Package: bluetooth
Priority: optional
Section: admin
Installed-Size: 76
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez
Suggests: bluez-cups, bluez-obexd, bluez-meshd
Filename: pool/target/b/bluez/bluetooth_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 50204
MD5sum: 899d4622cff71a98b2b5a47ec89a4c71
SHA1: 15a3ca01987070790237dcc1aff3f47ef2f1e054
SHA256: 7f3658a8c3c11231b58c0c855dd5aa10b1602681885f86a4730fe0e2d15410e8
SHA512: 46cb2ec035b62cdc7996f547b67c89e49d828f57c7e3a55062256b83e257fb2740872dd31b67c4be4fb64b70998de6bed43f30b205930d401acdbc6550f6d964
Description: Bluetooth support (metapackage)
 This package provides all of the different plugins supported
 by the Bluez bluetooth stack.
Homepage: http://www.bluez.org

Package: bluez
Priority: optional
Section: admin
Installed-Size: 5906
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libasound2 (>= 1.0.17), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libedit2 (>= 3.1-20210910-1+apertis1), libglib2.0-0 (>= 2.31.8), libudev1 (>= 196), kmod, udev, lsb-base, dbus
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: pulseaudio-module-bluetooth
Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Breaks: udev (<< 170-1)
Filename: pool/target/b/bluez/bluez_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 1044688
MD5sum: 56f6e176e038c297fe362a26c32877a7
SHA1: 96fd1d08f8eef74a11c0f5ed54921818d787c42c
SHA256: 59c0d56a2f5c0bb015b2938ab90ebc804f001311658310995bf403848533bb34
SHA512: d96b0e3dc52efc0d7bbcd55d2fde84300db569d25338febce27c9b5d977c84ad732cb693b1a0ed7aa750cfda76fc8a429c57ff907c5162f50afcfca8787b7ea3
Description: Bluetooth tools and daemons
 This package contains tools and system daemons for using Bluetooth devices.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: foreign

Package: bluez-cups
Priority: optional
Section: admin
Installed-Size: 296
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0), cups
Filename: pool/target/b/bluez/bluez-cups_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 117016
MD5sum: 8ae50cf29a2d64cf19479e77474b87a6
SHA1: f88028fb170c463f96d3659f4948d90825e5f94f
SHA256: ad995d3189d5995777312f36a38b5de56537b988a8cae2b0584fb88a3483ad2e
SHA512: 4bf6dae1974c1d35658a37d110c3e2d6adc796fabbc361d170f82f64822b028480907238f038dd504b740b02faba7c484e787ffc3252df802cf6a6299ca4fad7
Description: Bluetooth printer driver for CUPS
 This package contains a driver to let CUPS print to Bluetooth-connected
 printers.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-cups-dbgsym
Priority: optional
Section: debug
Installed-Size: 192
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-cups (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-cups-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 160048
MD5sum: e4482bf5b219c0be88966d8b96fd524a
SHA1: 30a319ac509f339944fc8d6fd783243543c4f003
SHA256: 16308d9d02f9034983b38f1bd17d026819917946f2806fed7dc8f864903a16bb
SHA512: 2ab4553d308f2a24d2e0f39654929d2e3be8d9402163080133be40592123e58ebe8499237b8e09b6f8a05870416aa1640917f64bc576aa5bd391df276f50b70f
Description: debug symbols for bluez-cups
Auto-Built-Package: debug-symbols
Build-Ids: 286890c8e888ed5661c4573eeb167b1b3d5703a5

Package: bluez-dbgsym
Priority: optional
Section: debug
Installed-Size: 4793
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 4128752
MD5sum: 8eccdf1b23d73d7bd6c1d45c6520cd06
SHA1: 8caa58de8a3c481981846604aec27b23220b60d3
SHA256: 2ea546c4cf376529f0580131f809bc20ff2399f8ef5b0b94f243778345e0ec11
SHA512: c6379f071d4c521206f9e0c21be499912a1e31bd994777cedde096c91ca5ed6d057af090889e61a0060a90beac8e855666fe2a98b493b459d0ef8a3f2e266569
Description: debug symbols for bluez
Auto-Built-Package: debug-symbols
Build-Ids: 01e82d72cc562c7656a9b23219b1f146e9790094 134e81b4a8b0d547554627a27f1aedc9a7052996 1cbf8bdb89f7b7c1281e040636d529bb1fdd7396 21937a7c2798f7990b93a042c2d271542a6d3d07 21a35fb0cf490a63407a165d488dfa058a99ed13 318adf0fbb65442c3c709ab3279691a420685d76 327a2b103c09676c6a99b9060a0548ec844a60d0 3e34b75ef97ef3c20f9246c4391f9a20d25efbd8 515ed97be01d279b648565e1683f2ff92e8b2960 52aca973eff39ccdc18107fa114af678b96d9314 5314ba8f2732d7fa0b3646b300f53604aee25891 628660fe8c5fc189c0fe32d1bb5af6c7320dd13d 6f628c35b1c7eddb04a72c5e8e1774110fa6e643 701d894428da1ed746c1218b712d778ef0b7b783 734c3b3265420883e129525781e941478f170951 92fa817f706fcf571268999c988fa71aec8cbe79 af706f923b73f76867f0a371180ae690686bb631 c689c7215f6c53b41b5917ff76341a5bc7930c58 cd1383149cfaa4f38cef918d771ca7a9262ae3e8 eb2bd4ed7d0e834d0a4b7ea31d15931d42a995d4 effc40244c57c02c52481d58a23b777b8ce69f1f

Package: bluez-hcidump
Priority: optional
Section: admin
Installed-Size: 585
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/b/bluez/bluez-hcidump_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 190920
MD5sum: 442648be3171d98639af1970e7591bbe
SHA1: a76d43c1f822c76b822a11c73b2ee5b89aa4b96b
SHA256: 1750ede22401edb4bba3e341bdd48c3eed4a66cd9d6e2eb99b7ea785ee1e6067
SHA512: 61eae3b7f7a52a4a56842b5051d29d701c5cf6d2f3c621dcece423b3e72728224e497449501b307c42dfaaa1bdbeb52a6e6a8665c5b203999ac54f2d54b60d79
Description: Analyses Bluetooth HCI packets
 The hcidump utility allows the monitoring of Bluetooth activity.
 It provides a disassembly of the Bluetooth traffic and can display
 packets from higher level protocols such as RFCOMM, SDP and BNEP.
 .
 This was the software that is independent as bluez-hcidump, but this has been
 integrated into BlueZ from BlueZ 5.0.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-hcidump-dbgsym
Priority: optional
Section: debug
Installed-Size: 621
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-hcidump (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-hcidump-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 596820
MD5sum: 698e271728de065137b7b9c7a0f7e758
SHA1: 2eff85cf18d88fbe15608dcaa05af1a138eee2ea
SHA256: a52dd9ff67e34b2ee42e1bfceb3d0caeb63054ba7934921a5cf811259f590a01
SHA512: 4019f5f01da6d93bc35532941aaf76e4d9ad29f08d68de077672606b50a53edd56a43151793fec343894c13f655c5fbc0e0dc66c08a9c7af751ab685e2e9c7ca
Description: debug symbols for bluez-hcidump
Auto-Built-Package: debug-symbols
Build-Ids: 24657de2a21f9753c47afeaad1c39fc19b8825c9

Package: bluez-meshd
Priority: optional
Section: admin
Installed-Size: 930
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libedit2 (>= 3.1-20210910-1+apertis1), libell0 (>= 0.17), libglib2.0-0 (>= 2.28.0), libjson-c5 (>= 0.15)
Filename: pool/target/b/bluez/bluez-meshd_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 277444
MD5sum: 611fd5a253e6749ff0d727cf50167098
SHA1: a4c4dc93bdb9fd934377a35dfa4110e408a3c95b
SHA256: c72bdfa1929d6a19c28507b6a916ba3319c101fee45ead547feb3a56c7497edf
SHA512: 9e83143af6a574d1ccbb0007fb9e15bdae6939209328b5e68726d4c25a80f5ad05a7bfa2cfa5a0220204661d55492bc722738d4f359493f7c608411cd865fc1c
Description: bluetooth mesh daemon
 The Bluetooth Mesh network is a new Bluetooth feature that extends "Bluetooth
 Low Energy (BLE)".
 .
 This package provides daemon (meshd) and tools that provide Bluetooth mesh
 functionality.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-meshd-dbgsym
Priority: optional
Section: debug
Installed-Size: 963
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-meshd (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-meshd-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 849440
MD5sum: 1d7c3f94e98217b6fd213f59a3773d90
SHA1: 8ca9ceb95b78f84cd7eb50843a7c6f4e9057fd79
SHA256: 4b8dcdf1000ee9a35cb2228177eeb0296295be4b7476bf93e89028ca97ad111d
SHA512: 29992ee948dd508141c9c7293ef1a5edb58fd33c9b95fb852029b584c87302605f266f630fbd80250c446b471259c88902c51441da3e9f5cdc6eb53075f1a725
Description: debug symbols for bluez-meshd
Auto-Built-Package: debug-symbols
Build-Ids: 4ae9e53649ebe475dda51656dc4b34a6c8fbe5fc d5d2615399d195a585a9ecae43a2b3beb5236452 d93c4dd1420801cc88c725cbc0c24d94732be987

Package: bluez-obexd
Priority: optional
Section: admin
Installed-Size: 648
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: obexd-client, obexd-server
Depends: libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.35.9), libical3 (>= 3.0.0), init-system-helpers (>= 1.52)
Recommends: dbus-user-session
Conflicts: obexd-client, obexd-server
Filename: pool/target/b/bluez/bluez-obexd_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 219836
MD5sum: 35c8af63515a7688bb9c261a65e33813
SHA1: b7dc9648750a8d5f719c5de8dfc01ac0394cd251
SHA256: d59a7909583b89e1c4cc4fa3df1b69ee68f93ee0ee75144cf8c069de95e1d9f3
SHA512: 101cca92ff495ea5634cc88bc24decd34d0db879a3903dee3d6228db708f88a956aca4a8e651da732c44e3d7891bbff4c546423fe0ac27767356d1426f782e2b
Description: bluez obex daemon
 This package contains a OBEX(OBject EXchange) daemon.
 .
 OBEX is communication protocol to facilitate the exchange of the binary
 object between the devices.
 .
 This was the software that is independent as obexd, but this has been
 integrated into BlueZ from BlueZ 5.0.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-obexd-dbgsym
Priority: optional
Section: debug
Installed-Size: 586
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-obexd (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-obexd-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 507364
MD5sum: ca5db10d1e1b7a2c705451e45bd3245e
SHA1: 428337c311b1824c79facbb456926025cb18b9e0
SHA256: f38aac80158c102e0f5fba65b281cf7486a84f45cfbe766c6826befd670b55dc
SHA512: 5b7a4b176c53a3476641d5174ae1d840c26e58a20e1f63a7fed01cf7806e984253ee6e26da5da5d9432893ca77fc768bc745c6d311462e728857c31bb9032851
Description: debug symbols for bluez-obexd
Auto-Built-Package: debug-symbols
Build-Ids: 8f04ee0f702d2b6349727fdeccea59d861bc73b6

Package: bluez-source
Priority: optional
Section: admin
Installed-Size: 32998
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Filename: pool/target/b/bluez/bluez-source_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 33706904
MD5sum: 0a8d6a542f6bb3411ef8d5eda8188ecc
SHA1: 24f197c77ae83dd363feb9b32c30108aa3e538b5
SHA256: b58c518384267e4142af0e6b3cda0896cb6bef2cc8da766607d6bcc85a00227f
SHA512: 826135247f5710f63314071ebdaf6919cfcb4f0f32b782613d4d0f83d2131ccf7b2797cf05ab65eff6a897966710fc74fc78d7bec07b925be242edab26e5ca89
Description: Source code for the BlueZ Linux Bluetooth stack
 This package contains the sources and patches which are needed
 to build bluez.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-scripts
Priority: optional
Section: admin
Installed-Size: 297
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Filename: pool/target/b/bluez/bluez-test-scripts_5.55-3.1+deb11u1+apertis1bv2023.0cb1_all.deb
Size: 83504
MD5sum: e8b3c3f322a96e354432e24b9994f2fe
SHA1: ef158919c110fc676acaa6319dc3c795eb725e8d
SHA256: 3d4c6f7eaf7baa45419cba0d1742571a69898a1cadc994c3365355f9bc1ba0e8
SHA512: fa90af13b890c11edd6efbedaae2efda7f2e5d5b3e8048385eed0432e12abfb3c7799b9429ee5b5c5f38299b5e6beecc83daedf1d77dbba15804582c434fc9a4
Description: test scripts of bluez
 This package contains test scripts for using BlueZ.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-tools
Priority: optional
Section: admin
Installed-Size: 2871
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.28.0), bluez (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-test-tools_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 327360
MD5sum: e72635fcb72bc2c75f10a3aa6aa2214d
SHA1: aa6b7b72ac8be9de1f1e862ca070cd1bde08da2b
SHA256: 6258076f1bd23aa00814f8c63b2ce848b2e9c1755c2a95b3729d2b8cbae30ab2
SHA512: 8d95611c3a90fdcfecdf4c82557349055d1e3521122c16ded309983ef0b204e7b12f3393735c5f9ca2e7e2bceece592e155a59643cc14f3a9a99c819f8da60f2
Description: test tools of bluez
 This package contains test tools for using BlueZ.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 2306
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: bluez-test-tools (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/bluez-test-tools-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 1898564
MD5sum: 2617eef0d761bb1a6c0ed757f3817bcd
SHA1: 42f40d8cde6491f1ed78dd93885be7974566e327
SHA256: a4ab2e2d2b3a5e4a23272ce05be1b0eab6aa658cf38a9f1ac0122292c2c57af7
SHA512: 212fdad0879d24dd1002c33c0e45c31f49f9434f66b478e53e791db0db4254cdc9e353c8e2022717c2d85b2862f6965332d019afb4d2780664e087503a234d31
Description: debug symbols for bluez-test-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0c34521a9defcd28f5a92ba3e345792d977f1785 1f550ab46063d797941700b07649a648bc1853e8 293c99822f98afbc26f97ea86a1bdd6555ed7b0d 3402b0dc786b82023718fa6ee9405cc0d4c05006 5566a0e91bf5aa3ce368e71614bdfc0366acdca2 64d6e14ba2982d186cf29d4b0f8b9f66d3dde75e 75687db5e89915465e176c4d6ee271dd12e64349 a888ffe29175ddf4a332493d9ec53206f909b6c7 af3531576715629b2db615cbe00aaaa2e33f4c5a d6debc4d6ccf1601232d3ca9bd38536e4ecf5597 de5a4defb7ac15e2ddc4ded0ce1decd44b647aee eb6aa8c382ab1df062384df162b90366d0633800

Package: curl
Priority: optional
Section: web
Installed-Size: 428
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1), zlib1g (>= 1:1.1.4)
Filename: pool/target/c/curl/curl_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 268336
MD5sum: 550abbf7a288f72e32e2e617b6948047
SHA1: 77704f2658a69f029806060be85411d894f83ccf
SHA256: 2966849bf153e5f724f747789978d56130797b0725d1d66ce7ea7264f5e260d3
SHA512: a0168c1a170df67813e130ba8eba8004871c1f79057ce191002c35930bf3f751a8ca291c0eec525f0ad61e8ea9269892d665e64be66138fdadf45f0460357028
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: http://curl.haxx.se
Multi-Arch: foreign

Package: curl-dbgsym
Priority: optional
Section: debug
Installed-Size: 170
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: curl (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/curl-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 143600
MD5sum: 8ca16f4ac3dad83bae69d6cf40678ff1
SHA1: 09ef99742197b412b74e488ba7494f53bfbeade1
SHA256: 969f111d8d5313990bfcab8b27e009f00fe9920cdce1763c06602772d0917cbc
SHA512: d6970c17c0502b5a00886d1b6f9d0e46d5427417633bfac20b5ff1bff2a53a8cdedbdb7b3779bb03d194940d0a53039891779648cfce711989bcf442c77ab10e
Description: debug symbols for curl
Auto-Built-Package: debug-symbols
Build-Ids: f6b507a89b70732a424af6a4c155abe80a605d0a

Package: gir1.2-gst-plugins-bad-1.0
Priority: optional
Section: introspection
Installed-Size: 2074
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), gir1.2-gst-plugins-base-1.0 (>= 1.18.0), gir1.2-gstreamer-1.0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (>= 1.18.4)
Filename: pool/target/g/gst-plugins-bad1.0/gir1.2-gst-plugins-bad-1.0_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 1955556
MD5sum: b72c7a29fe708a81b82dfa5648ce7984
SHA1: b2dbf5bb0d1f504d9293b6f72c24e70d89b1ae28
SHA256: 6c52ece8e4b2798a10188a7ecbc7cf240bd75456d96290164efd3ed3b45374a4
SHA512: 96e0a95944596633195b13623acec4a44e0f7e2124a53826f9510588ea9275175dcd8565590a28e0ea3b0d1f40e8a521cb2e465f9719ed97ebb8712e47b495b4
Description: GObject introspection data for the GStreamer libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains introspection data for the GStreamer libraries from
 the "bad" set. It can be used by packages using the GIRepository format to
 generate dynamic bindings.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gir1.2-javascriptcoregtk-4.0
Priority: optional
Section: introspection
Installed-Size: 469
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: gir1.2-glib-2.0, libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/gir1.2-javascriptcoregtk-4.0_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 213836
MD5sum: f252aa2c3115e8c9d242c6671ce2b4b6
SHA1: f6df3bf8f46843694a78fe7a149c549c3c52765c
SHA256: 059afe8dc4a57767c8c66532c5448594888f47bbdbb591c954882e62be99499c
SHA512: ee16d60eb6c6a842ffce01a054d303a1ab7664a69506c427dd9a8b42c5c70befc08717a0ed6a88548b73a993df3c498d6e67e667301b03a5368c3d963ff6d897
Description: JavaScript engine library from WebKitGTK - GObject introspection data
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: gir1.2-webkit2-4.0
Priority: optional
Section: introspection
Installed-Size: 762
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gir1.2-gtk-3.0, gir1.2-soup-2.4
Filename: pool/target/w/webkit2gtk/gir1.2-webkit2-4.0_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 266732
MD5sum: e96bd36c602b85cd5f0f1ec0e936675f
SHA1: d52bd732c509af467ce4fb31ca3fc0b5e85e73e1
SHA256: ceee2baa61d071302341f568c4d1d674286d3c8532060a36f0b7229ae2b127e2
SHA512: c2ab39cca7abd4cdf78cf79d9c19b470df3cb2f820174e55c7a8037012de7810ec52c8a59266c5948a23069979e4f8ceef8c591cd4d78a5bfe78b77d2c45ec7b
Description: Web content engine library for GTK - GObject introspection data
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: gstreamer1.0-plugins-bad
Priority: optional
Section: libs
Installed-Size: 7703
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-plugins-bad-faad, gstreamer1.0-plugins-bad-videoparsers, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization
Depends: libbz2-1.0, libc6 (>= 2.29), libcairo2 (>= 1.6.0), libdrm2 (>= 2.4.47), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.53.2), libgstreamer-gl1.0-0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), libgudev-1.0-0 (>= 146), liblcms2-2 (>= 2.7), liblilv-0-0 (>= 0.22), libnettle8 (>= 3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22), librsvg2-2 (>= 2.36.2), libsndfile1 (>= 1.0.20), libssl1.1 (>= 1.1.0), libstdc++6 (>= 4.1.1), libusb-1.0-0 (>= 2:1.0.8), libva-drm2 (>= 1.6), libva2 (>= 2.2.0), libwayland-client0 (>= 1.11.0), libwebp6 (>= 0.5.1), libwebrtc-audio-processing1, libx11-6, libxml2 (>= 2.9.0), gstreamer1.0-plugins-base
Suggests: frei0r-plugins
Conflicts: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1)
Breaks: gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 3434548
MD5sum: 879ffadc66604bd6a2ae3010af06fd9c
SHA1: 3df1dcbc9db753a2e626555d4c0b4390b0aa0841
SHA256: 12fb8dfeb4f2b970a95072c1e65df25600a1b776f6ac107ec97f6269f6d94f1b
SHA512: 75a1eb0007d68f9436fbde5d60c2f18869d6e0c73ddbcd0b95104a30ee67d8b89379539a5c6859a5308b4f389f21d8a4746d413d5c83521fdae27a859a118b5c
Description: GStreamer plugins from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-apps
Priority: optional
Section: utils
Installed-Size: 1970
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.44), libgstreamer-plugins-bad1.0-0 (>= 1.18.4), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 1934176
MD5sum: ebe2cfca9217edcf0f7475bc22f4d8cb
SHA1: baf164dbcd57074585ce59de11347084b60b313b
SHA256: 1e9b463c9c0dada310f7bc1d6bfd805f2a07c1cdbb6a378868e51aeda46d0b51
SHA512: 8a737b848ce64077df705dd6b506d06dcd48650549b6dec0c55ffbb7110326c3a95a5427953e3e31f2c4c9bad03b035828e1596154ba1108d45ad79ec2c0e919
Description: GStreamer helper programs from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains helper programs from the "bad" set, a set of
 plug-ins that aren't up to par compared to the rest. They might be
 close to being good quality, but they're missing something - be it a
 good code review, some documentation, a set of tests, a real live
 maintainer, or some actual wide use.
Homepage: https://gstreamer.freedesktop.org

Package: gstreamer1.0-plugins-bad-apps-dbgsym
Priority: optional
Section: debug
Installed-Size: 37
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-apps (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps-dbgsym_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 19816
MD5sum: e05a1140cb0c18aec74027b755d59430
SHA1: 023d3ab4b8c6000317f4d460e1dab40936ae73bb
SHA256: 051cdd58493da80f16babc9791d4ec693ac2a25fd8c23c322fbf76b721d7ee6d
SHA512: ad02835b0742dfc6b20e80b273cbb1580b20041638df2a0d7c6dc887821978e065c3bf308fd583c25b6d72278fa4cff15db1c2b4acdcdb2efe7b60f3915de2d3
Description: debug symbols for gstreamer1.0-plugins-bad-apps
Auto-Built-Package: debug-symbols
Build-Ids: 0e78f1916e2ea92631495eda3ee04494ca8f9a8e

Package: gstreamer1.0-plugins-bad-avtp
Priority: optional
Section: libs
Installed-Size: 2042
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Depends: libavtp0 (>= 0.2.0), libc6 (>= 2.17), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-base, libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 1956340
MD5sum: 1c6eaeef9af04a02caa4b42852ce32e3
SHA1: 94cc623bc84ae18a83a79a3cefcfb926edd90195
SHA256: 78ffd131cb15dbcb51e5853af30622db4b000f09ba6be49cf4f1647e72beca63
SHA512: 956488198c2146db946efa2a7ba5fee3421ce5c5f680be36e80df23b24273db54d610de33bdf788aa16f4a6095afa36154b8082ccf296ebe1b089696d1e2c4d8
Description: GStreamer AVTP plugins
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains the AVTP plugins.
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-avtp-dbgsym
Priority: optional
Section: debug
Installed-Size: 123
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-avtp (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp-dbgsym_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 97112
MD5sum: b27b3141ac41a386e8f8ab6f47ea630f
SHA1: c145d9fe7d4950b824373bd85529af9cf1568357
SHA256: 19ff7f0b2290ac7543df892ce558d2eac23bfc20884bfc49f380e768252d357f
SHA512: 658aef53e378485f9284e7c48dadbf172c9eb5b286ebdca2c382d12ee1538089b8896afa105060db345db6fcfc05f085be768fb9929c7dc13b53b725af736851
Description: debug symbols for gstreamer1.0-plugins-bad-avtp
Auto-Built-Package: debug-symbols
Build-Ids: ebb2dec1d1fa2e8ed6de8268b0fb5f5bf1ee8657
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-dbgsym
Priority: optional
Section: debug
Installed-Size: 6442
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-dbgsym_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 5101476
MD5sum: 5fee95f5927a27c162811ca710386479
SHA1: eb513b76f3737613871fccda0ddbd9caf7d17c4f
SHA256: e17fb1b9207f303ebf594503ff3695d98dda0a7d561bfcb7f6bf85003f680119
SHA512: e5c5916b010709e4e42e83987bb8b85439daa2e843dff5cc30397e6f4cd93dad1523c20401da50d629da48bae9e6ce7978c11aac5c037b9d062ecb49dc76caa8
Description: debug symbols for gstreamer1.0-plugins-bad
Auto-Built-Package: debug-symbols
Build-Ids: 0717e218b9578a96672c4e1adf353b12c169c635 0d6dd279c5d3d226f972936b3ffd1e451d3628f0 12f80139ae125362913f42c9fd5502283d17106e 13248eaceb1f94825c1b61a0c9dd5bc66835d997 23241d7e2901a0d0a1a78911fc7998febc2f5695 241db3ca2946b4b0ec28fc15a840aea8d60940be 287f917213f2486281c3622c91ffd15b513d4792 29ffd43ab0a1db1a686da9286c503a1c094f20d6 2e29343d5faa4afdeb43a385dfcd80837cd9f8fe 2fe594a7196b4f04e306bbe484531898c385942d 313949f4afd69f92844f06c615647a04762c7a28 32e2e66b85574110cd45b5629fd311d6be23d43a 336671beed8640c9d3dd7b93e11c82da7da18b31 33d6138016cac532cae641b8b07c958c3c170fef 34102f9266879b7eff3f0e522f633b233e40b20f 378b29cc7d9c7ef82a9b76c1e840b342e38b7e93 3c339fd0d969bae094274d345baef47b695b7c1a 3d28bb5fe7b448405da18ce1654e6c42a36a874b 3d2cc3be7aa085140aa96ece4ee9b98e2b8f9728 3f05a20f691365da6159c610726a48f40fd2a58a 4648422f7519533789ed7969d22a3f048fd9bf8a 494ccf4842b5adc0f79604593ec3c9bd8583e44f 4a3232f0ab8e9ac6703ae3ed84c31bceea8b8da4 4c79bd31d6ff3124a9875ef12c748933f9bd37d0 4cc8f60fb206bddb1c749298b77c319fa775f3a6 4dc3f69965e98b076f9ff7621a99aef56b83230f 4e84c309a7cd46516c743f3203cae09a71616bf3 56ead72ff7ab5d56996fadf0a2663b68d9872792 5c92a9fde70685f4721cfe875e08a722b99c60c1 5f658692767b09cc090624b9cfad0c31c60de0ae 6016d37f5fbab65f1b4f0469ae4f4f3bb55801d5 6290b4a4bd3a724f07cbb442253b0ff443692223 63c9895787b4348e55977dd3fbfb05d41bf26f3e 6590e273570d63e3e7b2c02c600c7be48d8805a6 672e2d18834ea079f720306eff4c163b3cede27a 6d62bd0e7658cebd61b4bc115d65a6c2fd578ed3 6f78fd412ccedd73d2b86c2e7947f8ca541374d7 71b8153c8bd98fac42ffd51f3e5b02fb8e5f480c 72cf3c7e794af14a02402f797db0a24a906c91c9 74adb9cef8310506966020d7e47e4e69f5792295 75af990e49dae64269cacd47b628f291a56f751a 789ca5a45a0e787c412232387be96274a4e31f0f 78d95210275e80c0356b7aa3b906db2eb29848cc 78e55c744efb2c5874571b17047e3f6f1297fca1 7cced760ec30bc6a86fe0e3edfdf383cb0f660f4 80093a4e307755ee3faec3b4e2887216e94c3696 81f2315336d4e98ade8a13b3312c6d3172091f5f 82d13bddb5315bbcb415d5a5a0ab5c29d6bd6887 88bf1e758b9dec8087205baa356ba396a9b7be2b 8b3526e8963a09be370d48c39e5e898aefe29ada 8d41d1a9740800077370702107b3f0e6cdd6d67b 8eb5048843c54c834abcda68242561ed09c88760 94edd21fd7e7b71b3c41edc7e216c6b126b5fd7d 993d2f9808c27c02c1b3b4cdcdff550763e8076a 99a02cf66ed04632f105fca0c7127485ad9908bf 9ab3174f4b60baeaf54f2e618d94176b8aa6d941 9d8cff5d18b71ddfe598cf44c9966349b32f605a a0ab7b263d98a2acd2ff9e15328d3929b12f9670 a465fad8695777dda10707d9ff62f0518c3b406f a6bb454089ab60b6cc7c43fb11f8f95e93d7bc25 a85f3b5520e8789b1c441aed2e43e094f02a74e6 abb706d75548c5a911f41a5bd3db4c422261ea9d abd04a2f9affd28055ad0f28a2053dae80332e4c ace3ecd06eb7d94ca7536410a6d98116c62df230 b418001b54c97c1dd65d066368a7b4ebb2c4db69 b5d26cf674af8bdaa809aeef595b32cce36a1730 c0a61dad3edbd7f65255cf69946f1edd25ef0ffb c21d5580b1fe85de7a1a40271fda99374a481717 caca31883f129b40fc63ab7ea0a8c38abd33259e cf0ec535a5310dbdcbf940e31998ecbdab3eb8e7 d5d37ba3716be5fc8f0d5f744d2c7dc461b0f4fb d7b6c2b87049f3ac2a3705fef545b8ff7c25dd6f d95cac8504a52e0036b81c6c1650f765fa4a5421 db363d4831ced0c051af892d84e567f73320d7bd db4c59b4ea16554c0e4ebf94bbe535bee906827a e1f7e6dcb11d1313177bd19df211002667ae3014 e2dd334e39003dc07961df4863adaa3c54d218a1 e37c1f7a7d55c593fd3fad9de497d86fb5e98959 e382694558b063fc078dbb6b0d381730057c7887 e5150b86a9e2331ebe7006d6e00a49e447f4752e e576f8c9eaee796ee0ffa8a1e9d306b72b526476 e6e6d3bd0f4532381ba436611f3345c37d6fa5fe eaeee1b386b21efd963a22d17b3af84b852feb67 f36104261801ef9118318480e70c1304459bd8ce f4ce2bb9d79fc4cf073512a3c4d6067db5509b62 f808d1b4b73d66052c6166006f053c52ef64818a fac8f96355475460f0d8a60f0c98bfeae81d56fe faf8cdc7e8f457f0753fd7cf182434e8fb8f39fc
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Multi-Arch: same

Package: libbluetooth-dev
Priority: optional
Section: libdevel
Installed-Size: 767
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: libsdp2-dev (<= 1.5.2)
Provides: libbluetooth3-dev
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1), libc6-dev | libc-dev
Suggests: pkg-config
Conflicts: bluez-pan, libbluetooth-dev, libsdp2-dev (<= 1.5.2)
Filename: pool/target/b/bluez/libbluetooth-dev_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 237856
MD5sum: 833dbd90f039ffb8472424dcad062a33
SHA1: 34e13c5b8fc76d478eb790e56046015e1dbd3a5e
SHA256: c30983ef1702b158df2d1df407bef08ddd2ec6e280d89af5aaf492c2b8a9e29a
SHA512: 73021b288ffd75a187725e8f59646f7aeed7eadc7041f0c337deece07866b0bc4c6d926a79e87f4957066365f8653c370e0d87bd4a2c25f6df5e729fce684352
Description: Development files for using the BlueZ Linux Bluetooth library
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
 .
 This package contains the development libraries and header files you need to
 develop your programs using the libbluetooth library.
Homepage: http://www.bluez.org
Multi-Arch: same

Package: libbluetooth3
Priority: optional
Section: libs
Installed-Size: 307
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Replaces: libsdp2 (<= 1.5-2)
Depends: libc6 (>= 2.17), libudev1 (>= 183)
Conflicts: libsdp2 (<= 1.5-2)
Filename: pool/target/b/bluez/libbluetooth3_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 117924
MD5sum: 0969b63657f960caf9fe051b3621a851
SHA1: 0666c75c98275b544a056ceb2a1fadc3276d8eb0
SHA256: 5e0d7785691b42ce69e4936f97d778dc2017c73aea0345b4e5064b2a89daccba
SHA512: 77d1159185bd119af431d428a3bfe0e84872212298be6093dab0229d31707ac493b9a867aa0a15598a625f965203fe874c661638246159c9f0c6bdef3293f854
Description: Library to use the BlueZ Linux Bluetooth stack
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: same

Package: libbluetooth3-dbgsym
Priority: optional
Section: debug
Installed-Size: 173
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1bv2023.0cb1
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/b/bluez/libbluetooth3-dbgsym_5.55-3.1+deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 134156
MD5sum: b157005eb58ffd347961f99c817d97b9
SHA1: b44628e126eadeeb25c2b587b4a4f553da8bedad
SHA256: 85ec567541a5e3692a5ad07bd2e68869eb96fe29908954063129644c59d6a738
SHA512: 029e1f8057da4c427125da8e3f8fb120f97ae34f477ccd6efbe4c477618c4fd6890c21663b00557f7de1a0d9c9daaf4e3a6d097953519131d39f7ff64f27100a
Description: debug symbols for libbluetooth3
Auto-Built-Package: debug-symbols
Build-Ids: 4645395c2d7f88e285ed22dc549cdcaa3dd0cab3 e5a5eb066c1bc4f523fd6d47cb6f17cc55641f8e
Multi-Arch: same

Package: libcurl3-gnutls
Priority: optional
Section: libs
Installed-Size: 705
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgnutls30 (>= 3.7.0), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-gnutls_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 325880
MD5sum: e3827727e64ccc5559694770a2012739
SHA1: 62ac4cdefcc64818b787865f953ae385885f8638
SHA256: 47ebdc96fc05b390967861e35f7d270c04fb425f81cbecf6a1c93a530533cb37
SHA512: aa7c0e6b386f13510f30f6f44eb9d8ebb7a4854e546a6a7ab86f333af5a6d870fbd07958f132db6e7dd855d72991c8ed518452a49229c5488513a830ce61aa1f
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl3-gnutls-dbgsym
Priority: optional
Section: debug
Installed-Size: 884
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl3-gnutls-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 817496
MD5sum: 2c9d5c41731eb2b19983e00db5c68fdd
SHA1: 37a67af98a6591c1b754f0e77722a2ad8cb64837
SHA256: c225aecf133289de1700df858bd75e6f83e85a1d391e0000f0392e64ca21f9e1
SHA512: 6a6a51d46a32f5413a144a34e792d9f19c9e2e29136f9dd36c50f684951cc7e5b56c10e61ef0affa9258177afc659f1913934a20547ad2d3356b0083eb352552
Description: debug symbols for libcurl3-gnutls
Auto-Built-Package: debug-symbols
Build-Ids: a153e19356845f20936a27d6d7b7370a76407a48
Multi-Arch: same

Package: libcurl3-nss
Priority: optional
Section: libs
Installed-Size: 725
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.44.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-nss_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 333500
MD5sum: 63c380b4b249fd01d86ad6a1686bf4cf
SHA1: dcccadbc6d2ecdb643b8a411586ce1022350bb83
SHA256: efbcbdecf5910b31c59d6a566e166401c7999c4837bf21de57cdeec320cfa397
SHA512: 3660e5bf8f1bf69fada63e7f85203d12dd62196bac7a583a04ee78144113a81561d4de7dac0a4ad05d3d68670bd97d373ace72807218e17216e54733c7eb203e
Description: easy-to-use client-side URL transfer library (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl3-nss-dbgsym
Priority: optional
Section: debug
Installed-Size: 925
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl3-nss-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 860096
MD5sum: 36c63f0f45e4d371b66fbde8c1ea7533
SHA1: c77815105add0be2a2128029d47f6e944245a5d8
SHA256: 2d4fa1d2aa83199629262428909eb09e747a3cae9ed0137f45c559aa2ef23065
SHA512: 5ae6de1d5632b715b17b51a05a26419f562bf2f362c96078d9598003f933c6d0c89a7875ecc565ca18d06c11d452a091f86bb1520e2d10666212bbfd45062130
Description: debug symbols for libcurl3-nss
Auto-Built-Package: debug-symbols
Build-Ids: 0a1dd59fccb44fbf07945ecfec2720bf4776e527
Multi-Arch: same

Package: libcurl4
Priority: optional
Section: libs
Installed-Size: 712
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Filename: pool/target/c/curl/libcurl4_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 328212
MD5sum: a6108f216d6ee6d38d69f544e4aab394
SHA1: 51cb123a27708d5973de287c1e2d145536af5b39
SHA256: 96e6eb0657ec7a7e9eb0ea240ad8024b51672fe80eef65b42ded1ead4499a0a8
SHA512: d1fcb435ac456b2bb7683853b4514a2180775523135e08c5451b252027ff191c79f627fd11ddbfcb94fb7d56fec79b2fb594b266aabea588bec290c0e66a2d7f
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-dbgsym
Priority: optional
Section: debug
Installed-Size: 905
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Filename: pool/target/c/curl/libcurl4-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 836320
MD5sum: 73335c841bd8e68a16cf94a9b726b2f5
SHA1: b5ce02f2e0da5b4bd6601088436015428dbb90b2
SHA256: 7b044f5c6785512081617757b27cc7a7daaa0ba68dde5f0f2bc0e2c8ece91fbd
SHA512: 421930e1ba6f775170461a0ecd4eb4fa5d28a830344b1286434bb8ef0f8cc42e3aaa4e98eaf747d725e3347da8edee10ee3ffba5c9f660d979aa94ba59ede8f3
Description: debug symbols for libcurl4
Auto-Built-Package: debug-symbols
Build-Ids: bb59d21b6706a5dc28eb4e229567eb34ca2c202e
Multi-Arch: same

Package: libcurl4-doc
Priority: optional
Section: doc
Installed-Size: 1944
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: all
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Replaces: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Breaks: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Filename: pool/target/c/curl/libcurl4-doc_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_all.deb
Size: 1014952
MD5sum: ad01c7962e62d32da7b2650b0b7cdcb3
SHA1: 9e175562966da7faf2b835e44903b5f7f2392cef
SHA256: c0ee51006250943deb17aa666bd881a82844531518a15593a6636b2f7456c968
SHA512: dad84f31de73b7c7e1e29816329777e7c4642a78164ecb73fcf7ecbc20b6e7763cda34a6699af967191f6e592bfda5e837ea2b37e2a7faee7a64efba3481bbc7
Description: documentation for libcurl
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the documentation files for libcurl.
Homepage: http://curl.haxx.se

Package: libcurl4-gnutls-dev
Priority: optional
Section: libdevel
Installed-Size: 1556
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-gnutls-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 426968
MD5sum: 923ce9bf174beb669ebbe56842ee52d7
SHA1: 6bf18ea3df2a18e8fe111ed9a6deccdd21eca7b1
SHA256: 61bed6e5d56db99b143cec049df83377c2868c7eaeed76d6235ffc9a10c1d442
SHA512: 8e971585811994f9b09c658498ee292bc01d132985e4ac3570ae9acc241b842b864115b49fd2b66a6cf3266ba644ac64d5284720b71869e785f72aa88a5acc47
Description: development files and documentation for libcurl (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-nss-dev
Priority: optional
Section: libdevel
Installed-Size: 1578
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-nss-dev, libcurl4-dev
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, libnss3-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-nss-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 434896
MD5sum: 559f28230af89c3a81baa3e6edca79b9
SHA1: 5a64451bf269bb082a415fadcf211438e322ca55
SHA256: 6123a110afc329a7dbe53c9f588b74b002a3554fd35f6a077ca895a152c84c1d
SHA512: 4b9f8c0622c1d667b3ef05ccb82a0b9bc82385278cb7fd90d135a16fce48f136b873e1bcb2a7237933e28d4b286a1b51312ecd32fbce542888a47d52b8d387a4
Description: development files and documentation for libcurl (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-openssl-dev
Priority: optional
Section: libdevel
Installed-Size: 1573
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-dev, libcurl3-openssl-dev, libcurl4-dev
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2023.0cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, libssl-dev (>= 1.1), pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-nss-dev, libssl-dev (<< 1.1), libssl1.0-dev
Filename: pool/target/c/curl/libcurl4-openssl-dev_7.74.0-1.3+deb11u11+apertis1bv2023.0cb1_arm64.deb
Size: 429848
MD5sum: c0e7271747789950da6cd435b25bafa2
SHA1: 3d3083148679b93f3c0166e80b81e3dcf29a6ad8
SHA256: 0a523b058e3ad7ce2cc9df003adad7b42bd042114535a2a14c6dcc0819ef31a1
SHA512: c1f92e7c4ba873001d786102e3b6c06af7887b19e5a2fc23259339427cfb54a1a75db1b04916e1ae4cff315e9d6fcee009591670ef2329bca926a7e2a7fe7a41
Description: development files and documentation for libcurl (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-0
Priority: optional
Section: libs
Installed-Size: 3227
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 2263676
MD5sum: 2dbcd53212b292f0398a2542ce93b697
SHA1: 87a576e225c38d32d23e314fd5ac5149a18cfd25
SHA256: 92b4242100be9575b28531645050a0b2e3d3c6a6dfe302a839afbb3286a8675f
SHA512: 314f796aace758b5638732587d55e1fba20d2b78895a27f735190b247d2673378c2ceca7729b52f1d1458aed5c2aaaacc06447d5e9c30a230cd9425949180ba0
Description: GStreamer libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains shared GStreamer libraries from the "bad" set. The API
 is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-0-dbgsym
Priority: optional
Section: debug
Installed-Size: 1420
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0-dbgsym_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 1189632
MD5sum: 5da4ccc32c7d3c34c2b4c19268e00bd0
SHA1: ed622128cdf0e014c24d59909bc49d040185765c
SHA256: cea5400a00f4502528a8de6ec3b465f85e5fa474ab73f12c9ff04f0acc227c5e
SHA512: d3cb30bf2f66506910c1f3c4f43036f411ef56c1d3f34c1b358a76e7efb91dadc83ce01a115981b097c106c102be95577b6a91f73369eb81f9dbd09763128d9c
Description: debug symbols for libgstreamer-plugins-bad1.0-0
Auto-Built-Package: debug-symbols
Build-Ids: 03378945470344b416baef751f7e7d6e66785a08 116dfd1fba2b5854bca0c4d22630ff999b964e0c 17800b07d6b705d6e1da8d86748eb462e4a9a7c3 2dcfd0e876e97bfe29bbb19875f8b41916e0e45c 2ebe0093aff80775234b9446c876e9f7b0897b20 46e4fbea088ff998709852d611f02c05b8e64c4c 9a47615371530f761546fecc030374818e01ee4d a1f6d0b14a5a722e6d83b36d2ad32020946d7971 c06dff5afa02ee743480e3e1dd0aa5271db248d9 c28d6942d852f0a9bba2c44a627ad878d9fe932d ca04cd471ac9d9384887a0577c2eb9ada22fc19c ca7dd0e31430abb699246b62fd592737cf42e0fe d26dec8a7cce4f96ee4eac2c42e72909a92d1f12 dfcefe44dbfa18891697d464f49918075d28bd7e e693abdfd1a0442af732f28cccda3a8345f61e48
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-dev
Priority: optional
Section: libdevel
Installed-Size: 3500
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2023.0cb1
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1), libgstreamer1.0-dev, libgstreamer-plugins-base1.0-dev, gir1.2-gst-plugins-bad-1.0 (= 1.18.4-3+deb11u3+apertis1bv2023.0cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-dev_1.18.4-3+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 2075328
MD5sum: 7460f9c40eee4ea68b2724e389f410ed
SHA1: 3c70b022f70f4e71f5ea5136b687525dc9766a22
SHA256: dbc9d2e6bceeb08ce017cd98dae9a6253d4994526433e59a34938d19c2ed20c7
SHA512: 4921b7fbb9389a2eeece0ab866111cbfcf45b0290423936698620bc86cabd371b69a02d0828fe599ad397ea0f76eec123d96a538d739fc64d6374256c563c903
Description: GStreamer development files for libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains development files for GStreamer libraries from the
 "bad" set. The API is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-18
Priority: optional
Section: libs
Installed-Size: 27211
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libatomic1 (>= 4.8), libc6 (>= 2.29), libgcc-s1 (>= 4.2), libglib2.0-0 (>= 2.47.1), libicu67 (>= 67.1-1~), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 7002168
MD5sum: 883a92d9be2d039f21ea8c8a56116fc8
SHA1: fb7cc433c099d858518601a799fd1cb237da77ca
SHA256: b9725aecc2105b8632979a03d1fa19ba4f71e97eb98f9e4e3fdd8664bf664268
SHA512: b0890da92be92d56c2e3df85e216d6eb3597d12c55c0af28598d4bec70223db777b7fef7fc7c1631d8a8b4a38c05bb1eaf2db4916f38afc53a49b23decdb9edc
Description: JavaScript engine library from WebKitGTK
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-18-dbgsym
Priority: optional
Section: debug
Installed-Size: 38094
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 32806636
MD5sum: e49f658386f6f3a6d5834a91b3b4d22a
SHA1: c308c15af68406babaef658bfb4aca9bff70576a
SHA256: 2d39b9a641059dc2cbe3a014ffeaca56cb8c61695637b0a1ec6e9294e9c2a804
SHA512: c6c38181d74bc988ea1fbce565ccb3f423b0df57bfad4d3a7ed7a3b952ab00ea7fef3ea7972ea0d65bdf25d9b2e9e2effbdebf7daa0e06a9cbd3c30d0e1ca76e
Description: debug symbols for libjavascriptcoregtk-4.0-18
Auto-Built-Package: debug-symbols
Build-Ids: 03c77451dd917f37f7df05e25b937b0e38233dbe
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-bin
Priority: optional
Section: interpreters
Installed-Size: 745
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libc6 (>= 2.17), libjavascriptcoregtk-4.0-18, libstdc++6 (>= 4.4.0)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 299316
MD5sum: d78a1fac36aa9a71b47986fe508bb94f
SHA1: 8ed38ac57682bf5c04a056670bf09b1062a3b3fb
SHA256: 7a0ce2c0101a2662ee057e733600d54a33790c5750decc30045b507427a276dc
SHA512: 71098c79e1036eea42fbeef2589f25e0d7ab15ab55cf44846126b824a52052d75f87e92e2a86c3b20382577ac0a8b0cf0acbecfce5fadf2ad0d9a7a0d14961f8
Description: JavaScript engine library from WebKitGTK - command-line interpreter
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package provides jsc, a command-line JavaScript interpreter.
Homepage: https://webkitgtk.org/

Package: libjavascriptcoregtk-4.0-bin-dbgsym
Priority: optional
Section: debug
Installed-Size: 533
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-bin (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 450564
MD5sum: 76a9f164c775993621ea2a98d94740a8
SHA1: 7e2daa3d3483816cdcb4f573e248c7f6a0d4bdcc
SHA256: f740c5f91d314c6380ec3d6e8eeb86a950877245506cf0eb2023254ca0366884
SHA512: ffddc5a29d51b85df5841a9a74f80ec6502685f87d3af40a54b226644b79de9ee344b585da6838e26a5435d12a84f9361d6f2a7d93abec6c47e69c2590a86094
Description: debug symbols for libjavascriptcoregtk-4.0-bin
Auto-Built-Package: debug-symbols
Build-Ids: 8eac8aeb1dcb142ed4d2fcedf460f0976ea27e34

Package: libjavascriptcoregtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 885
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libglib2.0-dev
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 244152
MD5sum: e4588732f4a3e50817adceff827fba00
SHA1: 314f33c440adce7c992e26573361e9cd74bd4495
SHA256: bc9c83e8fdb99e1451c34fe92026553024fa6221be33be5fd7c21a0ca0e08bc2
SHA512: 6842022404a5d3d4a43fcc140ca49522b9ab7f0b220812c1163be36e9f943da6408bcafeb2122c398d30499ab0533e882c59c77308c6939a9b8d35fa55e26963
Description: JavaScript engine library from WebKitGTK - development files
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libnghttp2-14
Priority: optional
Section: libs
Installed-Size: 223
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/n/nghttp2/libnghttp2-14_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 77128
MD5sum: 389e6531615916e8d6e438a5276772bb
SHA1: eebe431cd10240c14761bef1521e0958fbfbbcbe
SHA256: 92b310a9278cf9573dfa41adaa6572872dfc7c825c5a90e575a8440ed5a9d640
SHA512: 1ffae5c99a977ecfd3fd22ab257c93fee2141c585b5cb406d8b760f95fe5647796099695431c137cc940b2ad5e625f75c857f58484604a4b7d614ed3b6fba43f
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/
Multi-Arch: same

Package: libnghttp2-14-dbgsym
Priority: optional
Section: debug
Installed-Size: 249
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/libnghttp2-14-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 217148
MD5sum: 9933925f9134be437cfe1593b5d6688d
SHA1: e81531684400bb44f4f89920aa1920f67ee859a9
SHA256: 9c9ee365a5c53d5e766ce1628002e44d28653575a1b4b52b26f42089c31403f0
SHA512: 3cb846f48382039c137c40b260b27706d35b5ce85c6f001f375a3f71beb20c1430b74c52a69862bf1cec9e4128e1b41ce200aff487f7e8d1baf156aed6a82fb9
Description: debug symbols for libnghttp2-14
Auto-Built-Package: debug-symbols
Build-Ids: d2c22a61dc1e75be4a04e4cbf1ddc7f9d054a198
Multi-Arch: same

Package: libnghttp2-dev
Priority: optional
Section: libdevel
Installed-Size: 537
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), pkg-config
Suggests: libnghttp2-doc
Conflicts: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Filename: pool/target/n/nghttp2/libnghttp2-dev_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 114664
MD5sum: c7055cf87a59c8bad84dd925b74649cd
SHA1: 2c38d771f0be884aedd6b6bbb0e502db72089bbf
SHA256: b2f68e4eaaf5b6cf1e999df20838b688087bbddcf325af0a5c0444486648fe57
SHA512: 61b987145d0e21fd2d21e1390460c17628e2cb6bfdf5177afa4eb350ba3680892134be9f6c22ef5cfbe3642713b3cfa0041dd7718cd0b8cfe9154a3da9350d8f
Description: library implementing HTTP/2 protocol (development files)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs development files.
Homepage: https://nghttp2.org/

Package: libnghttp2-doc
Priority: optional
Section: doc
Installed-Size: 10333
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: libjs-jquery, libjs-underscore, lynx | www-browser
Filename: pool/target/n/nghttp2/libnghttp2-doc_1.43.0-1+deb11u1+apertis0bv2023.0cb1_all.deb
Size: 2956896
MD5sum: 3b2b04c2ce21355a378a07fb62846bef
SHA1: 45830e16d0c82013e34514466de326f7e0b4c9c5
SHA256: 5c0d51bce0d30cda1616238f831625daecb12f5d4173e925944c86ee4335e48f
SHA512: 9f5463c6f6cd3cb59fdc0d2f78c2ee0290e2c8995ab33b80ead6befc519032f395e086cb86cc6d6b0a3e64492f3bee551e8c507a38329d4b2869d5502f6d144b
Description: library implementing HTTP/2 protocol (documentation)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs documentation.
Homepage: https://nghttp2.org/

Package: libtiff-dev
Priority: optional
Section: libdevel
Installed-Size: 1170
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1), libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1), zlib1g-dev, libdeflate-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Filename: pool/target/t/tiff/libtiff-dev_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 407408
MD5sum: ce7f29a2aadbf460c0fe6b915e6053fc
SHA1: 0cee97382c7def1da98e520cdb509366c2eb8840
SHA256: e227914d10042fab30b48c73ed69a3b75ee84964db26ae32e4788bf65b077a35
SHA512: 053b18868ae2a5c61d39f60d5c36f806fa9fd08ce370fb7e3b5f6cfa1859786f25879d59f3d898bd4f23cb9ccf5f4f8582e0f7b28851ecfa82e245cec697f694
Description: Tag Image File Format library (TIFF), development files
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiff-doc
Priority: optional
Section: doc
Installed-Size: 1324
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: all
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Filename: pool/target/t/tiff/libtiff-doc_4.2.0-1+deb11u5+apertis0bv2023.0cb1_all.deb
Size: 439204
MD5sum: 3ed2761cb0fa0b68c12d509167c61d62
SHA1: 854674936041563153cfa72c72bd3b8e587c9006
SHA256: f1d79b19f14c16b81a4568ac82532d390509a5952d74b97b9bc2aaa630e801ce
SHA512: c20a960b55e3ae8ce4e46abd452268c2497c25b5be164534cf950a7e72046082534db022a2acf86863336d52040a7e93db8a5ab24dc70703284fd49b08699f64
Description: TIFF manipulation and conversion documentation
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 contains documentation.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-opengl
Priority: optional
Section: graphics
Installed-Size: 157
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: freeglut3 (>= 2.8.1), libc6 (>= 2.17), libgl1, libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiff-opengl_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 135648
MD5sum: 350f8e99cd8a755493974f128dc9f7b3
SHA1: 70aa00435cd2edba7ad1f12b8a0891e5ae838217
SHA256: aefffb8e33c6a825ff85805a03d2de7196ea690ebf0a9f52d3b6b618052a4b3f
SHA512: 9b00a1cbc3cde4001f19daeb4b25b402798a795eafa22df8eb1d2c18418a9b940a2965a107342036aeb8926d316c353a7b06f1936697674fe7b95e9d569d9da3
Description: TIFF manipulation and conversion tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 contains libtiff tools that depend upon opengl.  It complements the
 libtiff-tools package, which contains the libtiff tools that don't
 depend upon opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-opengl-dbgsym
Priority: optional
Section: debug
Installed-Size: 31
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-opengl (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff-opengl-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 15084
MD5sum: f8ff684cb61216fa1f64d795aa67d67e
SHA1: dec3e79cbdd6381c24915476970bf2218afdfc41
SHA256: 777a1bd8c96505e7592518e82c65c1daf5c7baa3d496f4447dd8d9b175439786
SHA512: 74e17d60242e8cc92886ad8514aee345a6ab9b1ceee936126649ddb7b8679666bbbd4406701231f08ec8201d118c046565ed59d58aad2e71745fe2eb2c67dd0d
Description: debug symbols for libtiff-opengl
Auto-Built-Package: debug-symbols
Build-Ids: 3510676e06b0fd38c889718e8a600fcb4ad3cb4e

Package: libtiff-tools
Priority: optional
Section: graphics
Installed-Size: 694
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.17), libtiff5 (>= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Suggests: libtiff-opengl
Filename: pool/target/t/tiff/libtiff-tools_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 310272
MD5sum: 6baedba9d5ffef706ab8d21828fb7928
SHA1: 9a3b6093b417514c74bf3a67915c1ab1deac3921
SHA256: b7e830b25fa8830888262adead8fbc05fc3188bc2cbbe88983a88ac1bcc8b7ed
SHA512: 82a0b5f5a97bae0816b75f7750602d7cc6f771f6c2499e68c525bc640ae4ea2c1c1bae2dd3d0be058c10fee0faacfb6669563c85e92563f69e32a7364773e495
Description: TIFF manipulation and conversion tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes tools for converting TIFF images to and from other formats
 and tools for doing simple manipulations of TIFF images.  See also
 libtiff-opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 598
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-tools (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff-tools-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 420472
MD5sum: 88afb3a4e4588ecac3d1cb7883bc970f
SHA1: 257fc85e79199ba1824431632cd46d892a106f14
SHA256: 591c27bcb44ee41057024e6b741ac9a28215b11d665ae5255d214ce174a63826
SHA512: 14d1d26a34cf1da997e9ec61c65974bcd7eff1224ddb709fbcc0b7d1e7f4e7a15c155ee2df31bc1665f6b2be0503c315b24f8e9264ed899c4df6f18d3fe984fb
Description: debug symbols for libtiff-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0f0dc0c7f1bff8c2deb1ef7164a88c2e8b4c8310 15beb469a42c6a0f104970b0a8044b576df989a6 21e4b712fba4114d877bc29d095bc5550fbc464d 430cab8487e619c3775999e7eed24bf4bae7f89a 4972fbbbc84e6671d3e0789ec56b129a540ae618 4a4836653025b35d7fb10a7c98e97b9e4e6f73e7 6d0672a7eb054636165d381566bff81d0fee9755 97b37adb0710d1e7d182999072c001ac74c40573 a4cfbc13ad5a781fdd793757e3901193da45e959 ad82b61165c154bbe3bc4cc6f2e91553fb8f8ed1 af7288291980ca9eec20a1438e3800f55c5a8454 b6cdc69b2d45620dd214ed92f4e85bc37576d4e1 c7dfd72ce81e89faee973fb880dafb495966a8c1 e22ce222eea0adf96801db4a3824d1ddd231855a e8a913d4a8b7214556ce3b2fdb365951bb6dc0c1 ebddedde9454e7936b4d20d73ac9fbfba76e97cf ecf276da643ed13d69543c825527be0b375816e3 f45a8e3c9feb1143d797640f2eec4251939deaa1

Package: libtiff5
Priority: optional
Section: libs
Installed-Size: 666
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.29), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), libwebp6 (>= 0.5.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/t/tiff/libtiff5_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 279816
MD5sum: 507429f6f23a8d95158eb793654ed5eb
SHA1: 150998505d01c7619258088f13ed9bd19307c537
SHA256: cd35b1242b7cd85939bd1de9a46f264e6cce813e3bd6fc5372579796c1251b51
SHA512: 5454e701e81d81310df9a7ef992e5e0668cdcf938b7ac77f85368ca451f9a420f910fe8cc3e887eca37d345683a849fbd2fb47f8feb95c1f0c393aa9ff13605c
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiff5-dbgsym
Priority: optional
Section: debug
Installed-Size: 483
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiff5-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 441220
MD5sum: 10a2e248af1073a71e76512eec05ce96
SHA1: 084f5e67c246bc2f6e7efcc8aaab0c2db6e98179
SHA256: 6d4be650e0f8a72a06b9e6e3d95816292d301d9b74872188393df43a51331995
SHA512: 87fa7cd06fa7e2b3cc2b429e741bb83704d697e56f8566ab4f1eb3539e68061c139d1181e424d37c6b856e1cfd1481b50c8daad8dd7bbaa2d5046fd86893b28e
Description: debug symbols for libtiff5
Auto-Built-Package: debug-symbols
Build-Ids: a82c5fa8e91847ad2c4bd324615f8c64bcdbb6ef
Multi-Arch: same

Package: libtiff5-dev
Priority: optional
Section: oldlibs
Installed-Size: 131
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiff-dev (>= 4.0.10-1)
Recommends: pkg-config
Filename: pool/target/t/tiff/libtiff5-dev_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 127500
MD5sum: b52f3e778bd2b143156bc4bf88f5b552
SHA1: a24cf34d745e3042aa57f53a9e7872f8d1dd66b2
SHA256: 5164bf4930e92bcc7decaaf23e7c66e06a07ef8c376795714f27bf195eb51051
SHA512: 6b81c55cb30c29ca4d7d522b183ca8b378fb707eee2a47377e91ed3a1911ab4f74591efecba61985ae82e25700f606fe6979136cae5c53a8b41070cc6c7f92c8
Description: Tag Image File Format library (TIFF), development files (transitional package)
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
 .
 This is a transitional package. It can safely be removed.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiffxx5
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libc6 (>= 2.17), libstdc++6 (>= 5), libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiffxx5_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 130908
MD5sum: 447ce44b254ed9addc4304239abf3edf
SHA1: 818e20b9e3db32119f160e51c73adfcef30f3489
SHA256: c9b37e0f75e3a510c3278a93f1904d55afb61ed7ee9ad42bdd775041ab74bfbc
SHA512: b61e235f9df07efc966b603e286e77140903e72412fd0e7c766fc4b08a8194743797db6a53f2c2fd484980c88fe516ba86f71e1ed687678197528302c4204779
Description: Tag Image File Format (TIFF) library -- C++ interface
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiffxx5-dbgsym
Priority: optional
Section: debug
Installed-Size: 36
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2023.0cb1
Depends: libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2023.0cb1)
Filename: pool/target/t/tiff/libtiffxx5-dbgsym_4.2.0-1+deb11u5+apertis0bv2023.0cb1_arm64.deb
Size: 21692
MD5sum: 9f53a74fa1b2474c4d3898228c4e2879
SHA1: f723e83a63c25fe00af9a88d64795b0d5f5b4fa1
SHA256: c445a3eba588c0abc848f21ff269d766575dba9bc99548984dff0ade9c5f8c16
SHA512: 7e7f0727a85192aff979249ed454777b003a7330bb9ed89463c0175b5f4fa595e0c1aa340119dbffd9d1c4bf27ab0a4040d9a4b881fc556d15c1f255ebf2290f
Description: debug symbols for libtiffxx5
Auto-Built-Package: debug-symbols
Build-Ids: 5e3111c66473dda915f8dbbf99cfd3c5a17f30ae
Multi-Arch: same

Package: libwebkit2gtk-4.0-37
Priority: optional
Section: libs
Installed-Size: 74078
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, libgles2, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.30), libcairo2 (>= 1.15.12), libepoxy0 (>= 1.3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.8.0), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.61.2), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.16.0), libgstreamer1.0-0 (>= 1.18.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.9), libharfbuzz0b (>= 1.4.2), libhyphen0 (>= 2.7.1), libicu67 (>= 67.1-1~), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libopenjp2-7 (>= 2.2.0), libpango-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.69.90), libsqlite3-0 (>= 3.7.15), libstdc++6 (>= 9), libsystemd0, libtasn1-6 (>= 4.14), libwayland-client0 (>= 1.9.91), libwayland-server0 (>= 1.3.92), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwoff1 (>= 1.0.0), libwpe-1.0-1 (>= 1.3.0), libwpebackend-fdo-1.0-1 (>= 1.8.0), libx11-6, libxcomposite1 (>= 1:0.4.5), libxdamage1 (>= 1:1.1), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.2.2)
Recommends: gstreamer1.0-gl, libgl1-mesa-dri, xdg-desktop-portal-gtk, gstreamer1.0-libav, gstreamer1.0-plugins-bad
Suggests: gstreamer1.0-alsa
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 19246984
MD5sum: 5ca905668b4280369a8bf2d12878e4f3
SHA1: 593923b452722658cb7ea9ee5a5c3bd6b4fd1c0c
SHA256: 859afa6251df9c5a57af07737013d07572b0f97dc97d067676e2d11d460a25ce
SHA512: 81d0fe14cf5e61df00de4e37f1a5b95b65df29615df2eff13c358325d7b4ad511ae375a2114bf2e7e72d71cc6f28f22799c7db003d520b0a8e45887b8103953a
Description: Web content engine library for GTK
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libwebkit2gtk-4.0-37-dbgsym
Priority: optional
Section: debug
Installed-Size: 132412
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 106100416
MD5sum: 8771a3ee89c8e2707febd4c4d5c77dad
SHA1: 952cd8ac47f8e1d68e24e88fc5345ca5083cf119
SHA256: 28e8282d620b0de82fdbfae525f2d7810ecd6ed22f2ed76f0dc842487d016431
SHA512: 2ca1a80192b8920a6bdf42a8800ab2194e6cd48dc023fcc450861a9061f30e5ff1160a9572a79287a41aaa64f03534433f827e7ee52810e0d92ad4513c353e93
Description: debug symbols for libwebkit2gtk-4.0-37
Auto-Built-Package: debug-symbols
Build-Ids: 48d38022d6957015a0d748bbcdc1349e1ec18f42 73c574481789e1df8267f30df5ecdc8d449fb0ec 8c65c6bdcb48ba5d2d197a8384d06232b1915ff4 9f682a3b7890d0a7686dfb2a543747f0a349f345 f8e6b79bb19304e0d1ff89fd5a51ab3704ae6c80
Multi-Arch: same

Package: libwebkit2gtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 5588
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), gir1.2-webkit2-4.0 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libgtk-3-dev, libsoup2.4-dev, libjavascriptcoregtk-4.0-dev (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 461504
MD5sum: e97d3ca8911046b4d1b6eeaa6a56e8bc
SHA1: 05a006f08d3690b0d7198a31e5d819362d42e2c7
SHA256: ed2f1e877c887a2c2ba64f9d37de8cedd355f24c119cd661cea4c4e61d009d4c
SHA512: fb15415d15167ef2ff08aa9a2e40c10f8156280ae385ccb918ee24332e1841d893d96331302f43e5d8f4a17921aa7f58bd3d215d1332042c72a6ae6d4475ba49
Description: Web content engine library for GTK - development files
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libwebkit2gtk-4.0-doc
Priority: optional
Section: doc
Installed-Size: 35746
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: all
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Suggests: devhelp
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-doc_2.42.4-1~deb11u1+apertis1bv2023.0cb1_all.deb
Size: 1069820
MD5sum: 47290fb6e624b39547fdb6497d2b8fb4
SHA1: c96a137cef17b7ce44da25f125c4862a0f136683
SHA256: c8f865eb83173e77e8e1c0b2e388941b7407fa9b3a71bf448d0562f6dadeb6c6
SHA512: ec2fc626844274e9fdcd579fc71cfd69b508d9493c3e8170b1962b7b4d9b57a056f21addcc4ab0fb351475e25d0954f3fd1a7a64082a342fc9c5472ccb4996e8
Description: Web content engine library for GTK - documentation
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package contains the documentation and is valid for versions 4.0,
 4.1 and 6.0 of the API.
Homepage: https://webkitgtk.org/
Multi-Arch: foreign

Package: nghttp2
Priority: optional
Section: httpd
Installed-Size: 34
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-client (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), nghttp2-proxy (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), nghttp2-server (>= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2_1.43.0-1+deb11u1+apertis0bv2023.0cb1_all.deb
Size: 17280
MD5sum: ce1e04fca9df87c3e7af2358ae6e0a37
SHA1: 09abc4f938d97e139a9a4772559edc7399d09102
SHA256: 8b5b17e550fd75b26ca9c5246d746a2e25765a54ea822fde6501976e550b8032
SHA512: f9f991167e05529ebe169a8f84824f62eb2c26bcad2e9ab27e623e0780f357cbc610654175ff5b64ad2274ce95d8cc59b27a129e48bb9bfc62ae7089fb137988
Description: server, proxy and client implementing HTTP/2
 This package will install a set of programs implementing the HTTP/2
 protocol: a standalone server (nghttp2-server), a reverse proxy
 (nghttp2-proxy) and a client (nghttp2-client). It provides no files
 on its own and is not necessary for these programs to work.
Homepage: https://nghttp2.org/

Package: nghttp2-client
Priority: optional
Section: httpd
Installed-Size: 521
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, libc6 (>= 2.17), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjansson4 (>= 2.0.1), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 7), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-client_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 156080
MD5sum: a5d95ff1368384655672eea9680f7d02
SHA1: 085fe2901f3ef0f4934a29fd77d90a0b5fac6cd4
SHA256: 9ef9d66482e95cc4787b9712a3a2ec4ee21badbdcadba550d4f7574ef57c2fb1
SHA512: 5335457775d1df790a882770a8b396f2954f0c3b872b475d3fa507283718344a52615ad3057a8da448db54994a1d9bde421e6f153df7ff838a02b77564a38ed2
Description: client implementing HTTP/2 protocol
 This is a command line client implementing the HTTP/2 protocol. It
 gives access to many low-level and advanced aspects of the protocol
 and therefore is useful for debugging.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 1968
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-client (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-client-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 1863240
MD5sum: 25b20b7d9406aefe57ec61222362d181
SHA1: 34d96f16d3e1e027e6eb99044bc0d58247ffafae
SHA256: b055321850365f072936dc1cee19311e1abea370f65e9a4e096195b9fdd191e0
SHA512: 278c586b03d9c381410cbc67901015992cf949a9efd11d579b650b6e266a999cea072dbb723abc8b1085762c3d9bab0fdc9a2a85bec62b88f563b3394dbc4914
Description: debug symbols for nghttp2-client
Auto-Built-Package: debug-symbols
Build-Ids: 8f3981280b6ce791f0839172ec32c143dbdb1e66 cbda7effec09ed996e7c872ea94313caa04863fb

Package: nghttp2-proxy
Priority: optional
Section: httpd
Installed-Size: 1024
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, openssl, python3, libc-ares2 (>= 1.7.0), libc6 (>= 2.17), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.1), libstdc++6 (>= 7), libsystemd0, zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-proxy_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 350800
MD5sum: cc556e8b745f3a1fc11696e29c3c9a5e
SHA1: 2dff73b9b7b64163354cb9f11455bf88c226d161
SHA256: d74908761fdc6ac4e38b9eaa2bf60abb8b2708fc1565664c2cbf838f44557dc6
SHA512: 3390a4662c4cba38f87f099e8d590066bdebef850c0ac2d564213a78c5f96ec3ca1808928db03e0656382ea844ba0ac6c5eb206370c557bc27e1b9d15ce88a8f
Description: reverse proxy implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 as a frontend in front of web servers that do not support HTTP/2.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-proxy-dbgsym
Priority: optional
Section: debug
Installed-Size: 5292
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-proxy (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-proxy-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 5169056
MD5sum: 40c57166149a503b6bb493f7df3b1102
SHA1: b97ff1e9aad7d7255428fdb0bff5c49d38f8ee3a
SHA256: 9fccd9aac09aa6b2487cfa6de301b6368c8f213801104c62cd25c3ed0176594a
SHA512: ba9d712d94f562c1de39989cec8b9b1d8dbaee3b402658967d28bedda21365982928c37191a8b67809796ec05a71d67111a577af5e206147383917270c5df5ff
Description: debug symbols for nghttp2-proxy
Auto-Built-Package: debug-symbols
Build-Ids: 9c53cc214c4dcc6ba5f0e4c6969af0ab70a22a92

Package: nghttp2-server
Priority: optional
Section: httpd
Installed-Size: 249
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1), lsb-base, libc6 (>= 2.17), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-server_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 95360
MD5sum: 4dd362c33e0377c15987ce7b60076a17
SHA1: 4873f08052039e7c87a631d6d0db716796fed901
SHA256: ba50b4ab0b543a17e4848909b9ae1d4d9927643b4c3d6bf66d282dee4560cc58
SHA512: 1ad1e9265ca508383dce5b3d9cb90531bf5d61e146d1f9917153e728a02edbed72182cbe451c198f38a8628fbc00321117688edce13a96a4afc55ff2a50562e4
Description: server implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 to serve files from a local directory.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 975
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2023.0cb1
Depends: nghttp2-server (= 1.43.0-1+deb11u1+apertis0bv2023.0cb1)
Filename: pool/target/n/nghttp2/nghttp2-server-dbgsym_1.43.0-1+deb11u1+apertis0bv2023.0cb1_arm64.deb
Size: 933076
MD5sum: 99acf8db3e1dde098036281901bfb154
SHA1: ddd1c992da5c7d09ee42c8fe9e701a7374d1ecce
SHA256: 4e7ffb1010f5b46aa88f3fd40a72674c3c2cc0c22e7fd711b4e8766f0acbf1fa
SHA512: 91384257c036ae51a40a7a332124c2225bcb20280c92af8090aa82c281b35720817a399047bf2cfe8ec3175abbe412c25690b79695ce433e381708e7994b9db7
Description: debug symbols for nghttp2-server
Auto-Built-Package: debug-symbols
Build-Ids: e6dbf2d6c4f6af0b09bcc4ce802fb0b2451983d7

Package: openssh-client
Priority: standard
Section: net
Installed-Size: 4292
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.26), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Breaks: openssh-sk-helper
Filename: pool/target/o/openssh/openssh-client_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 898300
MD5sum: a570e4d01d4b4460dee46df4f90be0c5
SHA1: 869d36b787397a4238d55ffaad2178d7920e555e
SHA256: e0c24dc0cc306701a6af94c8158e7bbc2e5e0885a67d0f5234949c1d019adb0c
SHA512: db4a00f51b9350d1a0649c5f90e032c6f293228c28003b44afc3cefbebd054d7e686726fb11fb2b7369a8c8ddc48be469c72f8ce8e2b36fb055fc47fef7e26af
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 4340
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-client-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 3918984
MD5sum: 07db0d4ae524ce7488cbf3469522b131
SHA1: f574689aeb21279ffe1d6f69f3f5cc3fe8972bad
SHA256: 46ff0f6503b0637a5b86cae09a58ace8c756ba5fe48d4494caed28f5353bd8b2
SHA512: fec185873115f455b86635203347388213eb0b03d6daffffd11ff47f13bad3997363b970d5978b0ec7a681f350b21608d0916f1ddf11dd02fe233852bafab435
Description: debug symbols for openssh-client
Auto-Built-Package: debug-symbols
Build-Ids: 28006d2413649cfb178263bca5e05698c6b8f209 595922af78bf36c7a13cd916eac4efc4c8c8e064 649a928b701d387115bf3df9294980a4cb1271a4 6f28436c4c885e62474544f1efea701ae7a18e6a 7482098a7319686bc7b947e9402d2fc96d399738 871bb1ae2e74b0bc5ff9e8a581e0cf47b3e0bd4c b75074471cc47e4ed14ae6be2f36740689f0d50d d9342799aaeabf3f764042ed0e55e347477f6480 df9c96c0130aec1886ad0bb8e78d696c5cf66f51 f48ed94cf87965025a5e2c0995e92c2f0d6dc066

Package: openssh-server
Priority: optional
Section: net
Installed-Size: 1549
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.26), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), libsystemd0, zlib1g (>= 1:1.1.4)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Filename: pool/target/o/openssh/openssh-server_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 362672
MD5sum: 9968ac1b2239f4f1c83d3903efae7131
SHA1: 57cf2d9461954f3b848b3c76546f577c25e871ad
SHA256: a9759662f2f6cc4b1468bba047baa0621ec3124e4769149886bf6c06f0b858c4
SHA512: d7b8b26bee1494f0265d1c96cd959c42da60035eda2f2afde45fd7eeff1811eb1a40bf5982c60a162f0cbe0ad7e804c03f807280eb29f14fa19f51e990be865c
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 1132
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 1044996
MD5sum: b1a05d9df7fcf1a3194d2b9945299a4f
SHA1: 5ca4e399aa3cb5620c868f01d7cf14da7589f992
SHA256: 33259a6834efdb890d1680f715cb7f0b1f6a563db1a9697b15b5491125b89567
SHA512: 5864d5b53b20a12c3d354d9dc755400d9ef2b9e11cf3c80a9d0683efcdc38f6491bdf830edbc15a792d57a445a206567a3dbaa8ce90e845184c7c1f943a8c5fa
Description: debug symbols for openssh-server
Auto-Built-Package: debug-symbols
Build-Ids: cd6c0a9a7e01677d35b1f64c2513739571af49b0

Package: openssh-sftp-server
Priority: optional
Section: net
Installed-Size: 153
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), libc6 (>= 2.26), libssl1.1 (>= 1.1.0)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Filename: pool/target/o/openssh/openssh-sftp-server_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 50696
MD5sum: 6bee651bd4e287aa9794620999051583
SHA1: c9247de6d2e2343bfa1393d3e1c2bdda77513d6a
SHA256: f1974266188604d5b90ff3bf9f20f8d6e49fa36818cc272be0f0910f0ffc13ff
SHA512: 51102935ea5b1a58edb95c6869e52927dc33d80330941756a7f26fca19b604e4b7de85f6a456332073b4a4dd02f783a455de00b40aac923147a970f8c37fa081
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Enhances: openssh-server, ssh-server
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-sftp-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 193
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-sftp-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 164084
MD5sum: 1988a445564eb6e6f3f03d7dd8b23a10
SHA1: 567b58275cff827726af3d0cc10817f152bb6239
SHA256: 7adb35867348e9b1085a57dea713d5effab233dfdaebdc7d42733307a08d49e8
SHA512: 4bf41af1e217881ee19810a12fc81adb3a2824f760d11843bd2aa84d0f603595cf52a94a86b86590e43a74a1095caa1c8a17bfbb3589949d70ed34ceb7298bea
Description: debug symbols for openssh-sftp-server
Auto-Built-Package: debug-symbols
Build-Ids: deb9f27c80adb5d3961ce73118727706f3d06e3d

Package: openssh-tests
Priority: optional
Section: net
Installed-Size: 5355
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssl, putty-tools (>= 0.67-2), python3-twisted, libc6 (>= 2.26), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/o/openssh/openssh-tests_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 937336
MD5sum: 3d4d489643e98b09c03ed2597d34cf24
SHA1: c1954b9be30be00d067e015f3e24b5d1cfa9f6be
SHA256: 6429daf1769b20ddb8c214682fc4dcf436107b7244fe9f65635fda5939e572d5
SHA512: 7ab7b88f86e6606b8dc4df58045bbfa1fcc31486aa385dc3b585aa4d0210440ae8a129dabbdb2e07930e16b8461ae2ea98b72c770f0d961126638233c2c62e58
Description: OpenSSH regression tests
 This package provides OpenSSH's regression test suite.  It is mainly
 intended for use with the autopkgtest system, though can also be run
 directly using /usr/lib/openssh/regress/run-tests.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-tests-dbgsym
Priority: optional
Section: debug
Installed-Size: 3092
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-tests (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/openssh-tests-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 2686512
MD5sum: 7fc73dfd923c094dc6ba5726dba5d7bc
SHA1: c599ea2ef453bb0f38b7f602f82ae6a5584af869
SHA256: 88a308322374da8da3f9b4411a38af90141a46da35e7c0a78f4e79a29fd58b53
SHA512: c85fa941aa6c809ffe9eea95648d4e1ce66b62426fb11d8885793bd392624b6736e53521a892bbddd8caaf3eb0043d5a4c214c50031c3cd9d3c3c4310ef22085
Description: debug symbols for openssh-tests
Auto-Built-Package: debug-symbols
Build-Ids: 0439198e5b9c37928c725b4205d5bb19644c819e 0ed323c82fd364fb9259dce87dd37d1b569c0b5e 11cace2d9257fdfa6f6f552f10cc5dd24bb029ee 2189f149e0646ae3b2bc7ac4eaca4f270911e2f4 338e8d7f769f77318fa14bdbf46b5b4ab036b40f 4080a7afa4d891471fdf36d1c420aba29c556780 41814426208e8c47ebe6d8c29b003dc8594b625a 452f2d4576378b742e756c399b5d2d45d1d46555 7b06bc93abde91570f8ff7cd251b88707b05b923 a62a1f6ac829d5ac85f350e2f115f68c280e3e80 b05b905cc45b29bf5ed0139273d0f7b540ff88c7 b3226e357614514f78aaf27b62af8a31a08cfe34 d98d934b597ba24fabc2561f88af96e35ca1bb77 e31e1ca87ef910278c2c8eb52ce8febf77b6a6b9 f4b9d88980ba6862be7db7de2ee262f51ccde257 f7b2406f061e58c0264ad52b763e8d037cd4fd1b

Package: ssh
Priority: optional
Section: net
Installed-Size: 270
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: openssh-client (>= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1), openssh-server (>= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Pre-Depends: dpkg (>= 1.17.5)
Filename: pool/target/o/openssh/ssh_8.4p1-5+deb11u3+apertis1bv2023.0cb1_all.deb
Size: 259448
MD5sum: eac6ed65b4214e84a6a8ceb62a30f378
SHA1: 998a5235ce3c9e7046f36a977ec7952114e673bb
SHA256: 3bbbca7ee560cc04b016ca839fb188ea1cad689e7d0f40638faa654bcf7df9af
SHA512: e575e1c2f07d73fb2d626eb76a5d52543168264b0a034e45ab9b5e5f023bf5ee14d8400bdde83c8547532fe363db2e968100b6de84bbe9f81b5583e8c7b5702e
Description: secure shell client and server (metapackage)
 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: ssh-askpass-gnome
Priority: optional
Section: gnome
Installed-Size: 299
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Replaces: ssh (<< 1:3.5p1-3)
Provides: ssh-askpass
Depends: openssh-client | ssh (>= 1:1.2pre7-4), libc6 (>= 2.17), libglib2.0-0 (>= 2.12.0), libgtk-3-0 (>= 3.0.0), libx11-6
Filename: pool/target/o/openssh/ssh-askpass-gnome_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 272568
MD5sum: 37cd5825099061b4bbc7e27fb9db9a81
SHA1: 8201c4974669b6fc6e7b756ea1e93efbf4b91ea3
SHA256: 8c5834a1a130759e3bfa8506dba1def511329cdc176e3bae5322d04424aaaf41
SHA512: 1e0ce9f7aca0e9f8238c43054237a283ffb9a74a175d9d38fbba269c03eb3fe128388d36890d4b54dfa0e739e0b1d3909bc749911292fbdff72653331ff13b71
Description: interactive X program to prompt users for a passphrase for ssh-add
 This has been split out of the main openssh-client package so that
 openssh-client does not need to depend on GTK+.
 .
 You probably want the ssh-askpass package instead, but this is
 provided to add to your choice and/or confusion.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: ssh-askpass-gnome-dbgsym
Priority: optional
Section: debug
Installed-Size: 29
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1
Depends: ssh-askpass-gnome (= 1:8.4p1-5+deb11u3+apertis1bv2023.0cb1)
Filename: pool/target/o/openssh/ssh-askpass-gnome-dbgsym_8.4p1-5+deb11u3+apertis1bv2023.0cb1_arm64.deb
Size: 13004
MD5sum: 04bb2fd9f499fa692629c90fef797d4b
SHA1: 444b56f0e0c622ea3cba24f77a0c0ca85175c0ef
SHA256: 24597e2fa6af800b2e57964541501405b609e73b0327a0771a2c02ae0d5a712f
SHA512: 79abc9e0da483557bf6338b20745d17194f10ff72e8486c3fe81337d3e3dacf9c7b785cd563932ef6b394da5a0da07b4054d80ea5c3ca338277e34f5f57dad9e
Description: debug symbols for ssh-askpass-gnome
Auto-Built-Package: debug-symbols
Build-Ids: 27524297ee77213acfbeb1d5ee009915f73d5752

Package: webkit2gtk-driver
Priority: optional
Section: web
Installed-Size: 2187
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1), libatomic1 (>= 4.8), libc6 (>= 2.29), libgcc-s1 (>= 4.2), libglib2.0-0 (>= 2.39.90), libicu67 (>= 67.1-1~), libsoup2.4-1 (>= 2.47.4), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 744132
MD5sum: 5d46ec1eb7c2552433e43e421a26a1ce
SHA1: 6e3e1f4fe65b00cff657514f0e2da9f60ceff8b2
SHA256: 77bf8122c36c87b62a3ec8ff9784f6390dcdb401f67b9e6ff14837a7fba6c542
SHA512: 16e7af53c1128666b82bc3f5614c4f8d6404c01d1cf46a73f131d5bf2e7ce9b1869ca16a6fdcf98d2c9a7b9a85ca6ba4fc12fd794aeae6b7b527745910433806
Description: WebKitGTK WebDriver support
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package provides the WebDriver service implementation for
 WebKitGTK.
Homepage: https://webkitgtk.org/

Package: webkit2gtk-driver-dbgsym
Priority: optional
Section: debug
Installed-Size: 2378
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2023.0cb1
Depends: webkit2gtk-driver (= 2.42.4-1~deb11u1+apertis1bv2023.0cb1)
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver-dbgsym_2.42.4-1~deb11u1+apertis1bv2023.0cb1_arm64.deb
Size: 1904968
MD5sum: 5ae3fb8156975d931d9d3dcc2f77fb09
SHA1: 0d62a3b71ea05b80454947ace3e6ab149329c936
SHA256: c061774b159497c3ff7d8229271c8ede85707f031d142ce77f9f50ef714d9621
SHA512: f4965a5896662e9cb8a119a7705f68eddf8879aa2b4bc25b529d53499cfe8f9eab8228935ffd17e6501c68c31d4ef2dec0a8e3f416050bf63b919fc8fcd9ad48
Description: debug symbols for webkit2gtk-driver
Auto-Built-Package: debug-symbols
Build-Ids: 15827281ba6a0607e56aceb7acf5c4535ea0509f

Package: xdmx
Priority: optional
Section: x11
Installed-Size: 4117
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfixes3, libxfont2 (>= 1:2.0.1), libxi6, libxmuu1, libxrender1
Filename: pool/target/x/xorg-server/xdmx_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2950248
MD5sum: f5bf54ab6d9496bde78b40b3272b53fb
SHA1: 9b6178a2ecc419962838c2a996d7422daceb6292
SHA256: 3c0dacb43f2b4ebe570256cfd8c90d6737a601b39d42d8d23e6c2810d084e070
SHA512: 2ce331557b05e78cbfd4288e2b85a443cedebed34568b11eb5d7f188b86ce89b4b2f08bd602b793c7dbb11cb47dae738a35a86c36d9983d6de86c956c139e6fa
Description: distributed multihead X server
 Xdmx is a proxy X server that uses one or more other X servers as its
 display device(s). It provides multi-head X functionality for displays that
 might be located on different machines. Xdmx functions as a front-end X server
 that acts as a proxy to a set of back-end X servers. All of the visible
 rendering is passed to the back-end X servers. Clients connect to the Xdmx
 front-end, and everything appears as it would in a regular multi-head
 configuration. If Xinerama is enabled (e.g., with +xinerama on the command
 line), the clients see a single large screen.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xdmx-dbgsym
Priority: optional
Section: debug
Installed-Size: 3078
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xdmx (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xdmx-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2919388
MD5sum: f43208def50701453e328fffbe2066dc
SHA1: 7e072b293e0c4af6fac571034506d55f18b477b8
SHA256: 6b0b968a857c960fe58138d6210fa8ee07b2567d279d811ccf02c60cae31c61c
SHA512: a4ee3a447aa03c522b7d2ef0151b550180bf4f27b1c24e8c1f7031e3d798cd8e0532102b46304a920db99faddcecf64de6f9d658a8d55c26fb3b9e4260098f51
Description: debug symbols for xdmx
Auto-Built-Package: debug-symbols
Build-Ids: d0463a373606d86187b4059f9236b3cc3d2c5573

Package: xdmx-tools
Priority: optional
Section: x11
Installed-Size: 2550
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xdmx, libc6 (>= 2.17), libdmx1 (>= 1:1.1.4), libx11-6, libxaw7, libxt6
Filename: pool/target/x/xorg-server/xdmx-tools_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2324828
MD5sum: 462322e8d52a5ffe5919530160d9746c
SHA1: 5a9a6e5d0547a6291a070dfd05d97ff3cfb7f5fb
SHA256: 7864c1000c6078ab38b67f27ee7807fa626453ae9839420a91294fb6078a5ce5
SHA512: 4dfb6e8f27b75a0fbd7df9c667b06c0add6ea58c4b6dc3d95d25160d9a5ce13c5332dddeaf6ee9a7489ccf9d701fcdbb40eac10ac6c978a157659d7b8d1dca24
Description: Distributed Multihead X tools
 This package provides a collection of tools used for administration of
 the Xdmx server; see the xdmx package for more information.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xdmx-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 311
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xdmx-tools (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xdmx-tools-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 199324
MD5sum: 483e85ac612f32211d8a7dcf0486f218
SHA1: d9e41928ff81c2b840dfd1541b7a6c508b9f6019
SHA256: 1fba767b8563ac1d3a17446cab14426457d32773a347a7ed351ad41f40a3a982
SHA512: a8b3ed91ae518b8de1663a8fa51fd2355dc05fb51d927031e902275e12605e0815854629d4a133ab924a897b0067a7c400d855f398b061541951c35d7aa6b3f8
Description: debug symbols for xdmx-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0dd2e5d72765518c18ba7926191455599853ac98 0f7dc07972090aac1a156c410fb2b1a05bbedbf2 1cbc9e188516c82d69bd61bb59a05bc512d00431 29e3201075b5ad89b318e9db651f3fc9e180bf94 4df948704beabf84c35ca875ae0181342328d1b0 7ac802f269aef6bb2f4167929da555b1f729d096 7d30de4b6b5a74824d83ebb3f43701f22dfb5a4f 826a26ed09eacba2d4bcbc9c111eda6e8a0cee9d b190b98ef0b1e861d721b605b3bad051ec349a98 b1a0a7855d3a331aaf66af25a761ab73c8d50d53 f33aa571c5dde8fde69f2a9aefd415d424999c00

Package: xnest
Priority: optional
Section: x11
Installed-Size: 3950
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.13.2), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfont2 (>= 1:2.0.1)
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xnest_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2881488
MD5sum: 1bdec7849a4e28d3c4832c2653f26680
SHA1: f0a9641feb69dde0c52e5976380f2f3314628634
SHA256: caea8654c80fa2002ba60e19b1c33c6cce0698b0b634fedd5f5933c18f8b482c
SHA512: d33fb4463bf543bb43a222ef03fe382b8d4f5a6145c370401139d3afae2fd06f427b4140b761b24c6af1ef867ed3b1e72f2370338a085b243222654444442302
Description: Nested X server
 Xnest is a nested X server that simply relays all its requests to another
 X server, where it runs as a client.  This means that it appears as another
 window in your current X session.  Xnest relies upon its parent X server
 for font services.
 .
 Use of the Xephyr X server instead of Xnest is recommended.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xnest-dbgsym
Priority: optional
Section: debug
Installed-Size: 2784
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xnest (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xnest-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2630924
MD5sum: fd27e8ce0e55799fda805d9f124cc049
SHA1: b16aaae5bd3990a6854c69c6b1cc05290637702e
SHA256: 7c2b75719572d4814b0b55519c1928af6f11ebd75833e6c447f2c79e5bfc289a
SHA512: c97e14715a45d97417720e794e4cc3f5dcdd5eafa61e3117c10f7a0da15354698341ed2ba892b3aae286822b74b022c26867485b3ec46b0a20c25dc5891be804
Description: debug symbols for xnest
Auto-Built-Package: debug-symbols
Build-Ids: 054a9ae2b5fb0148dd1a5968d2cdf5c879900da3

Package: xorg-server-source
Priority: optional
Section: x11
Installed-Size: 7411
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Filename: pool/target/x/xorg-server/xorg-server-source_1.20.11-1+deb11u10+apertis1bv2023.0cb1_all.deb
Size: 7496868
MD5sum: 1980966c0c0b7175134ac9c04be1961b
SHA1: 4064846aeb347d35561e373e3f23e8c2b6899ae6
SHA256: dbcc17f9cf04d30a31e2d4687d987793f82ba6c9a1929d6daa4825ebda2515b5
SHA512: 7de97a8f13f2fb5fa2f9904a8b2e2ecfc4ce27522b459dc43497addb149653ef9a6be929a227b58aa4bf2ec10538e96aea0812a1e8703abb573bfc4740dc4038
Description: Xorg X server - source files
 This package provides original Debian (with Debian patches already
 applied, and autotools files updated) sources for the X.Org ('Xorg')
 X server shipped in a tarball.  This enables other projects re-using
 X server codebase (e.g. VNC servers) to (re-)use officially
 Debian-supported version of the X xserver for their builds.
 .
 Unless you are building a software product using X server sources,
 you probably want xserver-xorg and/or xserver-xorg-core instead.
Homepage: https://www.x.org/

Package: xserver-common
Priority: optional
Section: x11
Installed-Size: 2359
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Replaces: xserver-xorg-core (<< 2:1.5.2)
Depends: x11-common, xkb-data, x11-xkb-utils
Recommends: xfonts-base, xauth
Filename: pool/target/x/xorg-server/xserver-common_1.20.11-1+deb11u10+apertis1bv2023.0cb1_all.deb
Size: 2296156
MD5sum: b42ec0bbf8c9ff72f287614f6d34f339
SHA1: fe96e6d626209ee5cdf8d22cd113a18f3f35df5c
SHA256: b58e0e6af88c4aaea0e257686792a52021d160f0016c59448d85b7dcda807076
SHA512: e08e7e076a44c920bcc63cf5dd3b6945e5cb3d8eb2f2df806ca3a82f81f6d443771402f4cbe6658ae090a660c386873ff480a9db5632d1d73caee75d1985e332
Description: common files used by various X servers
 This package provides files necessary for all X.Org based X servers.
Homepage: https://www.x.org/
Multi-Arch: foreign

Package: xserver-xephyr
Priority: optional
Section: x11
Installed-Size: 4451
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libepoxy0 (>= 1.0), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxau6 (>= 1:1.0.9), libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.1), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-util1 (>= 0.4.0), libxcb-xkb1, libxcb-xv0 (>= 1.2), libxcb1 (>= 1.8), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xserver-xephyr_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 3063548
MD5sum: 6da5ef517897a49b8cfa1f538d843aa3
SHA1: 0ff11b4a29d770a99e239f2ec7a07ac77d608de8
SHA256: 878b66018f904af9feafd3e863d37c22a58ac30a34de60e6bffef07277a06d06
SHA512: c8500b40cc79317c83fa4081d7b610f33d7db06144b3c37e3f770cedd8725f405c7cbb28c1ab6d800c2114e2d4225a5328f9887d2e80315f56009d7fc8c4d3d6
Description: nested X server
 Xephyr is an X server that can be run inside another X server,
 much like Xnest. It is based on the kdrive X server, and as a
 result it supports newer extensions than Xnest, including render and
 composite.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xephyr-dbgsym
Priority: optional
Section: debug
Installed-Size: 3675
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xserver-xephyr (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xephyr-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 3487364
MD5sum: 3eb24b009539c857d3e1858a28a86944
SHA1: 67ee0ce7366f2b3e0ffc94859cd70ca7641aced5
SHA256: 5b1d5a952e4ceceb0c2b3e2984d53da4f0813a16d47678a86a6a9e65af77bc39
SHA512: fb294888cd79ac0ea4c4cc6ca79606aa431addf46ff188b895406074856521f732e4b86d7e31bc9ff3c7e69cc45450aef013c252c15358ff1084a74c5566cc93
Description: debug symbols for xserver-xephyr
Auto-Built-Package: debug-symbols
Build-Ids: 90557f57b04571c38251c439e1e7718252d6ce39

Package: xserver-xorg-core
Priority: optional
Section: x11
Installed-Size: 5737
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Replaces: xserver-xorg (<< 1:7.7+10~), xserver-xorg-video-modesetting
Provides: xorg-input-abi-24, xorg-video-abi-24, xserver-xorg-video-modesetting
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), keyboard-configuration, udev (>= 149), libegl1, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.4.66), libepoxy0 (>= 1.5.4), libgbm1 (>= 17.1.0~rc2), libgcrypt20 (>= 1.8.0), libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.10.2-4), default-logind | logind
Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable
Conflicts: xserver-xorg-input-evtouch, xserver-xorg-video-modesetting
Breaks: libgl1-mesa-dri (<< 18.0.5), systemd (<< 226-4~), xserver-xorg (<< 1:7.7+10~)
Filename: pool/target/x/xorg-server/xserver-xorg-core_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 3445260
MD5sum: 4af9c239f1d5c6f0d7b5b57ad6a0edf0
SHA1: 78199b391b25ffee1588d4cc1e002f109e0dc7f9
SHA256: 7041234a5988fc61cfcd11bd6270c2f6afca0205bfab549a2e8dd74d2f5d56c5
SHA512: c3780eaf80cc48f9a8802efd9d433ac75f0debc36cac272df1aec66275793a62c9590407e66578195d4adce461d40cd431afcbc8723e6043c2246fd16ae6618e
Description: Xorg X server - core server
 The Xorg X server is an X server for several architectures and operating
 systems, which is derived from the XFree86 4.x series of X servers.
 .
 The Xorg server supports most modern graphics hardware from most vendors,
 and supersedes all XFree86 X servers.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xorg-core-dbgsym
Priority: optional
Section: debug
Installed-Size: 5555
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xserver-xorg-core (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-core-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 5179624
MD5sum: 5c09ebcc37a730e82ba691681b37b723
SHA1: bc34d4449d8128dea7efe17727cccdb6ef71e9d4
SHA256: 51edc66306d732377bb17dca7a67fc2a0caa186c6714f43a6b920e7e49727cc2
SHA512: 947fa98d8be5b8e7c9a19eb32899bccf323de927307a35ae8df97b68317e510845543a37885a45b813d70ff67644c4d58056d7083b9267ef4524e7b3e66b49e4
Description: debug symbols for xserver-xorg-core
Auto-Built-Package: debug-symbols
Build-Ids: 1172aec63cdd6419ba8fad30f812f6d376a217b7 288d354e51479923e11435f9be1997966894d333 50a538b606d101ccc477bad918a22dd7c380ff2b 5c1ae8d727d2db5bdc19789647a4a347d1a70e00 62cb6ad6494df24ad4d1c89630929939385c512a 8337a68ce276b8d613a9cd1707536b507e541f1c aee6b3334ea1558aa8e087f88566416684c7ffc1 b214408e86e4344b459650f521c4b9369b53d1b7 c608f17c74738e614e1411757ef6ab157cea1e14 cac59ca4cbd9d6c2bcb7882f69f58dca4670d3aa cf8d02dfddf4c255a959bd9742fdc17eb43539f9 e32bf358b64407c1c4d29649489c91bec4afe1fa e6e2d436fe73fca3f97339d0e79fdec6948f8404 fad831010d5852a8827d95389b2cafab58a6b352

Package: xserver-xorg-dev
Priority: optional
Section: x11
Installed-Size: 3556
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: libpixman-1-dev (>= 0.27.2), x11proto-dev (>= 2018.4), libxfont-dev, libxkbfile-dev, libpciaccess-dev, mesa-common-dev
Filename: pool/target/x/xorg-server/xserver-xorg-dev_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2469692
MD5sum: 29a205f108d325312ca2feee8d2522f1
SHA1: 828d29a3778ccfc6fd6d7d2b63c62abd0381c5fd
SHA256: 09e366e8691c373af138ef08308a7e0343bcd55b62b1e342f9dfd0a3bb468474
SHA512: a459e211cc9a5bee9fccf76db59ea88a8bb137234998de8cc3bb39e9b1fb17b46dfc84946e44e396c10ceaa44b874f765d7b4990f5de935b6026e376a9ace757
Description: Xorg X server - development files
 This package provides development files for the X.Org ('Xorg') X server.
 This is not quite the same as the DDK (Driver Development Kit) from the
 XFree86 4.x and X.Org 6.7, 6.8 and 6.9 series of servers; it provides
 headers and a pkg-config file for drivers using autotools to build
 against.
 .
 Unless you are developing or building a driver, you probably want
 xserver-xorg and/or xserver-xorg-core instead.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xorg-legacy
Priority: optional
Section: x11
Installed-Size: 2387
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Replaces: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0
Breaks: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2301720
MD5sum: 72e3a67ad526a22a995aebf7b4d4262b
SHA1: 81012c5c054c68f16595d49a46ab1654f57fc30f
SHA256: a155cb1a7d45ae1c5b0702e31ad4698e083d4522f14679792feb2ef7ab448031
SHA512: d19aca17e10fcfedaad18150159383ebd8666e2b2de8ea503154c1b057c61e0263d77945219516824e91a02ef8865a38b09c72eb9923ed1efda00e463d9af466
Description: setuid root Xorg server wrapper
 This package provides a wrapper for the Xorg X server, which is
 necessary for legacy drivers and non-Linux kernels.
Homepage: https://www.x.org/

Package: xserver-xorg-legacy-dbgsym
Priority: optional
Section: debug
Installed-Size: 25
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xserver-xorg-legacy (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 9396
MD5sum: 3732c48a5f6e7c6633662deaff9b6bcf
SHA1: bd64aa07a3c82a1c0d7a7b7958eeaba9c80beb7e
SHA256: 92701f18008bd5fdbb8b4ab6d8a37649930ce0a1e8e8ca56bc589e2bcaebfbee
SHA512: b5be7bf93a44e5c3a73399f2efe43413a88e1b225f49a97f82216c9bd0dd3560ace9703a5fbd2e5d7636724556c58d3f58e76105754f2ce9ba8eda2c3ff0f03a
Description: debug symbols for xserver-xorg-legacy
Auto-Built-Package: debug-symbols
Build-Ids: 113751f302d0c0a11bed9d001e27865806f8ddfa

Package: xvfb
Priority: optional
Section: x11
Installed-Size: 4086
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1)
Recommends: xauth
Filename: pool/target/x/xorg-server/xvfb_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2940116
MD5sum: cac9971d56fc53c45b2f10d3c1ea69f4
SHA1: 8155178ad25034bfb48bc24729801ed7bf35e486
SHA256: b1ed9299cd5cde3c4f27af051fd2cb3ae919ec8534f6e278bff2aee1b8b24b40
SHA512: fea756ee2b1de3af72d7f9a9796000d058680ff0e9bbfe2a40fcc3533c713a01934b5b7b22575116d3aa482e6547cea0bc64c41c1cf9f012e41247112fefabd6
Description: Virtual Framebuffer 'fake' X server
 Xvfb provides an X server that can run on machines with no display hardware
 and no physical input devices. It emulates a dumb framebuffer using virtual
 memory. The primary use of this server was intended to be server testing,
 but other novel uses for it have been found, including testing clients
 against unusual depths and screen configurations, doing batch processing with
 Xvfb as a background rendering engine, load testing, as an aid to porting the
 X server to a new platform, and providing an unobtrusive way to run
 applications that don't really need an X server but insist on having one
 anyway.
 .
 This package also contains a convenience script called xvfb-run which
 simplifies the automated execution of X clients in a virtual server
 environment. This convenience script requires the use of the xauth
 program.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Multi-Arch: foreign

Package: xvfb-dbgsym
Priority: optional
Section: debug
Installed-Size: 2983
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xvfb (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xvfb-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2834772
MD5sum: 0dc9a5776f4f4175070b9fd35467f468
SHA1: 7aec5064e10974b830d6155ef0a083751c9673d5
SHA256: 2d42c5ffd231a97ed2ebe47c352b77b99a9821c69f358dfbea85f31a747db5a4
SHA512: 4a84175757f362d4b09d111391c856bd979cd6cc30718089a56a86982333299f206975b80df1733d7445ac333a5523a8709b1c2ae19f9b6ee611fae55d142ab9
Description: debug symbols for xvfb
Auto-Built-Package: debug-symbols
Build-Ids: 2774bcb74f967bc68422555f2438cca8f572e72d

Package: xwayland
Priority: optional
Section: x11
Installed-Size: 4134
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libwayland-client0 (>= 1.9.91), libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Filename: pool/target/x/xorg-server/xwayland_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2949264
MD5sum: ba7b1d7ab5e4a124e12fdb6433c96d3b
SHA1: 609cd34fc617463ffefeb1a4a8165715d9fc505c
SHA256: 006519ffe6d11c5fd73bd5b54e9191c51875a537df88da25febd08e6c9ac65e8
SHA512: fc09ccc06ed2b59758d0123293e739c651f19e06b8847f6265290976f59822ab941e6592c7b2af78164874524326108cd7ab8a21997c8cbf5728642a3c4153eb
Description: Xwayland X server
 This package provides an X server running on top of wayland, using wayland
 input devices for input and forwarding either the root window or individual
 top-level windows as wayland surfaces.
Homepage: https://www.x.org/

Package: xwayland-dbgsym
Priority: optional
Section: debug
Installed-Size: 3100
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1
Depends: xwayland (= 2:1.20.11-1+deb11u10+apertis1bv2023.0cb1)
Filename: pool/target/x/xorg-server/xwayland-dbgsym_1.20.11-1+deb11u10+apertis1bv2023.0cb1_arm64.deb
Size: 2941812
MD5sum: 2e94e1032a8cd93ed52f4b766342ae0e
SHA1: 4c0a9cccfd3ee1fc4ba431fcf3d26335fba1c2b0
SHA256: 480e8ec03984317bc381315a5cd24a67e149052e33b2e6a7bf36bfadaa3d9865
SHA512: d5cf5e807d4acc2579bd52152a2ba5056e26f2b54fae72b2a5fb2e1e0ce144cfd476c61005febdc44cc04f48bde81efc80d4e6e8afe242c55e3536e9de3b68c8
Description: debug symbols for xwayland
Auto-Built-Package: debug-symbols
Build-Ids: 54f36236119eeaaa2f803f836cba5656940af00f