Package: bluetooth
Priority: optional
Section: admin
Installed-Size: 76
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez
Suggests: bluez-cups, bluez-obexd, bluez-meshd
Filename: pool/target/b/bluez/bluetooth_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 50204
MD5sum: 899d4622cff71a98b2b5a47ec89a4c71
SHA1: 15a3ca01987070790237dcc1aff3f47ef2f1e054
SHA256: 7f3658a8c3c11231b58c0c855dd5aa10b1602681885f86a4730fe0e2d15410e8
SHA512: 46cb2ec035b62cdc7996f547b67c89e49d828f57c7e3a55062256b83e257fb2740872dd31b67c4be4fb64b70998de6bed43f30b205930d401acdbc6550f6d964
Description: Bluetooth support (metapackage)
This package provides all of the different plugins supported
by the Bluez bluetooth stack.
Homepage: http://www.bluez.org
Package: bluez
Priority: optional
Section: admin
Installed-Size: 5694
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libasound2 (>= 1.0.17), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libedit2 (>= 3.1-20210910-1+apertis1), libglib2.0-0 (>= 2.31.8), libudev1 (>= 196), kmod, udev, lsb-base, dbus
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: pulseaudio-module-bluetooth
Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Breaks: udev (<< 170-1)
Filename: pool/target/b/bluez/bluez_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 1147836
MD5sum: a86fa60e849c83f64630e50384c96926
SHA1: 1af1120df74f300627f3885e99bbed2073110c29
SHA256: d3cf6454474cc82aa8498547c97b6dfa3b859cfa396cbd146fcfcbab9cf7c822
SHA512: 8138337ae2b957c190f276ef702dfdd45a0b492492727228966b6ae7b54e0aa231aa484d12a3e440fb0483f76916bcc63ae6291feb29a935a29e078269166d79
Description: Bluetooth tools and daemons
This package contains tools and system daemons for using Bluetooth devices.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: foreign
Package: bluez-cups
Priority: optional
Section: admin
Installed-Size: 284
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0), cups
Filename: pool/target/b/bluez/bluez-cups_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 116944
MD5sum: a4dc25e846c8d3e92aa759f3dd87e2fe
SHA1: e60db3eed7bb7fa26322947111f6113b912f2e2c
SHA256: 7e63e6f733b6d815380a2b9019f5cc84474896e04ff0775859c621b9f1541577
SHA512: 610399db8ab3e52a2690ea9789617b6bc314290d31d30f754210d982269d6c2fbb1385e102ccf665639a3484ad4f33ed4bbee6a06c3616bb7c6d843fe53f7c42
Description: Bluetooth printer driver for CUPS
This package contains a driver to let CUPS print to Bluetooth-connected
printers.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-cups-dbgsym
Priority: optional
Section: debug
Installed-Size: 181
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-cups (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-cups-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 156024
MD5sum: f0b92039065fb42cc41eb3ec2cb1a3a0
SHA1: 3244056d9d696b7d1d46115d0b5de87f917393d6
SHA256: 7450eaf266dcfcf20dc21d4d7e4bd229022bfac35f0321f65b3423ef64b0611d
SHA512: 93701250b2f8720362c282a5ebabdecb1fb9fe2fdb3cb1fdd38ee22c3a5c005c6ee8643534d81af86dd5c05a529b96d5d601d09480414d523e503d8360093c1f
Description: debug symbols for bluez-cups
Auto-Built-Package: debug-symbols
Build-Ids: 9997e4a0c5eb9ea80e67b59c84ddf5cb63b7db45
Package: bluez-dbgsym
Priority: optional
Section: debug
Installed-Size: 4583
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 4057480
MD5sum: c322e437c4e3e676f52814e1faf2398b
SHA1: 30c00f125f244d985a54db02312478c9ddbb9617
SHA256: aa018f7e2189ac9ebff4126ad93a43736310adf267c224e10ae299725447540c
SHA512: bab55130e7b9f2ea5bc4ec37c86a6ae3866be90fa7bbdc87ae09c036ee01e1965a6aa2bf4cc272b6b3a85dd5bee627876791c9c01c2996ef2634a59f032ac4f1
Description: debug symbols for bluez
Auto-Built-Package: debug-symbols
Build-Ids: 0dbf2159bbc5a35967f28e2e2e2233cf38ce591b 198484363f4355261c78bb1f11b7d288cc4d4f93 32b87d4c301d7bb4e6b16607504b22b7e1f59474 51a8026ac4416c7c87c1495e10550e0537a341ae 5668beb9ead416d74352bd0b6a40fbecbfa59a60 58b3c3c66e211b6b12e96ed195d0e09c4f9f794b 6c1965b7409fa6e084f197d5ca2ea5aad617ebe5 7d42031abb640dc5696c2527a34ae37e84e1f779 8a3552729ecc4d744184ca0b834ae735ab4c16d4 8a82d3c1a4a7b2870a16a691a25389c4757d33ee 992b13c335443e9a9c9256e4ada15b910e270538 99b665899ea9de01b25aadf361f960111338eb40 a419c8bc5c7d99048e0649da19356086d9be5153 b997fcd961f724d9d15e8eaa926511ac7d55bd1d d33ed19953820e7d2d6f2bfe9f9ba9ed3bc22875 d8abfc2c2a9cdfdda99d6144ced3dcad6d215c33 eaeab58f364a3e1e3ac3ae742c3ce7814a82b756 f326f39b440fa3b6e492f360b51a162638fe71de f333e7e60114b0c31951894d9cb5c970a6003473 f6e337f444e3f157bfa5057ae4218a8dd5b56c39 f7725b4a349b49c549d2d495d845caad4c725e32
Package: bluez-hcidump
Priority: optional
Section: admin
Installed-Size: 601
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.14)
Filename: pool/target/b/bluez/bluez-hcidump_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 208372
MD5sum: e8075e84d8fda51fc67b8fd582c097b0
SHA1: 7b1923147cba3edd37f898c3ab4fb7e03482a805
SHA256: 5cd88c896fa527086ddee7c9669ceba5546acc04b5e35297571894a65562c2f7
SHA512: ac4dda58a7d27c796c3781242532d08ae831f334df3afa1b3c871039c06381fd00e372aab680e5ee83a3cce5b8243c9fb2aac92a73f889b7cabf6755fcdb4693
Description: Analyses Bluetooth HCI packets
The hcidump utility allows the monitoring of Bluetooth activity.
It provides a disassembly of the Bluetooth traffic and can display
packets from higher level protocols such as RFCOMM, SDP and BNEP.
.
This was the software that is independent as bluez-hcidump, but this has been
integrated into BlueZ from BlueZ 5.0.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-hcidump-dbgsym
Priority: optional
Section: debug
Installed-Size: 613
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-hcidump (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-hcidump-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 598992
MD5sum: d34a2675c7faa123822672015db77b7d
SHA1: 0e31362d286eccc3d5e3588f799af8abb832bd5a
SHA256: 010346047548f3c60797b153310e1511f1a7f20ceecdad659c56554c9a4604b1
SHA512: 7b1469456b5d84a3ad254b7734541ddb54235b87416c43ca55bb93d5e21fa1d58f6f5caea8238dc44ed0e2891be90028596e7f0f6ed27289ea2130dfc82a6f20
Description: debug symbols for bluez-hcidump
Auto-Built-Package: debug-symbols
Build-Ids: 691ab332fa71233b092f5f248d7787b3df28b839
Package: bluez-meshd
Priority: optional
Section: admin
Installed-Size: 906
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libedit2 (>= 3.1-20210910-1+apertis1), libell0 (>= 0.17), libglib2.0-0 (>= 2.28.0), libjson-c5 (>= 0.15)
Filename: pool/target/b/bluez/bluez-meshd_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 296000
MD5sum: 358c356f118c883e79845a9c6dab3c69
SHA1: a74bef2b1222520fb8688538bbdaf72a9e91ba52
SHA256: 57eec6042d8ee2ac57a41722064511876955c3000d0b3f81c3f7b6c38d3106d1
SHA512: 2fcd8821faa0a918dcad0964d1b694af20faf4e9f04c712c496c2e4daf303202fbaec890138cbce8cbc81c98679c2499d99ca21a150a41a086e023a9514caba1
Description: bluetooth mesh daemon
The Bluetooth Mesh network is a new Bluetooth feature that extends "Bluetooth
Low Energy (BLE)".
.
This package provides daemon (meshd) and tools that provide Bluetooth mesh
functionality.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-meshd-dbgsym
Priority: optional
Section: debug
Installed-Size: 943
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-meshd (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-meshd-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 838088
MD5sum: 194e3481ffa540154ee7b78bd80f512f
SHA1: 04286f2ca52325232c4d61ede71fab8cbfbfa49c
SHA256: d2df94ac8257a3adff03f0ea2f43610aab347427d2dc1f0c5c6c6c07f6930215
SHA512: 0540fd9064632dd9d35ec34ea7197af92d3d276eaf065ffbffcc1abb7747b36e4f3639d75a5ba4b445d63221922356e5b2fd691fc9c407955ca24e1e4ded6529
Description: debug symbols for bluez-meshd
Auto-Built-Package: debug-symbols
Build-Ids: b09980e9db41c0b7f7bd4af2ffd072e29db0b6b6 b2dd82f235962fa99cb2efeb23aab3cd95c2c8c5 dce868ebba4298b8e2ec3c899e1dc5741de5fa67
Package: bluez-obexd
Priority: optional
Section: admin
Installed-Size: 628
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: obexd-client, obexd-server
Depends: libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.35.9), libical3 (>= 3.0.0), init-system-helpers (>= 1.52)
Recommends: dbus-user-session
Conflicts: obexd-client, obexd-server
Filename: pool/target/b/bluez/bluez-obexd_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 228452
MD5sum: 9974be911fd0efac84ebce2e560d1723
SHA1: 8acd78b4f33ee2726228dd674f2f100acef48c50
SHA256: 43890016aed1a5780e0292654745512557b38a351db3984973a2c6b88de9e100
SHA512: c50cb17e48c10712ddd2ba4eaa754db6e638b576ee2f61ff62c6b7889c99397b80037c455c71c8ff7aec21c9a0c20f39e288a2b4d4dea70ac0b5f2241a2851a3
Description: bluez obex daemon
This package contains a OBEX(OBject EXchange) daemon.
.
OBEX is communication protocol to facilitate the exchange of the binary
object between the devices.
.
This was the software that is independent as obexd, but this has been
integrated into BlueZ from BlueZ 5.0.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-obexd-dbgsym
Priority: optional
Section: debug
Installed-Size: 568
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-obexd (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-obexd-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 501616
MD5sum: 0cfbade6e24c775707784fd4dec9a95a
SHA1: 3b1703cc3d833f7b5f2e7ed77d7a0f4f63f495c5
SHA256: 60cccea934273e143c65f33950bb3cea16312d7d4f18395278025122f4b1d5e9
SHA512: b2cd508dd3e17182ad4be32219aee8731c20a25bd859961494590cd6e3e4420980c3fc6826d228f2b312b1d12597945746bbbf8679c796929554b270091ab75c
Description: debug symbols for bluez-obexd
Auto-Built-Package: debug-symbols
Build-Ids: 56ee954dfc5e2ddfc5d89ee26d6e88b0c763eb9b
Package: bluez-source
Priority: optional
Section: admin
Installed-Size: 32998
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Filename: pool/target/b/bluez/bluez-source_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 33706904
MD5sum: 0a8d6a542f6bb3411ef8d5eda8188ecc
SHA1: 24f197c77ae83dd363feb9b32c30108aa3e538b5
SHA256: b58c518384267e4142af0e6b3cda0896cb6bef2cc8da766607d6bcc85a00227f
SHA512: 826135247f5710f63314071ebdaf6919cfcb4f0f32b782613d4d0f83d2131ccf7b2797cf05ab65eff6a897966710fc74fc78d7bec07b925be242edab26e5ca89
Description: Source code for the BlueZ Linux Bluetooth stack
This package contains the sources and patches which are needed
to build bluez.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-test-scripts
Priority: optional
Section: admin
Installed-Size: 297
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Filename: pool/target/b/bluez/bluez-test-scripts_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 83504
MD5sum: e8b3c3f322a96e354432e24b9994f2fe
SHA1: ef158919c110fc676acaa6319dc3c795eb725e8d
SHA256: 3d4c6f7eaf7baa45419cba0d1742571a69898a1cadc994c3365355f9bc1ba0e8
SHA512: fa90af13b890c11edd6efbedaae2efda7f2e5d5b3e8048385eed0432e12abfb3c7799b9429ee5b5c5f38299b5e6beecc83daedf1d77dbba15804582c434fc9a4
Description: test scripts of bluez
This package contains test scripts for using BlueZ.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-test-tools
Priority: optional
Section: admin
Installed-Size: 2879
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.28.0), bluez (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-test-tools_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 361052
MD5sum: ea8773fd53a498f5a37bc6dd9cb3a91d
SHA1: d40ead9653999695362e0427ff13b898e6e43a1c
SHA256: 8051f0b188efe19494f539e0d811a1dc80cabe92e5fef62f888c6428e5e4f826
SHA512: 51514815fb46b4546577e35154535a5eb7af87c9d810f947e5e511d342e65273310116216bfef91ac821d0b14d223d892786368a09278bb83d9d88279a78ed24
Description: test tools of bluez
This package contains test tools for using BlueZ.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-test-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 2228
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-test-tools (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-test-tools-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 1909276
MD5sum: 478deadad1b46dce6bff0af867222807
SHA1: a080efa32c924c332399857668fc1a9d6ac08615
SHA256: b54feddce18e76494817e44ccd01cd118032897425f324544e24ecde117890bd
SHA512: 122322b7c1fb203340ec96911ccec870244600a47ef84de839bc96229de86c450a3a32d138ec574f02b26a0f0c4fcf3f464068dd499ce9583d27962f61c3edfa
Description: debug symbols for bluez-test-tools
Auto-Built-Package: debug-symbols
Build-Ids: 1e51dcae6c4174e568250e34ddf3c1bb243f9758 2498b018ba2cd00c779f79841f7f0598755e308c 3d82eeee2c16824462e2b884e68874133fd88ad0 479c71dbc04de8a87d620c31481a85bd99103e96 64435fe944238cbeb577441207825bd4a20ec441 6ba8da47966859ec727a87b101353a20f3c4da48 7f13b644b309a9c00b1dab5a58c9aaea324efa2a 8a04bc0bb582007139fa842090a06715b842fa34 a8c2e3ce3e4da5c769237fedf0b3b44ebd35c344 c9f73f5aea638b97cf97d816a7bf4bc2085bdf1b da9e2dacf110175819d3a498eeb8e0eec1892e63 fc1c2408bacefc3683fd89b11472c05519a09029
Package: curl
Priority: optional
Section: web
Installed-Size: 436
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1), zlib1g (>= 1:1.1.4)
Filename: pool/target/c/curl/curl_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 274160
MD5sum: 7ff5b536bba2e5eafeb37ffd077be114
SHA1: 4e5672cdadc3395ee6797326f9bb67a5e1b83e01
SHA256: 41fbae9b8419b9b7eee7fc7c0df6e51068975a694e7f92372497740f485916f6
SHA512: 0020398974a831570ec737a570002df95edf9093ad48d82901c0ce6529ab8b0ca875763ab0d789b3390a08fb724847cd2b9a2ae65202c413718433bb6293451b
Description: command line tool for transferring data with URL syntax
curl is a command line tool for transferring data with URL syntax, supporting
DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
based upload, proxies, cookies, user+password authentication (Basic, Digest,
NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
busload of other useful tricks.
Homepage: http://curl.haxx.se
Multi-Arch: foreign
Package: curl-dbgsym
Priority: optional
Section: debug
Installed-Size: 168
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: curl (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/curl-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 144884
MD5sum: 9cb59c755c109d34497db45d5155f3f7
SHA1: ec8037d7277f732a80b755984923bf3deef60de7
SHA256: c57a5b082af0720b57f7252cc945226728e6217e0414ff044ad0750720ec5d0f
SHA512: 994dbbad7df839798046b01ad9393f9a8224da76359d7a371eb17bb6531bd617dca11ff608b1373fcc8c901b4b94fa6a33be478c6f8cb77e2a22339bef4f7c6e
Description: debug symbols for curl
Auto-Built-Package: debug-symbols
Build-Ids: 448337c28fdf01348fe0ae3529998287fc2468aa
Package: gir1.2-gst-plugins-bad-1.0
Priority: optional
Section: introspection
Installed-Size: 2074
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), gir1.2-gst-plugins-base-1.0 (>= 1.18.0), gir1.2-gstreamer-1.0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (>= 1.18.4)
Filename: pool/target/g/gst-plugins-bad1.0/gir1.2-gst-plugins-bad-1.0_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 1955656
MD5sum: f390218921f66142f118322f15f100c2
SHA1: 2747e446899d6b92635ea5340039426a7dbac209
SHA256: 6c3d7d6d32986b54bfb2f2165f82a697de5df60afa34f4eb3dff6e3cfb8122dd
SHA512: b1f92a7826733234a39bb41130bb4f80475dbbeb20b1578bdc0c471ac181c47bda41bb191f5c08bee78a3e5c2ab6351b0dcf5827fd160b10f92b8e15b0ff5246
Description: GObject introspection data for the GStreamer libraries from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains introspection data for the GStreamer libraries from
the "bad" set. It can be used by packages using the GIRepository format to
generate dynamic bindings.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: gir1.2-javascriptcoregtk-4.0
Priority: optional
Section: introspection
Installed-Size: 469
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: gir1.2-glib-2.0, libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/gir1.2-javascriptcoregtk-4.0_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 213832
MD5sum: 3ccc30f4a123ee87fb1ae6fb781a0d21
SHA1: d1c16801519738fe43cc1445f0d9ca003b6194d6
SHA256: c7dc94363454e7918965abd2f669281a4b818bdb0913b388fa2f3df87a2d718b
SHA512: ed3c8d6bebc6b8e9e45aac55552b77f3951430db2d1eeedc244d8b37c8322cae3138ba19fd6a1644f8e5b08230c2db8b6e4c03ab5c1a8f5362f38cb2fdb15066
Description: JavaScript engine library from WebKitGTK - GObject introspection data
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package contains the introspection data, which can be used by
packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: gir1.2-webkit2-4.0
Priority: optional
Section: introspection
Installed-Size: 762
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gir1.2-gtk-3.0, gir1.2-soup-2.4
Filename: pool/target/w/webkit2gtk/gir1.2-webkit2-4.0_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 266672
MD5sum: 2d4d59b4478d0f01d88fa4fd1f2bc206
SHA1: 01989c9214f3433ed3da7a333c33886fe315fa36
SHA256: f2673662b0a83f532ffbcdd6574cb6b80db7053afcf7b9a3396f0795d8266708
SHA512: e0749b4a30a30e1b1e6107698bb63d8bc3c7f2906805f29690b24ee3585fc6e129c51abd9aee20146ef289076ebddf17e14ccd5aa463792be7f7e2ad5cac4986
Description: Web content engine library for GTK - GObject introspection data
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
This build provides version 4.0 of the API and uses libsoup v2 for
the networking stack and the GTK 3 widget toolkit.
.
This package contains introspection data, which can be used by
packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: golang-github-opencontainers-runc-dev
Priority: optional
Section: golang
Installed-Size: 1301
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: all
Source: runc
Version: 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1
Depends: golang-dbus-dev, golang-github-checkpoint-restore-go-criu-dev (>= 4.1.0~), golang-github-cilium-ebpf-dev, golang-github-containerd-console-dev, golang-github-coreos-go-systemd-dev (>= 20~), golang-github-cyphar-filepath-securejoin-dev, golang-github-docker-go-units-dev (>= 0.4.0~), golang-github-moby-sys-dev (>= 0.0~git20201113.5a29239~), golang-github-mrunalp-fileutils-dev, golang-github-opencontainers-selinux-dev (>= 1.8.0~), golang-github-opencontainers-specs-dev (>= 1.0.2.29~), golang-github-pkg-errors-dev (>= 0.9.1~), golang-github-seccomp-libseccomp-golang-dev (>= 0.9.1~), golang-github-sirupsen-logrus-dev (>= 1.0.2~), golang-github-vishvananda-netlink-dev, golang-github-willf-bitset-dev, golang-gocapability-dev (>= 0.0+git20200815~), golang-golang-x-net-dev, golang-goprotobuf-dev
Breaks: podman (<< 2.0.4+dfsg2-5~)
Filename: pool/target/r/runc/golang-github-opencontainers-runc-dev_1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1_all.deb
Size: 233996
MD5sum: 6b66741335663485105e3256e02215fe
SHA1: 5c6aab1ca30d1f82f7412a2ab4d5973f178ae2de
SHA256: b2aada4e357a06a80ab00865021d24347ec94fa734a195af3a793da4dc8bbb80
SHA512: c1d872f2222d33e6de328410b0d5c7a3036232ec68d0d8ffd33a39b8899776291c301a4163cdd4d79b0d72d12e84f1f281b401b0aa5546b2eb31fb8e48e1831f
Description: Open Container Project - development files
"runc" is a command line client for running applications packaged according
to the Open Container Format (OCF) and is a compliant implementation of
the Open Container Project specification.
.
This package provides development files formerly known as
"github.com/docker/libcontainer".
Homepage: https://github.com/opencontainers/runc
Package: gstreamer1.0-plugins-bad
Priority: optional
Section: libs
Installed-Size: 8161
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-plugins-bad-faad, gstreamer1.0-plugins-bad-videoparsers, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization
Depends: libbz2-1.0, libc6 (>= 2.29), libcairo2 (>= 1.6.0), libdrm2 (>= 2.4.47), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.53.2), libgstreamer-gl1.0-0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), libgudev-1.0-0 (>= 146), liblcms2-2 (>= 2.7), liblilv-0-0 (>= 0.22), libnettle8 (>= 3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22), librsvg2-2 (>= 2.36.2), libsndfile1 (>= 1.0.20), libssl1.1 (>= 1.1.0), libstdc++6 (>= 4.1.1), libusb-1.0-0 (>= 2:1.0.8), libva-drm2 (>= 1.6), libva2 (>= 2.2.0), libwayland-client0 (>= 1.11.0), libwebp6 (>= 0.5.1), libwebrtc-audio-processing1, libx11-6, libxml2 (>= 2.9.0), gstreamer1.0-plugins-base
Suggests: frei0r-plugins
Conflicts: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1)
Breaks: gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 3608996
MD5sum: 0c34b50f1170c8cc9cbbe98c78ea9a88
SHA1: 1919a7a20c10289bfdae1a1ef929b267d602e2a5
SHA256: 092fd0870095db9c49565d99efdd8be1e5f77d8dce221cd1ad552b4a09cb5f61
SHA512: 4e81ef14995de0bb7a258399caca44f7ff10a0f2e6b3f7f220060097dc6ddece7113280fb336fcf51490c8408d3f7e275b5dbe2072b58edd3b736dcade75c0bb
Description: GStreamer plugins from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: gstreamer1.0-plugins-bad-apps
Priority: optional
Section: utils
Installed-Size: 1974
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.44), libgstreamer-plugins-bad1.0-0 (>= 1.18.4), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 1934408
MD5sum: 1ad30b3da4725b92ffa47c8021f56776
SHA1: 734f09830ec6b9683b64e847fdcc756493b42b1e
SHA256: d4e5b6cde9203b7fb6a48a2100a1529abc74f5b11465cc1555e2e6b353623cc9
SHA512: 398e38c15d4b2812117ceb0b1ba290f9c59f5970f0312023ae7eb4fd93e9d18bf265294e08fdbde22c6c1353bd1c4e700015a138f9d63ffbc98643d245361cfa
Description: GStreamer helper programs from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
This package contains helper programs from the "bad" set, a set of
plug-ins that aren't up to par compared to the rest. They might be
close to being good quality, but they're missing something - be it a
good code review, some documentation, a set of tests, a real live
maintainer, or some actual wide use.
Homepage: https://gstreamer.freedesktop.org
Package: gstreamer1.0-plugins-bad-apps-dbgsym
Priority: optional
Section: debug
Installed-Size: 36
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-apps (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 19732
MD5sum: 7759ac87980864d0e288cfb63bbd227e
SHA1: 968c31b89d4c767d82d8e529a1f1d6970446a4f8
SHA256: 0b12cb9612431ba6c373e202c3b54355d380c0a7654dc7c2f15d72a2e2ce4720
SHA512: 4eda5b731491c755c9137a784563ec2aee8201908b96dcfb226d4bc45128116e50fdadc90ae5d3dcaab63011b5b7dd8af743c6424e6c8a4e3b1b6bfbde70d8d5
Description: debug symbols for gstreamer1.0-plugins-bad-apps
Auto-Built-Package: debug-symbols
Build-Ids: 20433930f583730dee9f2b5a689b92cbf0325da9
Package: gstreamer1.0-plugins-bad-avtp
Priority: optional
Section: libs
Installed-Size: 2042
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libavtp0 (>= 0.2.0), libc6 (>= 2.7), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-base, libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 1956608
MD5sum: 80a8221aa694ec8355c9d29d038eb078
SHA1: 06553f2e6e1f2472e3d9da5defbfc34ee3ca3764
SHA256: 7904014e2558223f460e0d07a82cc674216d90c8db45983174a031c9fb32e348
SHA512: 163fb5160e0c71027d7ed2bd68c605edfdc921fe2cbed78dd288a023cf5dd1b5ca694cda6106e41402f9dc588cfa9d2d4e6db001ce85bb85733a6c02dd637067
Description: GStreamer AVTP plugins
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains the AVTP plugins.
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: gstreamer1.0-plugins-bad-avtp-dbgsym
Priority: optional
Section: debug
Installed-Size: 119
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-avtp (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 95532
MD5sum: 9323f59b45254b1bfa3dec25b64929c6
SHA1: 63cfb7cce00061e02ddd5c162443e0fd5d294037
SHA256: 2b7c978af135fc488ff3f84ef3692e8942525ec18f3a7b3ed4e238b7a82f1378
SHA512: 79ce69066de0a756f4dc2b099cbc829d9c92924174aaa3eb5470762cbc7b5f6653f7206c99cf6bd80fce0aaa8f4f553f1b870aaf4b8617732a38ba70989690dc
Description: debug symbols for gstreamer1.0-plugins-bad-avtp
Auto-Built-Package: debug-symbols
Build-Ids: 0efbb1e100f20338e6e13e651fcb083e12f38873
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Multi-Arch: same
Package: gstreamer1.0-plugins-bad-dbgsym
Priority: optional
Section: debug
Installed-Size: 6387
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 5136552
MD5sum: e28ecdde9539ffc8862734d5f2ee0fa1
SHA1: adb67a74a88487662b6d758496269bb57bbfc34d
SHA256: 19b13202bc26bcaaa8a321f5d5b440983bb0acc44d0c5ed88582f591e2b3e067
SHA512: c2d858e9c40915b39d2ad6ffb5a2b8e7df9d262470dd4baf609eef9b4d76b95290826b762a5bdce6f26fae365be84b0cbe3d4d55d789fb96b747e24c4d0f8265
Description: debug symbols for gstreamer1.0-plugins-bad
Auto-Built-Package: debug-symbols
Build-Ids: 00a509aff7bb2fed564a219c67a86b773c52d494 02d95290bd0f2ce9e7fb77e4d64bdfd77ea95095 0942d4d9d701321fca753bb1f9d0a27b1d069a06 0aeb59f8b92337ec58487313f760bb15f395c0b7 0f679ed045eedbe6a2f3d543fd63a23c60462bfe 10937b01d0df595764ef8b3e336898a755953ae2 11607f7dbd9ec24df894a1fcea04a96bb1387e13 1276b2219e209997a8017e330a4b30b9e025351a 166c311a155a4b6d278a75261b8f5f765abd2b5e 17c024b8fd3262870fa4799495fca20f3cb1909f 18e73ac272e2077f436c06ed6f0253502ad563c0 1d1b480f3bd87851f0fb00216e5100bc6bc80319 1d61b48b56d5e41f7d581c10891153c4a22882b2 20bf08770c85173571e33c4ab348520465872003 2593febb8e52d382e0b178976448ebba68115e0a 26187d99c3235a289b428db4e904c18d6c4c2d80 27929f28e59d1103a2da1a700d638e00db00347a 35429b7abe9ae1569ff99a4e287d9e73fd5102ff 3b2fd411d0b92bc36c846a81f40c6fae5a357382 3cbb9d8e1a9ebefe49f407a7a6d7788e6a413059 3d951d1c67aaa856712f6c6d0a5aaee96510795b 3e97f962f53985584bad3fc6c7870603428ac3f8 3efc385b43b93dbadce3a7d13b9f2cd5e5ad40b0 424fa0ccc72bbcdb14fd4c028891362e3798ef00 44450f22a6166d9dda2934bc6eb920af33e9fde5 49bd203feee562f140b8f7a9ea66b65d2c59f06b 4c5dffcfe24bb1a7bbb6b31560830a1134450953 4f68d6d69bcfb9bcc21eda39ba6cc721010871a5 52da1c331e8122440e3f23cb8b8394f5b8c1c3cd 55e39cd6142bd12674c14a87208ad98877742b91 5c3c8cd3747edddbc0e6f6af8acdf6d287dd59ff 64660dbc49006c37fa9b5fb12163ddc71281ea08 648d581edc5b0cdd0bbca1c288a379c561e463fa 64c135379ef34ce82409dd5220344f93d7b9d62e 691c8c2b6f994f7fb56e7ef774c21f08dee7cad4 6a2504134af0d949ad3ebce210bce4c091301378 6b5edc31ba793402ae325856a122ff13c80cff5a 6d34809631d4db32f1f6b0f2329e3892ada3eb55 6f8f563c578e4dfdbcda244b1a55c2973d076edc 7488aeaa97e04b182312e2107b38efb9e73de7db 74abbb26f854ec1b0c4dcb23cdd6c8394a584db7 76d5fc9de8bcc6354916edab1bb72ef4042bfa32 77b08639e304f3b530e7a3b8626caf42b5a44ec1 7cf8a19b2149b6cb57f96a342e757d09b15d1346 7da7edcfde92753fc1cf69fbc083c5b443b9fa0b 7dad861e460d333dfc58f8c2b832123023dd6276 7ea649d689a6dca65645f4c1c47819a5507852f0 84ea666bb4dae7c0b0970a729e93aa7dcdddd079 8ae23dbaf0703623d4b1084d6d85806f8d0e5b21 8b34196cccaed7cf654883d4f9b7498443bd4ecd 996d57316ae1470e8db28bf4ea81f742ade6a430 9a0c6afa04d172e95364fd60d05639730a25b571 9a677d797f88182d030277a5ded56ead9a70a6d9 9ab397ce66fdaf221b4fe9ecec472b307a047aab 9ce24380bb70cff911ae7bd82bee73c4b443b46b 9e9e95d8479cae0d5257254afb9c0a2fcebbf6e2 9eef456628a3ffd9a487152c6588398edb65aaa9 9f33149f4145d872fa8c38ad358390b9e23a87df 9f4262753a556e9630491d6024b914caa1bce137 a44dc32a0a9aaa3745b2879b0866962130f0fc44 b2bc7dd6b5af546fa8e8a7b0150a73657c2346e5 b7cf3daf1bfa95b4b9acb8bad08e905a074e43e1 b9137a3a10d5cd6b7c38f0863fa43fed48d42c27 ba1bd2193e00c12dff06399ee16fd0c44882a36a ba4b1c7ea15dae37f202f157673b675c0a9777ce ba619f65f1c6721368779341998dce8e41498c52 bc082448dff17f8219922bde88676c235b344987 c02d075797607036334ef0ccae179ff860fc11fe c32b16f82bfae7da81c8186a5a83f78e298731df c35aab9a70db1928f494d2cb79322e973d24b793 c463293857959432af3576aba5f0d1c057157f40 cd9b295992851e3c6f12588f080b4433ca57685b d09502c8576388f6464d9e8b95ae6b773ddd7ba2 d353aa4d5d725700d5b4c29be1c69f999b08e751 d54ec0e16180542dc895a847d7c12207297243ff d90bf03aaad74f0ae46b2e609348eb23c7cf59c7 dde0db7d1e6abef43723e2c0f7ecadb127e218d6 df158c3da383a3631766d03d1fa208bbaf381cfa e59210ee7e8018302b3158b8d9b567dcff8ba97c e86964189b41dd5e384dc4f3adc1d4e000aaba20 e8a850b9ffef0dd8cc995fe8a99f0cb0fea359c8 ead8d617daffb97aa5dccd5ca5dca4aafec7adba eb9843d3bb2a3d2a220bca5642d26ff1d98635ac ecf7107230e78d716f38da420542f472de3dc924 f4aea1bb34d4db3b0a4ed8fdcae5f0fbb58e45b6 f65a320ed62cfe6de5eefa26038fd22c1ce1973c f941fd3a2c20c44a87ff0aebdb30e6660fd2e753 fb137e912bf5c5460bef58c1d8bea375e599f6c9
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Multi-Arch: same
Package: libbluetooth-dev
Priority: optional
Section: libdevel
Installed-Size: 823
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: libsdp2-dev (<= 1.5.2)
Provides: libbluetooth3-dev
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1), libc6-dev | libc-dev
Suggests: pkg-config
Conflicts: bluez-pan, libbluetooth-dev, libsdp2-dev (<= 1.5.2)
Filename: pool/target/b/bluez/libbluetooth-dev_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 238492
MD5sum: e45481abf4afa4d04d819a46d5ab20ed
SHA1: 02e25d83de2764d9f40dff4f52c1282d3ae3ad82
SHA256: 1a551e3362ce18a3e788fef0285f964b6bc6539ebbd0e83fe7d7609e64d41f5f
SHA512: 979c9f9576ff135b0110a7c5549f5f3bfbd4d5a9820b7c72acc7f426a6626e03d28add266b14b3c014091c6777b9df3ae5d5edc3d70b5c4c37e66d67d34ab1eb
Description: Development files for using the BlueZ Linux Bluetooth library
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
.
This package contains the development libraries and header files you need to
develop your programs using the libbluetooth library.
Homepage: http://www.bluez.org
Multi-Arch: same
Package: libbluetooth3
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: libsdp2 (<= 1.5-2)
Depends: libc6 (>= 2.15), libudev1 (>= 183)
Conflicts: libsdp2 (<= 1.5-2)
Filename: pool/target/b/bluez/libbluetooth3_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 118220
MD5sum: 39dc70763b23ad5bb960b9ef3ab03b08
SHA1: 0cc61c0f4cff3cd283e68175cc7158f802e5579d
SHA256: 503edba4d368729e8dac5585e5a5b91123e8aa75d7718c8803411e0c901cefe7
SHA512: 66cf0ef015502b8ff86383827af527738b3ce78afa3a2100e4c3e63c8b06b09efc56da2043f3558dbf5e303259ec7217e28594ebf12cb3ca7e571d6a16371676
Description: Library to use the BlueZ Linux Bluetooth stack
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: same
Package: libbluetooth3-dbgsym
Priority: optional
Section: debug
Installed-Size: 164
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: amd64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/libbluetooth3-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 132100
MD5sum: 6263a8c699d839cb0e6071cf289c6aa9
SHA1: 9e53a7ddc5f0bd234442d0d0bcdac5241c6745ab
SHA256: d4d7d47bdb67162db21eb4827da1336526417d019a06859cd2590c810005de59
SHA512: 319796928344f9e2350cb1b7f48fa5922dac219a28d6db83f174d7a38cfedfcd3cf0b9b9bba435896bb565e8ffc4fc6f1781910a87f1da1b3ffbf3b96c1b7cbf
Description: debug symbols for libbluetooth3
Auto-Built-Package: debug-symbols
Build-Ids: 0023797dc2fde2f3593e662603042ad1cc1227ea c63198a33b87398b04a29eb21bca55991b22328a
Multi-Arch: same
Package: libcurl3-gnutls
Priority: optional
Section: libs
Installed-Size: 737
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgnutls30 (>= 3.7.0), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-gnutls_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 346352
MD5sum: fc579bf68a67b106bf2964aba0193cc5
SHA1: ebc15095d82bf7552e40417a52e40b3c67a81ed5
SHA256: b12cec725549cfe3667c26ee8811478611cd0f4645ed41e0dcb1422c08a7b661
SHA512: ffe767f44bd27e0ebaa4fadcffc6410ee92e8e5463b65b5130bef3c8619a7d9459e0e86633e07f568fe61c99bf08885fe0cbfacee9299f814f55310adff9b59e
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl3-gnutls-dbgsym
Priority: optional
Section: debug
Installed-Size: 875
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl3-gnutls-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 816792
MD5sum: 8250a0b9d3a1fef85eb11687e5297b22
SHA1: e45544584f7bd27748ccce75ff7b0c54e107f979
SHA256: 778af74af0f2494a060cc9b53dd7c54716a73e5badc524e9ba6519123a9ca5ff
SHA512: 8f2645bfa2f06168ef5d1d36bcdc0a9b3bf227b9c5d338d8c41952684db39271639354a5a6d1792a78005308903c5a4418c805686f411c996ddc94ab1d521adc
Description: debug symbols for libcurl3-gnutls
Auto-Built-Package: debug-symbols
Build-Ids: f4c0c3df4951c88674a219a6945c8d4951bee955
Multi-Arch: same
Package: libcurl3-nss
Priority: optional
Section: libs
Installed-Size: 757
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.44.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-nss_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 353980
MD5sum: 73cc725a1952d2cb04f721374f91439f
SHA1: ad0e2666c37ad4d6f069ee4d4a834ef0c629d34b
SHA256: 35f409a542d38a9c16ba1994adba6b5cc7d37d4cdefbb0ae717b7f8a812682d2
SHA512: d7649fba1dfbeb6190c784bde1d4a73e2040656fc15a2fbce32f61d8f7f2846aa9b6287929fac62b17155b418862f99e67f075b3a30719549d6f08c89e9d3bfb
Description: easy-to-use client-side URL transfer library (NSS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl3-nss-dbgsym
Priority: optional
Section: debug
Installed-Size: 915
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl3-nss-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 859136
MD5sum: 45824e67b4ce484af5707ba2d73e0b0f
SHA1: e0f873c8ae95b45da8930e2945567a3af9eb93e7
SHA256: 9d52d6a2983c4b087c402692c9cab2de28b0a285e2761708d0388f80ace324c5
SHA512: a9265382e964b8fb3a03c894a8f67e7931a26baa0c665c4b5bacb49083d7052c9295d09dee4740419f027132d34348483dae051aae488d54bf77e755066937bb
Description: debug symbols for libcurl3-nss
Auto-Built-Package: debug-symbols
Build-Ids: a68cd2281db27181e7b181740ca8df8176553eff
Multi-Arch: same
Package: libcurl4
Priority: optional
Section: libs
Installed-Size: 748
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Filename: pool/target/c/curl/libcurl4_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 349192
MD5sum: 971125e1269f0ad0508cd5a9932de8ce
SHA1: 22353b925dd20411de6bcd16da846a076619ad8c
SHA256: b2b00c88fc01c14239c3e0495a7ff371964eeb711af3e57ec3ab94acbbd11911
SHA512: ae547f2d20e1d57062c0e52cce8928d5b421f32f3f3f8280034f366ffc2b1ea8d64f14a1a30f6c7cbc1d80812de586fdd38517d44eee3382191713c41d21ad2a
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl4-dbgsym
Priority: optional
Section: debug
Installed-Size: 895
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl4-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 834496
MD5sum: 6219752ea8aa5ca3d4b7f5dedf37bcdb
SHA1: abde113729311b896fcfabcb64b2888e2ae2451a
SHA256: 998f5c42171dee962f8feec8df60f26b902e0515d76cb37bbc8dab5b112e3171
SHA512: 5b8c1484adeea786e6e2d214a72db681162623603bfa20977ac99591b3f2fb42c79cc84a89c857a2db63ea377e188ff6fb772baeb11f0eb6bc511bca167094bb
Description: debug symbols for libcurl4
Auto-Built-Package: debug-symbols
Build-Ids: d04cff0555d84caf12d3367b816a604845c09705
Multi-Arch: same
Package: libcurl4-doc
Priority: optional
Section: doc
Installed-Size: 1944
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: all
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Replaces: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Breaks: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Filename: pool/target/c/curl/libcurl4-doc_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 1014952
MD5sum: ad01c7962e62d32da7b2650b0b7cdcb3
SHA1: 9e175562966da7faf2b835e44903b5f7f2392cef
SHA256: c0ee51006250943deb17aa666bd881a82844531518a15593a6636b2f7456c968
SHA512: dad84f31de73b7c7e1e29816329777e7c4642a78164ecb73fcf7ecbc20b6e7763cda34a6699af967191f6e592bfda5e837ea2b37e2a7faee7a64efba3481bbc7
Description: documentation for libcurl
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the documentation files for libcurl.
Homepage: http://curl.haxx.se
Package: libcurl4-gnutls-dev
Priority: optional
Section: libdevel
Installed-Size: 1577
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-gnutls-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 436800
MD5sum: 6252c11b6e3dc9c7dd7529514ad6d439
SHA1: 2f0753e1b51cd7f13f1d46c03db522bdd6277267
SHA256: 4c82e8b9de9d4d0e4cdd13fc163a50b64639f6948298e508c02f6c60b495fbd7
SHA512: 77851fff21cf56fe016b60b13a978ca2ab9819b5b4d279d20c1b182d7a2a5e3bf69977b68f59a3a6d19242c7525998f18406ae6bb3ede90593b310c555327b64
Description: development files and documentation for libcurl (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl4-nss-dev
Priority: optional
Section: libdevel
Installed-Size: 1599
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-nss-dev, libcurl4-dev
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, libnss3-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-nss-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 443692
MD5sum: 8f369f9a7b8fb9ed6cf8f19b64713124
SHA1: 086e0e37f6d585ed943b3e957e52b284235d8fec
SHA256: 7b26d205ae9fd68fbbef998092180477e1e67caeb86e8ad8b80fad4610c1cec0
SHA512: e446083f7ae3ebe1634130c016acf15cb1607bd0efa61019df982275a2f6a741ad81b552b89bce8db406b024dfda58198145372626cc1d6302c7e10450400483
Description: development files and documentation for libcurl (NSS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl4-openssl-dev
Priority: optional
Section: libdevel
Installed-Size: 1594
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-dev, libcurl3-openssl-dev, libcurl4-dev
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, libssl-dev (>= 1.1), pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-nss-dev, libssl-dev (<< 1.1), libssl1.0-dev
Filename: pool/target/c/curl/libcurl4-openssl-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 438668
MD5sum: 0dbbe2cca8e822eae149677062cc5553
SHA1: a1eaaf62bf869fd489be53c350204eb6311ae44c
SHA256: a0fee089ee4ac28a70d760e619255363499aa2825ce705a7f809994cf5e7bbba
SHA512: f7e0720d2e75cb87a510e944e4f67cef90bb51b2b2d131681af626bd2fbc160aca85987987b553abddb66b5c310a07974cb466daca471c80388a0357d7aaf96c
Description: development files and documentation for libcurl (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libgstreamer-plugins-bad1.0-0
Priority: optional
Section: libs
Installed-Size: 3296
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 2308720
MD5sum: c07f44db3ccc7cc1d2a951d0b61a2b6b
SHA1: 3d62a31fd6b743726c1615cddc13a0e3a2c8ab58
SHA256: c4729d925d6fe7da3cf1dc309376e050bd89b315a2afa6756b1012d201817f58
SHA512: 3ac76fd9ed8ad93a43c939be255e6abd9cafefeb8da2f7e03701a234846b91a0a4badf59dada8218241c056e162c41263c8cd6a03555d01dad1d7f3d1a4fb1b9
Description: GStreamer libraries from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains shared GStreamer libraries from the "bad" set. The API
is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: libgstreamer-plugins-bad1.0-0-dbgsym
Priority: optional
Section: debug
Installed-Size: 1416
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0-dbgsym_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 1196776
MD5sum: c2a6142fbab953d9a483f9d2c240e070
SHA1: a8554071e7d4cd3e7160dade7b3da43043862d85
SHA256: 43846c396a41a0492e4708e1089029185acbc5efc4d11f19db2fb604bbf1ef3a
SHA512: 8bd1347915ef214b8969314fe5b567f627eca886a8173e977f3e61f5261a62d2c45c2e749e67269219c554a5bcb56f0302a957649dd2295065f92854ed2552e5
Description: debug symbols for libgstreamer-plugins-bad1.0-0
Auto-Built-Package: debug-symbols
Build-Ids: 1af4c378166b5aff8b8701e8c6f63cea79a0821d 1b6eec14df1f2676984ec36094291e6b94f23761 248a2766df58bdb5ee00d944defed5bf46331758 2c55e1bf12e67345758db25e9b2aa92253bf6579 3695667025ea10e9a209e505bf36f4f9f56d0932 391f9c026d1dcef2e5aeb8ba7a3caabbdfb6abbd 5649b6beec8f99616341d14d27602ce4c7e64298 57a488241d9fb04682d3c3f3aa81bff814973497 637899159b0f15d47ae708d06a52bd549e91eca2 6ad1867551f8909fe09d12321649a89755906598 6fa833d4e22a36667c36b0994996b4e83576bf4a 8186fe877b8898b7c4f1896db49b7f82f9ac4373 84fb6e603fd2355468c99ad813f2a7cba8cd5c02 eb8c077b13d10cc91984ef8665038ec7bca14f73 f225ed9986c0e9cba15fd51c1edf7838d5dbdc96
Multi-Arch: same
Package: libgstreamer-plugins-bad1.0-dev
Priority: optional
Section: libdevel
Installed-Size: 3500
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: amd64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2023.0cb1
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1), libgstreamer1.0-dev, libgstreamer-plugins-base1.0-dev, gir1.2-gst-plugins-bad-1.0 (= 1.18.4-3+deb11u4+apertis1bv2023.0cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-dev_1.18.4-3+deb11u4+apertis1bv2023.0cb1_amd64.deb
Size: 2075360
MD5sum: 1ee4fcb48fa6cad010774e5d7ee982df
SHA1: 05ce56722adc5147bdca4faee9db915bc3b7cc6c
SHA256: 51880831b178fef09e0a8c379085896c182481b1ef4768a194e0dab54c8d7b59
SHA512: 2d7c79ccf332d118b8300563cc2b7f71b12564599e422a813afcbce1c9e92ebfee75b17a9619787608b09345fc79794102680cb7fd95742f28323f46950ecd2c
Description: GStreamer development files for libraries from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains development files for GStreamer libraries from the
"bad" set. The API is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: libjavascriptcoregtk-4.0-18
Priority: optional
Section: libs
Installed-Size: 28200
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libatomic1 (>= 4.8), libc6 (>= 2.29), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.47.1), libicu67 (>= 67.1-1~), libstdc++6 (>= 9.1), libsystemd0, zlib1g (>= 1:1.1.4)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 6626660
MD5sum: e6fd9bb8b10bd40c58989d9f57b7e565
SHA1: fcc9b370ac6a719cb910d77cf74b07539bba383f
SHA256: a66b6863a16285102a37d88199f820800c77043a61004a2487fd6de2def1d0a8
SHA512: 5492ea85e7b876e49fba265300379bc3b71def2870a9fb39a2956d174c14f87fa9f76f1a961c121899dfb249bdb7a5d6f84e6e18be137dc3dc2ab5827e871c45
Description: JavaScript engine library from WebKitGTK
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libjavascriptcoregtk-4.0-18-dbgsym
Priority: optional
Section: debug
Installed-Size: 27424
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 22812828
MD5sum: be3102470192afc5194be472fe357fef
SHA1: d409657c1ff77947a77a74d6fd034227d58566c9
SHA256: 5ee2c38997f7a73d3e3bea672ba440e7607cd9516cbf16e4eab7ba21dbfc4c86
SHA512: 276d7a0336a04bfff8da3ad68821f5e6b368a5c0b849e40d3664ee3a1a4b09fa0f4846723aa6274e4a6167c46a5cf649e76ffd391e2de8c033cf3b3bbb329167
Description: debug symbols for libjavascriptcoregtk-4.0-18
Auto-Built-Package: debug-symbols
Build-Ids: b36053ba8dae9e35ba6c03a2cd9994619bd041c7
Multi-Arch: same
Package: libjavascriptcoregtk-4.0-bin
Priority: optional
Section: interpreters
Installed-Size: 761
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libatomic1 (>= 4.8), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.16.0), libicu67 (>= 67.1-1~), libjavascriptcoregtk-4.0-18, libstdc++6 (>= 4.4.0), libsystemd0, zlib1g (>= 1:1.1.4)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 301560
MD5sum: e1dc7f7e4ed664a50170014b2340e78b
SHA1: f7e468837f4f777452fa61c12a78941647358424
SHA256: fd1465d40cde6ffbea61a33b9b04170d66d60ff3f3aac61f748b509227eafc2e
SHA512: 2a3a41ae4354821a71ff0a9e12dd7cd35ff6b18f4c6cb9b4628a316f2dec146695d65a7c1343e58f895fea26111f394920986929d1452de7ff96ba4ce9478f43
Description: JavaScript engine library from WebKitGTK - command-line interpreter
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package provides jsc, a command-line JavaScript interpreter.
Homepage: https://webkitgtk.org/
Package: libjavascriptcoregtk-4.0-bin-dbgsym
Priority: optional
Section: debug
Installed-Size: 307
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-bin (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 231192
MD5sum: 8b39cdc9b8d35677355a170c34d7afc8
SHA1: 71071d4aaa7b17378a81f1ffdd320ac05f25d53d
SHA256: 849cb09839c8ccf6feda83b0e41acaa4ebdb12b8a48de3f9c90082b0443fbd89
SHA512: 93cc62b76b927d9b154bd077b94b7cb5f467da5e2639aa67e94098160971936ce8ef8f8c660959e4df58ffc4eb55f7984db9b4aebbc4db59e42575c7228987d7
Description: debug symbols for libjavascriptcoregtk-4.0-bin
Auto-Built-Package: debug-symbols
Build-Ids: fa32c1d5ee63c68c11137ca373964a5e8c665204
Package: libjavascriptcoregtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 885
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libglib2.0-dev
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 244160
MD5sum: 21748ec11ffef06b3905bd20cedfe874
SHA1: 9ede70adfc63d4c1714448ffdf3e6f80c0341220
SHA256: 4d5b5c5026a968af568cca869abd89042cb8f865482e41e6ea6d76b994777f86
SHA512: e39c1f3fa1b3cc3d869ffc64178a2887ec643fae4264d36daa42e23b5704f9bb3a30f0351658b15feba12636bf69c933a53aef22043327265354602d0ee3b608
Description: JavaScript engine library from WebKitGTK - development files
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libnghttp2-14
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/n/nghttp2/libnghttp2-14_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 80032
MD5sum: b30e82e5a6ae4d761fdaaf6573021961
SHA1: bd3316b950244b5111fc7762b16698d9fdc86db8
SHA256: 1f0198c8941520f0ba135773ea7e696685819540f147a914dd0975fec4619a3e
SHA512: 869123ac7112c306f74068535c90811c61d92d75a3e086dafcce1683aed4466ea9e8f0b4505910aa08edbb43dbc267df2c7b762d41e3dd3278cc9a80b673cd47
Description: library implementing HTTP/2 protocol (shared library)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs a shared library.
Homepage: https://nghttp2.org/
Multi-Arch: same
Package: libnghttp2-14-dbgsym
Priority: optional
Section: debug
Installed-Size: 245
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/libnghttp2-14-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 215264
MD5sum: 8eee598a4be3b157f78fdec303b95bbb
SHA1: 0945a98d3fe9c50b53c3f550514242543105221a
SHA256: 1737f0170fbf70b1306e10d3a9a697aebb9ad4b13574edf30427274c2dc8cfc9
SHA512: cc4d2e1f0396342366b34834ed6322829a03a01f8c6df3528c79515c4fe8d4e4cb97c647532155fa1e5582a5167bd50babfda86ff603ff91b7546c08c929d95c
Description: debug symbols for libnghttp2-14
Auto-Built-Package: debug-symbols
Build-Ids: abeaaa76e682e40f6352baf690ab2d1af76e09ad
Multi-Arch: same
Package: libnghttp2-dev
Priority: optional
Section: libdevel
Installed-Size: 536
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), pkg-config
Suggests: libnghttp2-doc
Conflicts: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Filename: pool/target/n/nghttp2/libnghttp2-dev_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 116308
MD5sum: c274c3c657ce4cca0f3587523aa82aa2
SHA1: c6746f9e7ec902c4c25b730e3b14cf7b8e762314
SHA256: e9994f92b40adc87e8ca8545407b0b64ba2f35b96e2230d71078d4cf0a733d8b
SHA512: 26791c7633891eb5a16e0a871331ca953c815bbd91e816cf49a2f1534675d4529b854363854602159842abf0178b67d8fdccb186707168fddcece6e9d599c368
Description: library implementing HTTP/2 protocol (development files)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs development files.
Homepage: https://nghttp2.org/
Package: libnghttp2-doc
Priority: optional
Section: doc
Installed-Size: 10333
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libjs-jquery, libjs-underscore, lynx | www-browser
Filename: pool/target/n/nghttp2/libnghttp2-doc_1.43.0-1+deb11u1+apertis0bv2023.0cb1_all.deb
Size: 2956896
MD5sum: 3b2b04c2ce21355a378a07fb62846bef
SHA1: 45830e16d0c82013e34514466de326f7e0b4c9c5
SHA256: 5c0d51bce0d30cda1616238f831625daecb12f5d4173e925944c86ee4335e48f
SHA512: 9f5463c6f6cd3cb59fdc0d2f78c2ee0290e2c8995ab33b80ead6befc519032f395e086cb86cc6d6b0a3e64492f3bee551e8c507a38329d4b2869d5502f6d144b
Description: library implementing HTTP/2 protocol (documentation)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs documentation.
Homepage: https://nghttp2.org/
Package: libtiff-dev
Priority: optional
Section: libdevel
Installed-Size: 1199
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1), libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1), zlib1g-dev, libdeflate-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Filename: pool/target/t/tiff/libtiff-dev_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 418272
MD5sum: daadfc35ba9dc067e04cc348db00b464
SHA1: d48088bcf2ccd4f4204f1871c022c66e51866635
SHA256: 3ccbc9ecacbdb1a95dbed5eded83066dd8b23f39feaa3be51c4ff744c4011ae1
SHA512: 90bdb6b1a8842e3e7632934cc0177d31356656c54c3c3d7e95e4befe4c534c0d586f1946f0995174f637f0bec4fcadee3752594efef98e5f2cba02715c592851
Description: Tag Image File Format library (TIFF), development files
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same
Package: libtiff-doc
Priority: optional
Section: doc
Installed-Size: 1324
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: all
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Filename: pool/target/t/tiff/libtiff-doc_4.2.0-1+deb11u5+apertis0bv2023.0cb1_all.deb
Size: 439204
MD5sum: 3ed2761cb0fa0b68c12d509167c61d62
SHA1: 854674936041563153cfa72c72bd3b8e587c9006
SHA256: f1d79b19f14c16b81a4568ac82532d390509a5952d74b97b9bc2aaa630e801ce
SHA512: c20a960b55e3ae8ce4e46abd452268c2497c25b5be164534cf950a7e72046082534db022a2acf86863336d52040a7e93db8a5ab24dc70703284fd49b08699f64
Description: TIFF manipulation and conversion documentation
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
contains documentation.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign
Package: libtiff-opengl
Priority: optional
Section: graphics
Installed-Size: 161
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: freeglut3 (>= 2.8.1), libc6 (>= 2.3.4), libgl1, libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiff-opengl_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 135904
MD5sum: f2c3b1b00413964d09795e43f5743588
SHA1: b4a816402b4edc4f2fdf1efc557b606037fd2f19
SHA256: 10a9ad0386c7117fe4569a7385f46b8aecc058b8ca77821a2ba8fb4ac75d26c1
SHA512: 7b1b2e8fd131877e916dbf7a41b134157b1a09ab3ade8f3a45cdef7f81a7e6ec05847a385453ae5d28a100f5d9742582292fb5713155a80a89abd153056b38f8
Description: TIFF manipulation and conversion tools
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
contains libtiff tools that depend upon opengl. It complements the
libtiff-tools package, which contains the libtiff tools that don't
depend upon opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign
Package: libtiff-opengl-dbgsym
Priority: optional
Section: debug
Installed-Size: 30
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-opengl (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff-opengl-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 14632
MD5sum: 14d8f3816f649fbdb7b47a57b1ef0356
SHA1: 140acefb2ce173af0cbe206d633ddcd887db2ccc
SHA256: d914d31d256f3e74c1790c7cba7083e611893134f2657c20ebe350f1437e006d
SHA512: fc92ef962281f38e2f101406a02f0dabb696b614532fa2b6a07a185259fad43ff1df5b5215fa432e3585e3ee9d27f48e303eaae958686f6c0b48e62434f72430
Description: debug symbols for libtiff-opengl
Auto-Built-Package: debug-symbols
Build-Ids: 405c490da16d6e135e542b243e0dfaa4653eb863
Package: libtiff-tools
Priority: optional
Section: graphics
Installed-Size: 770
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.14), libtiff5 (>= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Suggests: libtiff-opengl
Filename: pool/target/t/tiff/libtiff-tools_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 325716
MD5sum: 79eb0d9655213e740a1d6404a7c12ad3
SHA1: 2b3b74523bb1f5e0c03dc15677d5e3f749ebc4e0
SHA256: a2d10554ee6ceab2fb4e4f0f4564ed2d608d4c550a509ebe532eb112a8e0d63b
SHA512: c291b347b58193271c178800733403b3e49c29caf094926efb90c2154a5377592b42d7d3fae49bf39979cbfa4f1e5c81444e7fbe6e23a051fe68ab48cd9a4f07
Description: TIFF manipulation and conversion tools
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes tools for converting TIFF images to and from other formats
and tools for doing simple manipulations of TIFF images. See also
libtiff-opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign
Package: libtiff-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 588
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-tools (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff-tools-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 425420
MD5sum: 4d274e8978ffae79f243a9a2716573d9
SHA1: d36317a6e2e77affe53839fa7132db33ccc4a2ac
SHA256: 2ade38aafa478134fb79433077bc389f6ff632a92915c9bda4719dae4fed83ef
SHA512: 64d934d44369bc8773116b4318861959cbab8396f67eb3baf9a6ed70cde4a7a7b4e79fd2632d9caae5b1ebcc8c6db73c6baebdd5bd021623aba74d26205f077b
Description: debug symbols for libtiff-tools
Auto-Built-Package: debug-symbols
Build-Ids: 08e8b98d114a97fca4c7e2cae279a964ca89968e 22202e26089b719e2917981551094c9dbd9f0171 3470cf6bb8e581e1bd2907c6740b5504b9d46f0f 3751a0a0a8921d339bf9f16026c36dc7c03b1038 5ab4709b9cf4315c11ac8f66fdc0b5b38dcabfd1 62bcc917be2c0c72fe796880ee088b83b87dfccc 7de33990bd1185438ee777aa5919366688fa0395 7ee0f02ba4a185a0ecab3cc078ac933b06d1fd82 849587e178ccacc9c556694af8696fddf1209825 8fade150f604e7269ffd238895ec21616a6d5730 9a1e835fa54abe318d4bb273d0deb3e6e02724c7 bbc799596116358ac26063077caf32ea7ee407f3 bc09ac4214ec1cd8bfa2dcc2cbbc0937444c2efa e1416e99007a2c5a00fdd1c06a6d891d22596780 e193f46fb25d90e5a504621bee7a52d69a8d1734 e49b0dad1a894ab08fef8d19f03a4c9b449eeda9 edf35076b0802cc91a4296240dc0b36c16d20854 fe8ae661f27a0e591ca78d5f4ce544705e799317
Package: libtiff5
Priority: optional
Section: libs
Installed-Size: 683
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.29), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), libwebp6 (>= 0.5.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/t/tiff/libtiff5_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 292712
MD5sum: 7e66d206cace452e66ca11a85ad350db
SHA1: 6fbbf2f2bcf29b6799a7b3a9bc8cc6d34db344ea
SHA256: 635b68e287892cffbc595a262d7dcc0dba217a5b979482315dc23782e818e744
SHA512: 19528a45141c970a178b51ac21a0b99a16746bb73053e0d193994d373dccc68b8430b824bb5f5f1729d8f91a945c919dfe80d89a2f9d7fd9e0f15ff42843d26f
Description: Tag Image File Format (TIFF) library
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same
Package: libtiff5-dbgsym
Priority: optional
Section: debug
Installed-Size: 479
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff5-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 442312
MD5sum: 41d5ff0ec5492a4e7a39f12ed9ba9971
SHA1: a3fb33c6132ead797cdcad330e656ed7f5704241
SHA256: 0234329f180854249a386b1c6f5d91f0428570ebb095dd4afa6abbd86898f7fc
SHA512: 4b3b792aba81876bde817f2bcfca0f1b90811eb9221610e0eef8041dec6a011fd702169e5baafc5bf33a804d8bba75cfcb22ac71115a5087e1301d475755162c
Description: debug symbols for libtiff5
Auto-Built-Package: debug-symbols
Build-Ids: 2594bd54f2efdae7b88d565e054e4ae4723bc954
Multi-Arch: same
Package: libtiff5-dev
Priority: optional
Section: oldlibs
Installed-Size: 131
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-dev (>= 4.0.10-1)
Recommends: pkg-config
Filename: pool/target/t/tiff/libtiff5-dev_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 127500
MD5sum: 36d05717f36b8674d5712f7c49d0fe60
SHA1: ffe47fc7c63e7e6ffcb475e9d301fc9d31d43768
SHA256: 87cbea34c8f3ebb3f3b1ce64533a16ab0619c99c49d90425245836602f3bf139
SHA512: 45885aeb40faadb95490e34a0878d08e330c0eebe3fa0dad8ac032679aca07c2e8575ec558f5d537115e5a8104ea96f774cf53b7daf89e59b70387bc44dbb4b1
Description: Tag Image File Format library (TIFF), development files (transitional package)
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the development files, static library, and header files.
.
This is a transitional package. It can safely be removed.
Homepage: https://libtiff.gitlab.io/libtiff/
Package: libtiffxx5
Priority: optional
Section: libs
Installed-Size: 152
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.4), libstdc++6 (>= 5), libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiffxx5_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 130980
MD5sum: 9375256c9d82d5e641dde6c1ad506d67
SHA1: 6bf583df3db0b051fc48144dff41960ffb403f09
SHA256: df1e207cf474701d6d79e8de805323bd4feb43273c68346745e1f7b5e9f455cb
SHA512: 7f401e29366e70949eb5e95e3ae1897495b2c3041221b880d0f60fd2c1b30d3f7b8d6a2acee86360d4aa2b9b23c8a2bf1a80bf9adbdf0623796c7275775eb15f
Description: Tag Image File Format (TIFF) library -- C++ interface
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same
Package: libtiffxx5-dbgsym
Priority: optional
Section: debug
Installed-Size: 36
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiffxx5-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_amd64.deb
Size: 21672
MD5sum: fd2e9c120feae109d2661dd1c94f81d7
SHA1: 43d6d6135a5ffa1596733c49f52e154ffa033db6
SHA256: 8cf955d171b07e4216ab250800e7fee8aeff95e469079fdc511691ab74965a15
SHA512: 2c5d8a22ee5bf0c8c0d2a16c22a5c08d9f7b152e325f21046fdd428e595e3f5d22c132d38de16cc6ed63877713c1f320f7fb0d986ab876cedd4942cfc633f337
Description: debug symbols for libtiffxx5
Auto-Built-Package: debug-symbols
Build-Ids: 464879e5001912a296ecbefef282b0906393f27b
Multi-Arch: same
Package: libwebkit2gtk-4.0-37
Priority: optional
Section: libs
Installed-Size: 72416
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, libgles2, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 1.32.0), libatomic1 (>= 4.8), libc6 (>= 2.30), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.15.12), libepoxy0 (>= 1.3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.8.0), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.61.2), libgpg-error0 (>= 1.14), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.16.0), libgstreamer1.0-0 (>= 1.18.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.9), libharfbuzz0b (>= 1.4.2), libhyphen0 (>= 2.7.1), libicu67 (>= 67.1-1~), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libopenjp2-7 (>= 2.2.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.69.90), libsqlite3-0 (>= 3.7.15), libstdc++6 (>= 9), libsystemd0, libtasn1-6 (>= 4.14), libwayland-client0 (>= 1.9.91), libwayland-egl1 (>= 1.15.0), libwayland-server0 (>= 1.3.92), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwoff1 (>= 1.0.0), libwpe-1.0-1 (>= 1.3.0), libwpebackend-fdo-1.0-1 (>= 1.8.0), libx11-6, libxcomposite1 (>= 1:0.4.5), libxdamage1 (>= 1:1.1), libxml2 (>= 2.7.4), libxrender1, libxslt1.1 (>= 1.1.25), libxt6, zlib1g (>= 1:1.2.2)
Recommends: gstreamer1.0-gl, libgl1-mesa-dri, xdg-desktop-portal-gtk, gstreamer1.0-libav, gstreamer1.0-plugins-bad
Suggests: gstreamer1.0-alsa
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 18398280
MD5sum: 019f1b4a0c76276e26c6aa3ee6f53ae7
SHA1: cf2aee3e823d7d238f10f2b17472f989c848397e
SHA256: b57ef064edc44c71a131fa4c74a5dae4f3d3ff0ca3a106b7e3197ddaaab90c80
SHA512: 77959c968e7ae3b97906e091c5ee2a5b0fad0d6d14537062864807be723cc2ab81dfd198c60ef0f1ee432357c8cddeadc22611af172dd874d687bf7dac6ad1f6
Description: Web content engine library for GTK
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
This build provides version 4.0 of the API and uses libsoup v2 for
the networking stack and the GTK 3 widget toolkit.
.
This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libwebkit2gtk-4.0-37-dbgsym
Priority: optional
Section: debug
Installed-Size: 91392
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 67945784
MD5sum: f5f86a6d21b4edd4ddcfceff3d33040c
SHA1: aaec91c38d6478b0f987aa3246ebd96165263c1f
SHA256: 9f26904135908b0e7581d06057fe8fceea0933e5e5d74152c78d23440349d4e6
SHA512: f6f99122062b0986d5caa72440c1832c47445b172862900a9404500e5079dab4154058ff423f1f4532a43a34c1cb8c4deefcadb46c49101ab87e6680decefcf7
Description: debug symbols for libwebkit2gtk-4.0-37
Auto-Built-Package: debug-symbols
Build-Ids: 49a66728a85ad148089aafeb04bac2a1812180e8 6b7ed73465e59febec3db015a7cc9626f1b14cd5 70333c33ec70b9c65f24727b66f9788e01f5b2b9 a081667ecaaec3de656f045e95c221b2068e9212 cbb2474cf6eae25b5e7ad35248e22af9afa24333
Multi-Arch: same
Package: libwebkit2gtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 5588
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gir1.2-webkit2-4.0 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libgtk-3-dev, libsoup2.4-dev, libjavascriptcoregtk-4.0-dev (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 461500
MD5sum: 4e21285aa15c03b39c73e02d6af259fa
SHA1: f7573d5b60e546347a19e07e2e2f6e269bb66fa8
SHA256: 96291ef2d714d13dd54c52b8c0d2412fb89d79cfe50de1249df0fec587a12041
SHA512: c3334aedda1e66e342b40d42f1cb220ef48a7d7b84dc149acd28cbd216410e51dc689ed955d0e06a2036ec09a73010dbc89811b994f79fa3b10e1eea61f1ca67
Description: Web content engine library for GTK - development files
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
This build provides version 4.0 of the API and uses libsoup v2 for
the networking stack and the GTK 3 widget toolkit.
.
This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libwebkit2gtk-4.0-doc
Priority: optional
Section: doc
Installed-Size: 35746
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: all
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Suggests: devhelp
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-doc_2.42.4-1~deb11u1+apertis1bv2023.0cb1_all.deb
Size: 1069820
MD5sum: 47290fb6e624b39547fdb6497d2b8fb4
SHA1: c96a137cef17b7ce44da25f125c4862a0f136683
SHA256: c8f865eb83173e77e8e1c0b2e388941b7407fa9b3a71bf448d0562f6dadeb6c6
SHA512: ec2fc626844274e9fdcd579fc71cfd69b508d9493c3e8170b1962b7b4d9b57a056f21addcc4ab0fb351475e25d0954f3fd1a7a64082a342fc9c5472ccb4996e8
Description: Web content engine library for GTK - documentation
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
.
This package contains the documentation and is valid for versions 4.0,
4.1 and 6.0 of the API.
Homepage: https://webkitgtk.org/
Multi-Arch: foreign
Package: nghttp2
Priority: optional
Section: httpd
Installed-Size: 34
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-client (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), nghttp2-proxy (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), nghttp2-server (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2_1.43.0-1+deb11u1+apertis0bv2023.0cb1_all.deb
Size: 17280
MD5sum: ce1e04fca9df87c3e7af2358ae6e0a37
SHA1: 09abc4f938d97e139a9a4772559edc7399d09102
SHA256: 8b5b17e550fd75b26ca9c5246d746a2e25765a54ea822fde6501976e550b8032
SHA512: f9f991167e05529ebe169a8f84824f62eb2c26bcad2e9ab27e623e0780f357cbc610654175ff5b64ad2274ce95d8cc59b27a129e48bb9bfc62ae7089fb137988
Description: server, proxy and client implementing HTTP/2
This package will install a set of programs implementing the HTTP/2
protocol: a standalone server (nghttp2-server), a reverse proxy
(nghttp2-proxy) and a client (nghttp2-client). It provides no files
on its own and is not necessary for these programs to work.
Homepage: https://nghttp2.org/
Package: nghttp2-client
Priority: optional
Section: httpd
Installed-Size: 549
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, libc6 (>= 2.14), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjansson4 (>= 2.0.1), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 7), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-client_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 168716
MD5sum: 1c4c1d77715a3f4a0b99902fc860213a
SHA1: 1680bb1e5efd435ec37e8e09e78d82da734d9fc2
SHA256: a73d6e354f4d88b5e1d617f32fbc29379a7ae6543f47e3b9f49656ee0a463568
SHA512: f1348266ddad5ceeea0f684b136b7a4e4e44c1889f8997f55a4e4a0b7ed5c50eff1a5243f9c9b2967024fe552c0dbddfe637e9cd74a8010c3b97a6a40ef7bb76
Description: client implementing HTTP/2 protocol
This is a command line client implementing the HTTP/2 protocol. It
gives access to many low-level and advanced aspects of the protocol
and therefore is useful for debugging.
Homepage: https://nghttp2.org/
Multi-Arch: foreign
Package: nghttp2-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 1984
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-client (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-client-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 1879040
MD5sum: 04e481472e0d014fdf9ecbce43775f78
SHA1: ea2823cb02d2c68641c941f8bb6160fe4f8facf6
SHA256: 46c052308c860249b802755f94e3c729dab54e0d6e47d3a9cc4c0473bd6f1c7d
SHA512: 7e5c7c6d9bba5a56b51afc7df16133a3e44e5c778f29e907ca5bd0cf5a9509633663f29c585dcbb979d7402b3a95defbba688cf35dfbe43dc5b0ef4815a94ab2
Description: debug symbols for nghttp2-client
Auto-Built-Package: debug-symbols
Build-Ids: 8fe7f0d4f3c398fa113daac5989e913ce41abb6e 9c4a56692ec30152158db194babe582a9d3241b8
Package: nghttp2-proxy
Priority: optional
Section: httpd
Installed-Size: 1100
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, openssl, python3, libc-ares2 (>= 1.7.0), libc6 (>= 2.14), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.1), libstdc++6 (>= 7), libsystemd0, zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-proxy_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 391520
MD5sum: 89c9bb75c57a324e1edba3c1ffbd8ce8
SHA1: 524a0b5189dc15366c11b2f8ff6aeb62804f4fe3
SHA256: 8f46e79bd2d20e012a60d41b2027a11fdfee1eb9d4531f69cc0e23701fce2834
SHA512: 8af21ec519df681ebc8adefec8e927363bab9b33033e3a0644a5a366767402d65a8f328cf8f2251d497624eb19b881bdad8bd255418c51b5ddc1a85c5eacb5f6
Description: reverse proxy implementing HTTP/2 protocol
This is a standalone server implementing the HTTP/2 protocol with
HTTP/1.1 fallback for clients that do not support it. It can be used
as a frontend in front of web servers that do not support HTTP/2.
Homepage: https://nghttp2.org/
Multi-Arch: foreign
Package: nghttp2-proxy-dbgsym
Priority: optional
Section: debug
Installed-Size: 5410
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-proxy (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-proxy-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 5280304
MD5sum: ae3a8099e50eb923ec61e37f8b02e213
SHA1: 70b1ee4bab6ffb1a98c3cedf43bc0e76085bfb55
SHA256: 57d0974ead8b228114cbcf9a32f062d17493feb08827111b78729fcbfa9d6b24
SHA512: da3f0725eb6fa95021ee0a3b87c268709a004b87c81c9d7ae16382a188132d5e0f336a5c39d8faf35b7932c19b5701304216ed9b2143e9e5ebe803fe87248ccf
Description: debug symbols for nghttp2-proxy
Auto-Built-Package: debug-symbols
Build-Ids: 9dc64feae01940fb37a9c80ff2b519d3fdf6004c
Package: nghttp2-server
Priority: optional
Section: httpd
Installed-Size: 261
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, libc6 (>= 2.14), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-server_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 101804
MD5sum: a5d6b6d5b5fb8c6d01fbe2a0f03afea8
SHA1: 4f343644c4baa4d6f68788f760cb6ed270248a30
SHA256: f7b722c905aeda948c2198391077b813f9599156fb74ffe2a5787f64fb172fab
SHA512: 5cf55956aa5cd68cb29d5cf026de8e1a7dbf500dd684d83cd777916c4a0690b3374abae51bfbb78425da04dc551b3af539108bbf225a15a289d8bbd1f951b196
Description: server implementing HTTP/2 protocol
This is a standalone server implementing the HTTP/2 protocol with
HTTP/1.1 fallback for clients that do not support it. It can be used
to serve files from a local directory.
Homepage: https://nghttp2.org/
Multi-Arch: foreign
Package: nghttp2-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 987
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-server (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-server-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_amd64.deb
Size: 946220
MD5sum: a0901c50e714c2691fb53491b21d65d2
SHA1: 4a2d97e488f914a076b05477165196d6c13e9a24
SHA256: c8b4db7931f1fee2ed77faa07a7234e2f881e448f56f6b539054837b8a599ff6
SHA512: 142fe5f4f9e25eb4a455db04b092827f398c3ea0b84cfe93485bb56ce4cfe2d186753c5d442ae844b008aff05622d9d01e5eb599d9e5fb51db8b89ac9084a912
Description: debug symbols for nghttp2-server
Auto-Built-Package: debug-symbols
Build-Ids: f9d4a2718d89b8e4411d03d4ef786db1826bc011
Package: openssh-client
Priority: standard
Section: net
Installed-Size: 4336
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.26), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Breaks: openssh-sk-helper
Filename: pool/target/o/openssh/openssh-client_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 933900
MD5sum: c3681f99c5556b1f4e7d57f4a487c39e
SHA1: b6ea89b2639892d182dbe094a43b3830630b9992
SHA256: 7497fb276678d906596910be9068bf6360c5c238fc78ce2834be66f410235670
SHA512: 7acd0409c6fc1aa129857f02ac621d9e9da949749d26fbf19c834ccac68bdb19bd212ad36cf8ba60853e3bd42b951354dc60a077dc605eef90da8132f1db0673
Description: secure shell (SSH) client, for secure access to remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the ssh, scp and sftp clients, the ssh-agent
and ssh-add programs to make public key authentication more convenient,
and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
ssh replaces the insecure rsh, rcp and rlogin programs, which are
obsolete for most purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 4311
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-client-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 3947020
MD5sum: 53a784677021bb305e2d2f6d37164ebb
SHA1: fa6125db84826c35a353cdf0507db56524d21797
SHA256: 42a5b2bdbb8f286c08d6a1753002ea567e02dcb78e5cc57a2bd468a06f2b1072
SHA512: 1dd197c59f20b40cbc2e904dc45791479125f9218c3d7b99616e5af88d9e0962b71dcf3ba9222251060f842dd0bc84350027614c27712ada3d97cd166097c47e
Description: debug symbols for openssh-client
Auto-Built-Package: debug-symbols
Build-Ids: 3aa9634f53dbded863fe7f0188ef207e1ac61b3c 4de0a3960e2fa4daed36fefddf362603883af93f 69a60d30fcd87c2f56eb0cb2fe19150b1528fc0f 79524edaebbe6d1eb21b46050f93072bbdd8d70d 959e593cf068190db9a4d4635ed723c2d7aa2baf a0a882066aef8ba7119ad782686598df2ef94e73 b361fe0436bfd655fdaab1413d6cbe3630c5a01e bde1cb2f043f79a0adf2712d1bfa3df07f24ed08 dd23df198c61a05b85c47dfde08ccb48af46146f f1b49482b1a12efd803f640771c3d980d571644f
Package: openssh-server
Priority: optional
Section: net
Installed-Size: 1557
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.26), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), libsystemd0, zlib1g (>= 1:1.1.4)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Filename: pool/target/o/openssh/openssh-server_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 386176
MD5sum: e1a75632c5984ec33cc4e97dd5ef8d09
SHA1: f7617216a7211bace42eccda2a4fd6c559c25e6b
SHA256: 82ae23c7acb486ae48edb91d815016d316f5e2573b9c803c913def843000fec2
SHA512: 61f0aac69cf2a861dead4fa7d2888aa3be2651b1e8f9e2fa8e2a24cdeb833514b871e44efb6cac496993ee8656e97a703daf3c0a5e4d21708abe05b583bb0ea1
Description: secure shell (SSH) server, for secure access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the sshd server.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
sshd replaces the insecure rshd program, which is obsolete for most
purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 1126
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 1050312
MD5sum: c4e884968fce6dff8777935f274df4a0
SHA1: 5e19bde0d73a6aa0d64411c3dfee47ac4d807de3
SHA256: 7f65a0cf7cf62817e601d7e96968f06fc91d1841307b991e03522fbf59ca4a32
SHA512: c58e320f817dba017548ec24f96dad6d7767648dfb58c0d32b7a4178fe433baa48e19a5eec30af741080cd1389a0c1f78a8b7e60094c1b8d4250bd03ff97390e
Description: debug symbols for openssh-server
Auto-Built-Package: debug-symbols
Build-Ids: 231f56f656fe21c407773109e2670d68f4614a1d
Package: openssh-sftp-server
Priority: optional
Section: net
Installed-Size: 145
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), libc6 (>= 2.26), libssl1.1 (>= 1.1.0)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Filename: pool/target/o/openssh/openssh-sftp-server_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 53308
MD5sum: 78f993ec53553f3d5f74d0847d52aa92
SHA1: 88e789f14e34b8a1185b8aa3b7f62b2eccc5ed2e
SHA256: 124152c061127232cd2caa4c0c23448b07d325cbff2de17dcd790cdbf5290d50
SHA512: 5bc2889929958af47beaaaa51ed016919d1f4b79ab93242b1eea9d5dc4463a2d07804c2feef6e7d3f72ca6e1a7b6d6e5cf70d53348338fef8309cccfe99d81a4
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the SFTP server module for the SSH server. It
is needed if you want to access your SSH server with SFTP. The SFTP
server module also works with other SSH daemons like dropbear.
.
OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
protocol described in:
.
http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
.
Newer versions of the draft will not be supported, though some features
are individually implemented as extensions.
Enhances: openssh-server, ssh-server
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-sftp-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 190
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-sftp-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 164424
MD5sum: 6f00d2956ed06d7f0f34c6ca64773187
SHA1: 7397abcd4ecb20b981ad02dfc600760274b8501b
SHA256: eaf0252d74a4030c93f9dd9dd08ea1f83a48af2c928db8e55ee4c1ce27b245f4
SHA512: 533bfd46e38bb18288c6596e53ea0c65b140ebeb0a1ed166a4b399e4244fdbe71b8debda3069f9483c054d48ebe428adc7dda97ef1fb4a980de114e850511600
Description: debug symbols for openssh-sftp-server
Auto-Built-Package: debug-symbols
Build-Ids: dbeb20f711b2937a581e6ad1c9ba1002e70f6c9e
Package: openssh-tests
Priority: optional
Section: net
Installed-Size: 5626
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssl, putty-tools (>= 0.67-2), python3-twisted, libc6 (>= 2.26), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/o/openssh/openssh-tests_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 974144
MD5sum: 2482b4ce21020ec128e10c2e93a5aa8e
SHA1: c644ebfb15237593c5ac141b1cdade9ab21a5dce
SHA256: e0acb579a23a734054349b9cfd87922f876f5951ff2dbc49ba6d51222b37c9dd
SHA512: d669d5cc4796b0a99d4e7355209a2164da6e0bf66562f39e94b144164063d426960183e93a2e23695dbf250924042ed34f5a32d7c411ad0b69681813f795738f
Description: OpenSSH regression tests
This package provides OpenSSH's regression test suite. It is mainly
intended for use with the autopkgtest system, though can also be run
directly using /usr/lib/openssh/regress/run-tests.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-tests-dbgsym
Priority: optional
Section: debug
Installed-Size: 3073
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-tests (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-tests-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 2712168
MD5sum: 8833baafef066acc56ac6e616c56fee0
SHA1: c2ae8cb468ea553c2ce6934ac0396bffa30d1783
SHA256: c561aa83e708b69b4b7ff54756697e3a1cf63502167b509f6970ffbc34abcbe7
SHA512: 7c0da92b312d73e6d0a0563ace5df116d83cdf5f1969613d9ca45781d246eeb0f885c19b9486fa402d995c78cd3120b30ad177ed46a663911383264890f24cc7
Description: debug symbols for openssh-tests
Auto-Built-Package: debug-symbols
Build-Ids: 0d23ac22851683cb25208c9b9542ddb161d70a82 137d69ef25fcb291a9f340b1cb2252eb20d587f6 24db6559eed5c017cd08001e758cf4df86f16a3f 2cdb70be250c7084698420fbf02fddd95b529b97 4a5325fd090b1dbd05334b099cd10ef5395fe1db 83cacc2832284423fb82b5fdc8b799c692434607 9fd14b8bd782a55614f7bcc8c55ea6a6f8f08f06 aa874e8bf674502a194a07989bd96048f753b0f7 b1a2fd8c6174744d2909e4bd31669269ab622d75 b29267a44aa1c1563158db7de912f21dcdbac252 beebd018f1ec74d8c20fd2f3505cbf45d90b2018 cd67f0a070af570ac85440c9e4807b3716eea4fc d252878bf993b7f85f7d5a3af8f5912a38c91e3c ee3e57b9ab66a5cba2213ffa1047b1de017aeccd f72678411627214df782ecaf28f2b95714e62fb3 fa2a80cb52a711462423a97233d9d9f60a3bc22e
Package: runc
Priority: optional
Section: admin
Installed-Size: 8225
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: amd64
Version: 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1
Depends: libc6 (>= 2.14), libseccomp2 (>= 2.4.1)
Recommends: criu
Breaks: docker.io (<= 1.13.1~ds1-2)
Filename: pool/target/r/runc/runc_1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1_amd64.deb
Size: 2432184
MD5sum: dd8a80dc0bf6b2590c00f64f180a9810
SHA1: 8d2814097bbc59e394ac35d2bddc6e761cc7b20a
SHA256: c3af1d851b79b1cca280d31608cffacb6137eb4b1006af3962cf7e999660b44e
SHA512: d3f0c7a7d46b18337247cb51dc8947c1e598004c028c9db9a6f6b2b75cfa24366d41d4141c2b60fdaed75656c12c791d947a32d9063bc41a1b19bd99a6c22dae
Description: Open Container Project - runtime
"runc" is a command line client for running applications packaged according
to the Open Container Format (OCF) and is a compliant implementation of
the Open Container Project specification.
Built-Using: go-md2man-v2 (= 2.0.0+ds-5apertis0bv2023dev2b3), golang-1.15 (= 1.15.15-1~deb11u4+apertis0bv2023dev3b4), golang-blackfriday-v2 (= 2.0.1-3apertis0bv2023dev2b4), golang-dbus (= 5.0.3-2apertis0bv2023dev2b4), golang-github-checkpoint-restore-go-criu (= 4.1.0-3apertis0bv2023dev2b3), golang-github-cilium-ebpf (= 0.2.0-1apertis0bv2023dev2b3), golang-github-containerd-console (= 1.0.1-2+apertis0bv2023dev2b3), golang-github-coreos-go-systemd (= 22.1.0-3apertis0bv2023dev2b3), golang-github-cyphar-filepath-securejoin (= 0.2.2-2apertis0bv2023dev2b3), golang-github-docker-go-units (= 0.4.0-3apertis0bv2023dev2b3), golang-github-moby-sys (= 0.0~git20201113.5a29239-1apertis0bv2023dev2b3), golang-github-mrunalp-fileutils (= 0.5.0-1apertis0bv2023dev2b3), golang-github-opencontainers-selinux (= 1.8.0-1apertis0bv2023dev2b3), golang-github-opencontainers-specs (= 1.0.2.41.g7413a7f-1+deb11u1+apertis0bv2023dev2b1), golang-github-pkg-errors (= 0.9.1-1apertis0bv2023dev2b3), golang-github-shurcool-sanitized-anchor-name (= 1.0.0-1apertis0bv2023dev2b3), golang-github-vishvananda-netlink (= 1.1.0-2apertis0bv2023dev2b3), golang-github-vishvananda-netns (= 0.0~git20200728.db3c7e5-1apertis0bv2023dev2b3), golang-github-willf-bitset (= 1.1.11-1apertis0bv2023dev2b3), golang-gocapability-dev (= 0.0+git20200815.42c35b4-1apertis0bv2023dev2b3), golang-golang-x-sys (= 0.0~git20210124.22da62e-1apertis0bv2023dev2b3), golang-goprotobuf (= 1.3.4-2apertis0bv2023dev2b3), golang-logrus (= 1.7.0-2apertis0bv2023dev2b3)
Homepage: https://github.com/opencontainers/runc
Package: runc-dbgsym
Priority: optional
Section: debug
Installed-Size: 3276
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: amd64
Source: runc
Version: 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1
Depends: runc (= 1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1)
Filename: pool/target/r/runc/runc-dbgsym_1.0.0~rc93+ds1-5+deb11u3+apertis0bv2023.0cb1_amd64.deb
Size: 2504664
MD5sum: bbeb7f4d302b5e05258b65f3db0c1ae3
SHA1: 3c93264c6d0dc6ff24cfc5759e4ad271e3c67228
SHA256: 2ec31f977896c2d8b72afd09d5ffe45999df4c922cb8234d0e7c6252e80d4eaa
SHA512: 177f07e63c66499b9646f85914a1baac8722fd11b9d77fe558ff51de8109fa844dc6796072b0a0337935580d21cb768e47c7aac447d73dd7162c236af3b1f053
Description: debug symbols for runc
Auto-Built-Package: debug-symbols
Build-Ids: 274bde543318aa2c4e2d7d0728c1070ff68d7e9a
Package: ssh
Priority: optional
Section: net
Installed-Size: 270
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (>= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-server (>= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Pre-Depends: dpkg (>= 1.17.5)
Filename: pool/target/o/openssh/ssh_8.4p1-5+deb11u3+apertis1bv2023.0cb1_all.deb
Size: 259448
MD5sum: eac6ed65b4214e84a6a8ceb62a30f378
SHA1: 998a5235ce3c9e7046f36a977ec7952114e673bb
SHA256: 3bbbca7ee560cc04b016ca839fb188ea1cad689e7d0f40638faa654bcf7df9af
SHA512: e575e1c2f07d73fb2d626eb76a5d52543168264b0a034e45ab9b5e5f023bf5ee14d8400bdde83c8547532fe363db2e968100b6de84bbe9f81b5583e8c7b5702e
Description: secure shell client and server (metapackage)
This metapackage is a convenient way to install both the OpenSSH client
and the OpenSSH server. It provides nothing in and of itself, so you
may remove it if nothing depends on it.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: ssh-askpass-gnome
Priority: optional
Section: gnome
Installed-Size: 303
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: ssh (<< 1:3.5p1-3)
Provides: ssh-askpass
Depends: openssh-client | ssh (>= 1:1.2pre7-4), libc6 (>= 2.4), libglib2.0-0 (>= 2.12.0), libgtk-3-0 (>= 3.0.0), libx11-6
Filename: pool/target/o/openssh/ssh-askpass-gnome_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 272840
MD5sum: 782b275dc505ee1836bd7e9d437c5566
SHA1: daae0bff15214b90f85568bae41a3cb406f9eb15
SHA256: cc69ff16a0698e99d4a7152d9f47f455b409d3a27966129232c74b85e59b7705
SHA512: 19525b44e7531f16d5dc4d6da0fa7f5a4536c5ebd65ec41b5c2841d1f3125b1059a90c8047e89ef69080648c92fb2480a33e676104bb80548fc9ac5d62ac1700
Description: interactive X program to prompt users for a passphrase for ssh-add
This has been split out of the main openssh-client package so that
openssh-client does not need to depend on GTK+.
.
You probably want the ssh-askpass package instead, but this is
provided to add to your choice and/or confusion.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: ssh-askpass-gnome-dbgsym
Priority: optional
Section: debug
Installed-Size: 28
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: ssh-askpass-gnome (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/ssh-askpass-gnome-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_amd64.deb
Size: 12928
MD5sum: 4a4459869f31947b0d0d63d6982fac30
SHA1: cc4e4a34a76d58618f7aaf7255ecfcd996026fbe
SHA256: 7f2b1fc967411d67a08e920ded0aa8a7cb7e5ebc70124abc5acc8dc0747624de
SHA512: 6182169b2c9b5dfb9774ae2acdc06849b69401d4b39dbf5cd95c04eb812f61c7d3fc06716fcdb75ae4839f35124a3bc7b361bd4258d64478f35a4e7a54668db2
Description: debug symbols for ssh-askpass-gnome
Auto-Built-Package: debug-symbols
Build-Ids: a6d3af11f340681af6abc8132297ff16ad7c4c44
Package: webkit2gtk-driver
Priority: optional
Section: web
Installed-Size: 2230
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libatomic1 (>= 4.8), libc6 (>= 2.29), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.39.90), libicu67 (>= 67.1-1~), libsoup2.4-1 (>= 2.47.4), libstdc++6 (>= 9.1), libsystemd0, zlib1g (>= 1:1.1.4)
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 767132
MD5sum: d77dbc7aabac49b0b44d4678e520c7ef
SHA1: e898da5ccad0f225490ccab99eed0f8a52f3f026
SHA256: 3070f0345f75e610fa81a2f05785300855275a42d331f95e0bdcb83e9a5245ed
SHA512: 699591540d881790b793b6c26aede514460fc80a7f6a93d79a67841e6b81a4a3fdcba769e1936d9544218c1f3a91b0fb49e549402a65e6a5f9633d958bc92729
Description: WebKitGTK WebDriver support
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
.
This package provides the WebDriver service implementation for
WebKitGTK.
Homepage: https://webkitgtk.org/
Package: webkit2gtk-driver-dbgsym
Priority: optional
Section: debug
Installed-Size: 1837
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: webkit2gtk-driver (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_amd64.deb
Size: 1444684
MD5sum: bb256610eb0142620d3c7d961e10f1a3
SHA1: 8128dc95445f76f839942dad11ca76fa6e267fc0
SHA256: 90c5fb62244fb657953f386663e05c88874052558be49822eb96cac3ec7a8109
SHA512: 312e969c4d0f3ce07526fd273d5d6d47a6224edb2e4d4aac4d7152e7172981e37a779b9f4c6d0fe5811b03beccf9f1e5007f4dccfc83bd8a1823f44757931ad6
Description: debug symbols for webkit2gtk-driver
Auto-Built-Package: debug-symbols
Build-Ids: 37aaff2d171c132dcaa866d06052c5db75370ae1
Package: xdmx
Priority: optional
Section: x11
Installed-Size: 4106
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfixes3, libxfont2 (>= 1:2.0.1), libxi6, libxmuu1, libxrender1
Filename: pool/target/x/xorg-server/xdmx_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 3006980
MD5sum: 92f79f85793ddb42d4c6d631e813c1d9
SHA1: 56a07fb4dc7b64ebad6dbbe846bb873306dfc8b6
SHA256: ea9d748fecc07c10fb9ca6093d4644595ca464250f9d57928536d64245f61a8a
SHA512: 11742a1e87b8604739fa7515b8326ce5c5c8668a16648f704bb7e11630c7610ea9b138c1cdd00bcd069f1361fad82e171a717c21417eb040b2011b3e7708e61a
Description: distributed multihead X server
Xdmx is a proxy X server that uses one or more other X servers as its
display device(s). It provides multi-head X functionality for displays that
might be located on different machines. Xdmx functions as a front-end X server
that acts as a proxy to a set of back-end X servers. All of the visible
rendering is passed to the back-end X servers. Clients connect to the Xdmx
front-end, and everything appears as it would in a regular multi-head
configuration. If Xinerama is enabled (e.g., with +xinerama on the command
line), the clients see a single large screen.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xdmx-dbgsym
Priority: optional
Section: debug
Installed-Size: 3098
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xdmx (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xdmx-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2963080
MD5sum: 34406cad6c59155b0707511208fb762e
SHA1: c41ab7673d81283ba888aa0ce5e2b8f45734c78b
SHA256: 278db775eabc0206ceb5b896f96a3aa32807ec2f9b7a94a282c09ecb2cd56af8
SHA512: 875b13e274e3395a1c06e0075aa607bf6a2fe7f707d0d86f243b88f18571afb126204b9df7a8fe9eeef5c6eaf885550bfbf9fa1c7f20e412f60dc7525b24a316
Description: debug symbols for xdmx
Auto-Built-Package: debug-symbols
Build-Ids: bc1ef0355fb2ae25e524895a70ece47ccd74f8a8
Package: xdmx-tools
Priority: optional
Section: x11
Installed-Size: 2602
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xdmx, libc6 (>= 2.14), libdmx1 (>= 1:1.1.4), libx11-6, libxaw7, libxt6
Filename: pool/target/x/xorg-server/xdmx-tools_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2329020
MD5sum: 1fa620efbbd2abe787ade7ac10e2e64b
SHA1: 168e40e80dd302b2ecbb08eb72ea5ae3e5d3a789
SHA256: 4a07899043bb4aa524558834e65363c796ecc2e6ca2db240dda97f849161ddcc
SHA512: 715fb06fd5b4002c33d393fecb12cc80d52a7b572b80567b6fb87da17cdae27a4a0b74219f28de70de20b8efe14908aaa520a2d6c77f3ed39069b2ddb7c03f90
Description: Distributed Multihead X tools
This package provides a collection of tools used for administration of
the Xdmx server; see the xdmx package for more information.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xdmx-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 306
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xdmx-tools (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xdmx-tools-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 200316
MD5sum: 95bf0dcdcfd411f99462c4326a7514c7
SHA1: 937fd713259f5dd6688f21ce828aa2cb2f82d5aa
SHA256: a446cd0b64cbba643fd00d9ccf13f832af727664d757cada8b1291d0d6b4119c
SHA512: 5c646a53f7ec849ce097accf00ea5dd9afd1a95678fbc9888756cfb21b6d72350cc30334132a10c6e396312d733f31c0930014eb9c4248e186c5a14cadd54642
Description: debug symbols for xdmx-tools
Auto-Built-Package: debug-symbols
Build-Ids: 4aad7865ebf37a5de4f917c6f35bbc19488602db 50d522b8d38813a3bf106f437c350773434df303 82a4f010fe783c00e5e165374b050969ee7e39d7 8dc6c7006f930bea005127c7417d964dfd14095d 92517a3e3746e67d1441014fab4c7b6647a33dd8 a8df9ad594f29648616361143c808c6dc7ab72f1 ae6d93b02ea7da0117b96dad83440a6c40d7273d cb073c11f2cc0fee7f40a941d1beb4e1259e71fb d1d8feb530912ae9261282bff25738935394c45e ed976ffd121339ad81c8afaa5b7af9698bcf87c9 fddaa54059e78b3039df9485000ae2fe1cb95a51
Package: xnest
Priority: optional
Section: x11
Installed-Size: 3918
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.13.2), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfont2 (>= 1:2.0.1)
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xnest_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2922204
MD5sum: a1f7ec404747ae0d8b2648d23322d554
SHA1: 84eeee36b185a862797c3e2281017ad057257564
SHA256: 726aa08ac877b123a56b7ef525bce9ed5760a3e4e11414fa548147068a87d5d2
SHA512: d29d00167b0652a80f29d96833ceeb8ed3c158af759a596749755ece32409d3354333b54dd0506970315c4b77442a4fe9e20b5f61972a39c3e700360c7c71edd
Description: Nested X server
Xnest is a nested X server that simply relays all its requests to another
X server, where it runs as a client. This means that it appears as another
window in your current X session. Xnest relies upon its parent X server
for font services.
.
Use of the Xephyr X server instead of Xnest is recommended.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xnest-dbgsym
Priority: optional
Section: debug
Installed-Size: 2789
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xnest (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xnest-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2660220
MD5sum: 8b121d7391ba698b46b07bf06c5a0dc8
SHA1: c49deacea9f39c31e5359df2f9201ef07641b651
SHA256: 09e4cf1c3d40e61b4f5afa8fc9cb45b19885fb1757e328099855a7c02c3e9275
SHA512: 1f2db2991b06aba7715ef513ff6ca4573b58fb3f5c26b107d98b715ac4e3502fc54eedb366ade3359b2f61ae5af5b2abf16bf528dc4e9d6f6cba3827b8d8dca4
Description: debug symbols for xnest
Auto-Built-Package: debug-symbols
Build-Ids: ad3234439d7ecbdb2b1fe77aedc3a1de4bf604ce
Package: xorg-server-source
Priority: optional
Section: x11
Installed-Size: 7411
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Filename: pool/target/x/xorg-server/xorg-server-source_1.20.11-1+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 7497536
MD5sum: abb65e5da2c6b0c14970a73f57a4be70
SHA1: a294c2829410f87ad74972c2bb261c9503f3aed8
SHA256: c0739191869f7d57b9b7d9b259c07d4df28737e3a570ba16d8ef8666135c7812
SHA512: c304b5f210616220b321cbf238b28ab216ebdec065d5a23f9a1ff583fd3de2adc757914b6856b48fb43c2297a115f6561a622b9e5c335e25d6ac2adadb13da30
Description: Xorg X server - source files
This package provides original Debian (with Debian patches already
applied, and autotools files updated) sources for the X.Org ('Xorg')
X server shipped in a tarball. This enables other projects re-using
X server codebase (e.g. VNC servers) to (re-)use officially
Debian-supported version of the X xserver for their builds.
.
Unless you are building a software product using X server sources,
you probably want xserver-xorg and/or xserver-xorg-core instead.
Homepage: https://www.x.org/
Package: xserver-common
Priority: optional
Section: x11
Installed-Size: 2359
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Replaces: xserver-xorg-core (<< 2:1.5.2)
Depends: x11-common, xkb-data, x11-xkb-utils
Recommends: xfonts-base, xauth
Filename: pool/target/x/xorg-server/xserver-common_1.20.11-1+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 2296504
MD5sum: 27728e1592db78d342a9e1e57016ec9f
SHA1: bcc84baa1d1f0ccd887a52115b7839c5bb63e170
SHA256: 3ae91a35e84a7eb1d3eae70b78ec4e584e15d2635a0f9cc1d33f457d12215c6a
SHA512: 4682762bb420295523e5f22484e68b68d8a56854a1181d0f2f5c1b8fdb9061a1f0998a4e309f21ecc14c1463d0ff1fffcdd9d57c518f7abecd88e7d3ce8c4906
Description: common files used by various X servers
This package provides files necessary for all X.Org based X servers.
Homepage: https://www.x.org/
Multi-Arch: foreign
Package: xserver-xephyr
Priority: optional
Section: x11
Installed-Size: 4443
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libepoxy0 (>= 1.0), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxau6 (>= 1:1.0.9), libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.1), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-util1 (>= 0.4.0), libxcb-xkb1, libxcb-xv0 (>= 1.2), libxcb1 (>= 1.8), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xserver-xephyr_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 3130376
MD5sum: 0e6d0fea3aab50d72e7ea85e6c2c72bc
SHA1: 8ec300f51bc5d02300371f9882b649ae14b64ad7
SHA256: 30917e7d1feb04fc81feabc965d58db95c80c3df2b69ced914aaac76081fe019
SHA512: 856801f6ef0b3e538671e561b204c50fd6981e2ca09d859a47c2a79143d77ffe78f107b3610f1222236659df1befd32565b6039dd062f237bbff3056bf3b3c28
Description: nested X server
Xephyr is an X server that can be run inside another X server,
much like Xnest. It is based on the kdrive X server, and as a
result it supports newer extensions than Xnest, including render and
composite.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xserver-xephyr-dbgsym
Priority: optional
Section: debug
Installed-Size: 3688
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-xephyr (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xephyr-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 3531180
MD5sum: a26ab901d27ec80ae104e7dbac211527
SHA1: fd745137ddf5dacc68aff1f57874abb95758c289
SHA256: ac18496815efb20a0301941546e14c4237d8b23411ab74f1c5c22bbd578291a0
SHA512: 8103490d7a11e454638346fdd4c7259a389b36344bdaf4025e245cc4a1a96ca603169b94ece8967372200e5c98f1a2ff3fdcd03203ad6c42e98372fc55747501
Description: debug symbols for xserver-xephyr
Auto-Built-Package: debug-symbols
Build-Ids: 1796eb1ec93ae4ef9d386a8374e241a3c55026d9
Package: xserver-xorg-core
Priority: optional
Section: x11
Installed-Size: 5794
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Replaces: xserver-xorg (<< 1:7.7+10~), xserver-xorg-video-modesetting
Provides: xorg-input-abi-24, xorg-video-abi-24, xserver-xorg-video-modesetting
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), keyboard-configuration, udev (>= 149), libegl1, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.4.66), libepoxy0 (>= 1.5.4), libgbm1 (>= 17.1.0~rc2), libgcrypt20 (>= 1.8.0), libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.10.2-4), default-logind | logind
Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable
Conflicts: xserver-xorg-input-evtouch, xserver-xorg-video-modesetting
Breaks: libgl1-mesa-dri (<< 18.0.5), systemd (<< 226-4~), xserver-xorg (<< 1:7.7+10~)
Filename: pool/target/x/xorg-server/xserver-xorg-core_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 3548368
MD5sum: 6436848656c676c4e370fda277824108
SHA1: d28629702d87d8f26a15c95c1bd896579beef28d
SHA256: d372992ea90de52fb0af0694367935a968c16cce53a4444520f41645da6f66a5
SHA512: 9cad7bd6570cb54845d1716c64e194d01fb5c3554b800b8a8ef0be37488f1a9604dcc632c35fdc9ac2862b8ac82c754c30e78199f635a484342aa73eb1d90410
Description: Xorg X server - core server
The Xorg X server is an X server for several architectures and operating
systems, which is derived from the XFree86 4.x series of X servers.
.
The Xorg server supports most modern graphics hardware from most vendors,
and supersedes all XFree86 X servers.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xserver-xorg-core-dbgsym
Priority: optional
Section: debug
Installed-Size: 5561
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-xorg-core (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-core-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 5236516
MD5sum: d4eb639b4571de9ca0831496cce8109b
SHA1: 73c4b993a417ab248be14473b9ea993559e1af8b
SHA256: ae00af76c83dd828cd9775bec54564fbb1790b61421239e34421ac7c35c13046
SHA512: f092f021962dc1b4300b33524b866f27016dbd5da0fc0e5e6cf0733cf7664af2d899abd61a24c2595935e792338ec056e7a6726517911887227092040faebd68
Description: debug symbols for xserver-xorg-core
Auto-Built-Package: debug-symbols
Build-Ids: 0f4fd0993fd7c471ab04452c0e4ed23989832d44 156b1758fc29830feecc281cd522eb28ce3c435e 3136edd86815f2ecef69690138752eb76fd41211 63d1501c4c28f2105b072bf67b09c97e709db92c 6e269a6296ad03adc0b4f686e72b654a4ed26b8a 70f5e1e5c55ca9305a18dcf3f7d47388295254b1 76d2913d6d6a38f8e69015563785f4bf4d729e0f 7c6372274a35897ea1e8eea907d318e90327cc86 82c40ffbbbf49125eed8755ce909e22244d8b716 9a63ab3e57eff80297609208bfabceecc7137f54 c187148a14d83feedf0a2e0e8a491c44d87d45a2 d64310e1a842fdac1d48e2da3a83d858d7df4477 f70be8ce88f4749488caf27bf061b877b29bc104 fd0f9dc6ae866a9ddc4882cf96d33eebe1b421af
Package: xserver-xorg-dev
Priority: optional
Section: x11
Installed-Size: 3556
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: libpixman-1-dev (>= 0.27.2), x11proto-dev (>= 2018.4), libxfont-dev, libxkbfile-dev, libpciaccess-dev, mesa-common-dev
Filename: pool/target/x/xorg-server/xserver-xorg-dev_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2470000
MD5sum: e127721aab73a9d0a8f06d53c9ddc9f0
SHA1: 8d874e5f5f9431c9b6ef91b5b99cc0f8937e611b
SHA256: 9cfa685bb155b5fd27b798410a608308913bb5d1591201688ca42d392087d412
SHA512: 3111d74ee2ea25df6e9e1c78bdf5a24d753c5d04b7049da6f5f906de555e48130a939627ddb5bb1c94bee5349cf483976f455b4ec5d4d305a6ccba60a32091b8
Description: Xorg X server - development files
This package provides development files for the X.Org ('Xorg') X server.
This is not quite the same as the DDK (Driver Development Kit) from the
XFree86 4.x and X.Org 6.7, 6.8 and 6.9 series of servers; it provides
headers and a pkg-config file for drivers using autotools to build
against.
.
Unless you are developing or building a driver, you probably want
xserver-xorg and/or xserver-xorg-core instead.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xserver-xorg-legacy
Priority: optional
Section: x11
Installed-Size: 2391
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Replaces: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libc6 (>= 2.3.4), debconf (>= 0.5) | debconf-2.0
Breaks: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2302168
MD5sum: cc88bee821f30505a9e5c1f2faae35a4
SHA1: 541bb91d8082f87471d611f16bf1f9aa7fb84e25
SHA256: 228a441993dbae62c50f0d843232535e307c09238e9787c8c3a3093096cdac93
SHA512: daf121107d52dd9ba7fc058f8fbd9e3a04480f8b7fb3144b1b092c61c466763eb970258ca9615218d20ac175c40de3459a02bff70de1759a29ebdcb2571a612c
Description: setuid root Xorg server wrapper
This package provides a wrapper for the Xorg X server, which is
necessary for legacy drivers and non-Linux kernels.
Homepage: https://www.x.org/
Package: xserver-xorg-legacy-dbgsym
Priority: optional
Section: debug
Installed-Size: 23
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-xorg-legacy (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 8844
MD5sum: 3662834a6aec8b82def01ab9dd5be47d
SHA1: fce531f23ee50d5759a01df77eff45deebc55828
SHA256: c169eb51f16c0eba36b0a18a7d925d1297329b0e697d1ec5de04fc67b227f917
SHA512: 1f3252f18644022a28d49c344497027d17dada0a60b79ae7a0b4105cb2412be46fc77bda6ebc0d1de977c1d7862966ef02d4b9066e03090a9956c192c6788ea7
Description: debug symbols for xserver-xorg-legacy
Auto-Built-Package: debug-symbols
Build-Ids: c1d8acb2be065b1632cf5a84a9d83cc47d548aaf
Package: xvfb
Priority: optional
Section: x11
Installed-Size: 4075
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1)
Recommends: xauth
Filename: pool/target/x/xorg-server/xvfb_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2992904
MD5sum: 6a3e420a9cd206cf4a3d1e3340799adc
SHA1: d3c7f13c0452d2530ef103c6afebafd6adcd2c26
SHA256: ad794a22def56048f8f93e3923b60d4623c75277da43df98070ed18a0e16908d
SHA512: 587b8053c55540c3acc9d406993e64c38f9694cd75db627813291a1a939db6f3081f9b9f83b288beef00023c5da62ac8ec8dd9e7ebd396012b9ef6af39045176
Description: Virtual Framebuffer 'fake' X server
Xvfb provides an X server that can run on machines with no display hardware
and no physical input devices. It emulates a dumb framebuffer using virtual
memory. The primary use of this server was intended to be server testing,
but other novel uses for it have been found, including testing clients
against unusual depths and screen configurations, doing batch processing with
Xvfb as a background rendering engine, load testing, as an aid to porting the
X server to a new platform, and providing an unobtrusive way to run
applications that don't really need an X server but insist on having one
anyway.
.
This package also contains a convenience script called xvfb-run which
simplifies the automated execution of X clients in a virtual server
environment. This convenience script requires the use of the xauth
program.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Multi-Arch: foreign
Package: xvfb-dbgsym
Priority: optional
Section: debug
Installed-Size: 2999
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xvfb (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xvfb-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2876484
MD5sum: ca1cc1de59aebadfc38c0394f4456282
SHA1: f39099e3b004f7bf9831698df05553da42955688
SHA256: 996454d7c5e3c5335877f439ba2b64ad2330615224c29cd96a289d6bdcf58c80
SHA512: 367388532fe5f83b9f2588e29bde980c33dc4550485f42402bb21c7440d921c6ac402578417eeb73c4793997bf6e1b1cf01733ab6928a75dea4258cef93b1df9
Description: debug symbols for xvfb
Auto-Built-Package: debug-symbols
Build-Ids: 92f603a97c9aa86c438fb32267167b0799582ad7
Package: xwayland
Priority: optional
Section: x11
Installed-Size: 4126
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libwayland-client0 (>= 1.9.91), libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Filename: pool/target/x/xorg-server/xwayland_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 3004512
MD5sum: 9e64e179ef7175685c4df290358e8f99
SHA1: 11a34a48ba2d2962b17d2e10f8a8e0639d93d374
SHA256: 88fdf3674d6ced93e81bdf6acdea466e41ee25970123c6b3a137f65f24f5b42e
SHA512: 19336c02c0cc6084c46ba47b03d5628637de336ca526a6efcda33c4fd434aa2c93896d0b30d2291ca52472f879b434199386b051fc2965bfe761fff0eb67cfdb
Description: Xwayland X server
This package provides an X server running on top of wayland, using wayland
input devices for input and forwarding either the root window or individual
top-level windows as wayland surfaces.
Homepage: https://www.x.org/
Package: xwayland-dbgsym
Priority: optional
Section: debug
Installed-Size: 3121
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1
Depends: xwayland (= 2:1.20.11-1+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xwayland-dbgsym_1.20.11-1+deb11u11+apertis1bv2023.0cb1_amd64.deb
Size: 2988592
MD5sum: 8234dd5b4e4a34d3325293f47a6cf8e2
SHA1: 6f0c2450fd4b931884c9d7f61c08970168aba07c
SHA256: fe500406c93da1ea94ead5520f79756e520a965ba31e9e04f4ee77361a5e770a
SHA512: 3a1bccd98a7d6b6e1e7428ee3c20c76d6707db5d90463e411cca2a00aac5eb6441cada8baaa1f4a583702c27bcf9b46f0fd19822aab9bf4c64ff6f2031ed895d
Description: debug symbols for xwayland
Auto-Built-Package: debug-symbols
Build-Ids: d341b5f3adddae75b637ae24ba4149544279b74f