver-xorg-video-modesetting
Breaks: libgl1-mesa-dri (<< 18.0.5), systemd (<< 226-4~), xserver-xorg (<< 1:7.7+10~)
Filename: pool/target/x/xorg-server/xserver-xorg-core_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 3339924
MD5sum: 5c8d62e576e554d21efa77e5e791a3c3
SHA1: e79c6557de8e6a4740d45156da71d6d876d4b978
SHA256: f295bbd5447aa33ed3c36808570d0dd6fb25741fe15f03b5a725f8ba75699d49
SHA512: 0769b62ea97c0ddddb27be62466f8f00dd9bfcc8a88e1f010ed38d2c7ebb74d94af840e43be20f5726eda3346c8311a52712ed87490d9e5fdf9a9a034376ae97
Description: Xorg X server - core server
 The Xorg X server is an X server for several architectures and operating
 systems, which is derived from the XFree86 4.x series of X servers.
 .
 The Xorg server supports most modern graphics hardware from most vendors,
 and supersedes all XFree86 X servers.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xorg-core-dbgsym
Priority: optional
Section: debug
Installed-Size: 5488
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-xorg-core (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-core-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 5096932
MD5sum: b1b9b1d4cf3afa320a1325ff12ce8523
SHA1: f9eb34cd6a2bd58d3494ff4d7ead8cba5cbc0a6b
SHA256: 29098e4f8840b4644131b9cdd10bcc2d247fc062e1fd013374ee91b0ccfe87b3
SHA512: ea36f77c4f7ac29e9fbf682c859c43f9a59647d8dbe6d14525c8ea29669b30d05c349388d1d391cf531052cadcdce7f9808302c35aa18c517e24e0214c9a5a24
Description: debug symbols for xserver-xorg-core
Auto-Built-Package: debug-symbols
Build-Ids: 0d0245ff38120ebb3c91e08bb801e5501931c8b0 285b5a86f3355a72834d0e9d837f80618c9d7ca2 376d9d2f65a96e443d683ebd4837a01bcea7c09b 3e2101ddcde0341adf3dde5148fad7d1925192df 58af34a0244547365576844e34d678cc718f2271 5bf562ff165fdd3a7f3ff583cba83ec188316329 6332670b61cc286307561dc169913da1d0725f91 76dfccf8b365e01f3ea520907c952940596c861c 82b579157c8f643d67151c729bfc64a57f3afe78 845bd86f27b8300d0dd3d6c0da386a0641a93073 8e4f765c144e7105bbd9a0423db0a237726fc43f bc64a2bc7189aa5c436faf2c71d024ebdfd25750 d99312f68e8186c67edb02df84f6c3e7f62ecf5a ef2dd1a6ae4e06b0dbecb1d4ba393429e64d4889

Package: xserver-xorg-dev
Priority: optional
Section: x11
Installed-Size: 3556
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: libpixman-1-dev (>= 0.27.2), x11proto-dev (>= 2018.4), libxfont-dev, libxkbfile-dev, libpciaccess-dev, mesa-common-dev
Filename: pool/target/x/xorg-server/xserver-xorg-dev_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2470004
MD5sum: cb526e6081daf82e0d80ad48e4887e46
SHA1: 1b4ba3994a068889580ba47a4646bcbd7b2c054b
SHA256: 8697259c3eaab8bb6b8fc3a197788f6339934240a7eb9b7b192a716d928bfab5
SHA512: c54924ccb887f6b5e742f91d9d3577897fc80549d728513f615895fa4d9009c9ab6acbc42b78aef1efacd0d86f1f4776c672abfd4927545a34c32aec0cb04b03
Description: Xorg X server - development files
 This package provides development files for the X.Org ('Xorg') X server.
 This is not quite the same as the DDK (Driver Development Kit) from the
 XFree86 4.x and X.Org 6.7, 6.8 and 6.9 series of servers; it provides
 headers and a pkg-config file for drivers using autotools to build
 against.
 .
 Unless you are developing or building a driver, you probably want
 xserver-xorg and/or xserver-xorg-core instead.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xorg-legacy
Priority: optional
Section: x11
Installed-Size: 2386
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Replaces: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libc6 (>= 2.4), debconf (>= 0.5) | debconf-2.0
Breaks: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2301912
MD5sum: 196d9f3fe30970328f5c68e31ac3e715
SHA1: f9d97d5dc29673638035d104986a287a59a80e30
SHA256: 64e2642e933dfbbf48eeaf5c3eb29c58ab98da1c0394f11797bd170cf0399469
SHA512: 1d76e7e81324bcd538eff339f0eaa7e9c6262fd2abeda436f44188cd53ba6eefc1cc9364b06061355bca2da1306fa91acb6a304f83c787564e1045f59948b9ec
Description: setuid root Xorg server wrapper
 This package provides a wrapper for the Xorg X server, which is
 necessary for legacy drivers and non-Linux kernels.
Homepage: https://www.x.org/

Package: xserver-xorg-legacy-dbgsym
Priority: optional
Section: debug
Installed-Size: 23
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-xorg-legacy (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 9644
MD5sum: 1f75d69c7047867f8593f444ef4de9fd
SHA1: bede8f32429a66ca4b8e63bdb2ab7f7cc3f3912c
SHA256: f22c533208ec4be4a48056c524b6861510571a037e67263a20cbe2b60bb95415
SHA512: 61f865ce4256e39315ad5364a1eaa30e387dca2e3e7cf14bc14dc2ce8669fa8ae9a66b72fff8579222d1148215fbdb460e083f3fa4bf5ae9b3aa35eccb10e033
Description: debug symbols for xserver-xorg-legacy
Auto-Built-Package: debug-symbols
Build-Ids: 09a4d38af829eb856ce96ff7332bf858858e72ac

Package: xvfb
Priority: optional
Section: x11
Installed-Size: 3393
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1)
Recommends: xauth
Filename: pool/target/x/xorg-server/xvfb_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2877580
MD5sum: ed2905665f66211aadb927fee9250204
SHA1: 976081fcad0fd816d822ee267f0a23421ee6fd39
SHA256: d8d498473c07192e084b0d59cb65689ecb06e3f125c3599c30b6acba91e3e24e
SHA512: 4393bc1fcc051c9da25650a982813adc7fa506f9a36634d58fc24003bf263fce1e569e73aaf1b2e9e782ace45c96867013fee8974dcaae2cd8c72d935dc75a8a
Description: Virtual Framebuffer 'fake' X server
 Xvfb provides an X server that can run on machines with no display hardware
 and no physical input devices. It emulates a dumb framebuffer using virtual
 memory. The primary use of this server was intended to be server testing,
 but other novel uses for it have been found, including testing clients
 against unusual depths and screen configurations, doing batch processing with
 Xvfb as a background rendering engine, load testing, as an aid to porting the
 X server to a new platform, and providing an unobtrusive way to run
 applications that don't really need an X server but insist on having one
 anyway.
 .
 This package also contains a convenience script called xvfb-run which
 simplifies the automated execution of X clients in a virtual server
 environment. This convenience script requires the use of the xauth
 program.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Multi-Arch: foreign

Package: xvfb-dbgsym
Priority: optional
Section: debug
Installed-Size: 2955
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xvfb (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xvfb-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2789192
MD5sum: e6a7b140aea823846a220aa2aaa702af
SHA1: 84f269465899974c2089e7c6a0fd73b955676d86
SHA256: 0e11cde8302d40a6fbedb7c054e2a7362da935795dccb623cf7b0f93effb43ac
SHA512: 48340a16aec3fb5872d5efef6d23853e7e9b050178024a476396d50e0fe917bd42ae3ff8a64ae98bd488b1d4a216589a147a4a61284b30e1c8703e8c25570b64
Description: debug symbols for xvfb
Auto-Built-Package: debug-symbols
Build-Ids: bf7b7491acafc7e635b8d0ebd475829f999e9a12

Package: xwayland
Priority: optional
Section: x11
Installed-Size: 3408
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libwayland-client0 (>= 1.9.91), libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Filename: pool/target/x/xorg-server/xwayland_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2884500
MD5sum: f47ee2e2f0166d133ff2894eaee6f5f7
SHA1: bfb92c8322ead8489abd9841bee60515211fef2e
SHA256: 4f5e13daec7a3b1f9b803e3aa2392debf2bcab41890b3d5cf6ee28f525aa8ed2
SHA512: 391ced7fa5a0b75936f4239ce181587681f295d79fbddaf756c5243880570bff033cae3f1c060d32b31a0a811b83255c3837f5853ac5abcb420dc4bcd998233c
Description: Xwayland X server
 This package provides an X server running on top of wayland, using wayland
 input devices for input and forwarding either the root window or individual
 top-level windows as wayland surfaces.
Homepage: https://www.x.org/

Package: xwayland-dbgsym
Priority: optional
Section: debug
Installed-Size: 3100
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xwayland (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xwayland-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_armhf.deb
Size: 2921716
MD5sum: 7d9f100ed19352290374d68adfa35975
SHA1: 176ad467d37375b92913e8e7ee8a32871c314c17
SHA256: 3a1017654e22ddcfd198efc73587cdabaa343676b12fa038c24c85aa3bdfc3e7
SHA512: f733e448f0ea7e47aa7eb5d8dcae91d253cf7e2636e675d7ff220b648c1c4cafb944cf7f816a7bbf21d32f2ce5a93df7a89e870447456294c47ef91876208d37
Description: debug symbols for xwayland
Auto-Built-Package: debug-symbols
Build-Ids: 0982e6fbf6d035aa17d0b9db55975530750af798