Package: bluetooth
Priority: optional
Section: admin
Installed-Size: 76
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez
Suggests: bluez-cups, bluez-obexd, bluez-meshd
Filename: pool/target/b/bluez/bluetooth_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_all.deb
Size: 50268
MD5sum: 3fa6f5c4161f9df64b21ad75b86e0d87
SHA1: fe38d7929d2c6e7670c5e5e4705eedff63b570e9
SHA256: e2c61c2be3bcce7fd4f9acccc94e4cf1ae03e05babf3ed4d09fde6b0ff43dbbb
SHA512: 7122d55e55f1b7a663ff762d7a796b84bc2beb7353fc8094ed7b19a4378342eeacebfaad8601c2a16f2a1a1644253162589fc49947c99626e8bde7ec72d18f93
Description: Bluetooth support (metapackage)
This package provides all of the different plugins supported
by the Bluez bluetooth stack.
Homepage: http://www.bluez.org
Package: bluez
Priority: optional
Section: admin
Installed-Size: 4092
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libasound2 (>= 1.0.17), libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libglib2.0-0 (>= 2.31.8), libreadline5 (>= 5.2), libudev1 (>= 196), kmod, udev, lsb-base, dbus
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: pulseaudio-module-bluetooth
Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Breaks: udev (<< 170-1)
Filename: pool/target/b/bluez/bluez_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 977404
MD5sum: 20d9cc420d266e8654cbddc0d61f387f
SHA1: 98dd7d193c6e65d8d659b851846bb2686458199a
SHA256: a280021a407115043594651761d966ca76723f4b7b75ade1bedb4414ffb530e3
SHA512: e291964a2ce8b455c78fd17e71290f571f81be6a5f2885fb366f210f6a2c5c5ce966610645d870fb8188252055694c9442ad8c9bce7c2a006c1d8cbac1a7cddf
Description: Bluetooth tools and daemons
This package contains tools and system daemons for using Bluetooth devices.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: foreign
Package: bluez-cups
Priority: optional
Section: admin
Installed-Size: 236
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0), cups
Filename: pool/target/b/bluez/bluez-cups_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 109544
MD5sum: 79ecdc0f827a57f4f4e104a586782114
SHA1: fc9beb844d29f3342d96ba26c31fd87c887c69f5
SHA256: 857c792904fcf39b3950846122fa349a6482b39be79bc69dbf971680522a0e98
SHA512: 09377ff4acbbf44e6edfe699f113f28d0e191f49897d101d08da4fd719faeef31b7a6cbc400dc37817fdb5065ed661baba0f8184df9446adf10593221ec19196
Description: Bluetooth printer driver for CUPS
This package contains a driver to let CUPS print to Bluetooth-connected
printers.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-cups-dbgsym
Priority: optional
Section: debug
Installed-Size: 193
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-cups (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-cups-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 158180
MD5sum: 562d1661bccb4c8843a5c1591b4ae958
SHA1: 3481e3de1b2c2127ab4968a057ac873e94718a72
SHA256: 6ff939b0363452a06708a3a9f55c094b6d37594c4221682c2b79560945f2428d
SHA512: 16e9d1fa181ffa17be6fd9b6cf57afac9e33d74e4197b67cb8fbc39e3f1a2afc101992938bfc7e1d278bfe5ebcbe3491102914cd02d1480a1588463beb252726
Description: debug symbols for bluez-cups
Auto-Built-Package: debug-symbols
Build-Ids: 6725d2c8ca0654902bc2623473a7691078bd2a20
Package: bluez-dbgsym
Priority: optional
Section: debug
Installed-Size: 4789
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 4042860
MD5sum: 2333a883fe32a8f71824455c2c48e6d6
SHA1: 6378e35202ec9adf7886957f774e0054ed4fff65
SHA256: 31852d804e8acde824cd8468459e825b20762534e6fef6ecaece2e7a97d33d62
SHA512: 4a009a6285ed258d83116bd5f350e42054cac2cfe0d6faa36eaad49b4d84d5773fec704c4e9a45ab5e56ba4f468f53a1e7f3103a649ea73081682a346dc52c44
Description: debug symbols for bluez
Auto-Built-Package: debug-symbols
Build-Ids: 02968571d73faee8ad3640a2f9ee4a7d532bbbce 0a9a9652ced93040493e538e089643e173eb4348 1a65fe134b1d6ea3a45fca628b933632013427d9 1bb1ceec6a6aaa682b6ed3bbe9044fd5317c88ce 1d019ecfed18fce01628f0ce7b1131e11e05bfcd 1f977cc56a76c565e02b040fc8172d0c915b642b 299fd2933ad80ded05abaa87baddb7cf56f5c0a4 2b4205394746c80dd65928b186f2d9f31d7db0fb 2c11afc6dfba33a41d8b36f4e11075c09b62f321 40f50d22df55d5a1073cde9254e5252aeebd47bd 536199b0233d071ed75549891f176d90609cde17 8ac918fb3ebdcfddd741db7b70694767ae89dfae 92c98f1bc1ad2e0f72b1701639a574d640166b6e 97e3fe6b98f75389e4f6515113a5b2bcd8070acf bdb6eb015a554e990f818b0ecafca34ee99157a7 ca28ec049caebd4daff5ef5a79e4f4c45d772c7a d51d54ebfce6b161f1efbc229d3d608999a98d94 f4550914516036c4522b6fe5f11025f84250934c f7bb060637b26b70e90a24ee281376d6152c0048 faf28cfeae0bc9155b2bff22cfe95cf35d97192a ff883586e40eb82f670dfb2711babcaf04985440
Package: bluez-hcidump
Priority: optional
Section: admin
Installed-Size: 465
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.4)
Filename: pool/target/b/bluez/bluez-hcidump_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 200036
MD5sum: ebf4634419bbc7d30475859697a7046f
SHA1: cc320c49ab1d860c6c628c7861ec919d2572d8ab
SHA256: e7574e6780bb08e4d7b83afb891ce1a9c94c1546dfd728d055843153783ffee0
SHA512: 0a2211f3b33e755f4802b8b350cea5acd8afc93adcf1786f5db6cab5f80580b8dca10057fd4986cb3621f30a76cb2fc6f5c5a2e230921d3088770f0bc3e2c265
Description: Analyses Bluetooth HCI packets
The hcidump utility allows the monitoring of Bluetooth activity.
It provides a disassembly of the Bluetooth traffic and can display
packets from higher level protocols such as RFCOMM, SDP and BNEP.
.
This was the software that is independent as bluez-hcidump, but this has been
integrated into BlueZ from BlueZ 5.0.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-hcidump-dbgsym
Priority: optional
Section: debug
Installed-Size: 593
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-hcidump (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-hcidump-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 561420
MD5sum: b0be69f02b04a79b31b8fad87e9ba879
SHA1: 7090afc6f35fc0a23b1b97f1a7380199dcdfb572
SHA256: 2ed754cf247e870ea4bb8068eeec65768aae75e106426d7becf9b3530b217dcb
SHA512: a3dde5715e3798ea0ec98488d18da6877bf399909bd25c942ad68c040cc8d3468b72e44e75b97a32728bb45176032d5d315c0bbc0ffc86c86a8a70a5fac7b7d4
Description: debug symbols for bluez-hcidump
Auto-Built-Package: debug-symbols
Build-Ids: 575910b6523f0a9fa2e7680008ace2f2705434f2
Package: bluez-meshd
Priority: optional
Section: admin
Installed-Size: 590
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libell0 (>= 0.17), libglib2.0-0 (>= 2.28.0), libjson-c5 (>= 0.15), libreadline5 (>= 5.2)
Filename: pool/target/b/bluez/bluez-meshd_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 252660
MD5sum: d04c68c6094578351877524d24e23cde
SHA1: 0370d77285a9bde51907ccb63f6fe709da7fa5f3
SHA256: 4f0bbcb8b1ac546c2054c02656eac67a523a615896198ba1d43becc42b199b33
SHA512: 143000195b5352dddf3614354dc6ae6a7d5fb08a7dd17fd344fe7260a9eab1fbfda109cbb5eb620fa546e7e075739ae46257e2f8793f83147ad574df91ddee0b
Description: bluetooth mesh daemon
The Bluetooth Mesh network is a new Bluetooth feature that extends "Bluetooth
Low Energy (BLE)".
.
This package provides daemon (meshd) and tools that provide Bluetooth mesh
functionality.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-meshd-dbgsym
Priority: optional
Section: debug
Installed-Size: 944
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-meshd (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-meshd-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 827952
MD5sum: 9990054bdc4b43ba214982b4a33a54d2
SHA1: 7e4a41bbce5b3f643cb5075e378c93bbaaeb5480
SHA256: 312c47e8da0a52954981ee09b12c5d17bebb70b79902638ab5d4203822606456
SHA512: e73b31dd6d2734fa6c960d7fd9276ef6e52d82919f6d4dab427f4b692141e0db688f2b9b926fc5fab610ba55b4aa2f2dae903c83e2f60520feb27723a098931b
Description: debug symbols for bluez-meshd
Auto-Built-Package: debug-symbols
Build-Ids: 531f3353a07781f68fcf1e8691d3989fedf735a5 6c0fa32b6e6f9fbdb4dd50c3691e8725093ad276 72d09fccd4e9e30f77b287f858e142d3a94f56c5
Package: bluez-obexd
Priority: optional
Section: admin
Installed-Size: 447
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: obexd-client, obexd-server
Depends: libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.35.9), libical3 (>= 3.0.0), init-system-helpers (>= 1.52)
Recommends: dbus-user-session
Conflicts: obexd-client, obexd-server
Filename: pool/target/b/bluez/bluez-obexd_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 202912
MD5sum: d09cf3982e72b1a118adc9bb125ae691
SHA1: 86d0beb7c1bdf780ed5334d67fd563ad90c50b8c
SHA256: 5394e17627124b1b79c0348f5191af1b0bd769709db4c7549491062af83712ed
SHA512: 43dfb9352844d6c268ed1521cea8749b27748a51452bc4cbe201c3fda5a347e1572dfb34de31a89103443924cfd27c0b70b682a0dc0294dcbd46e06c2d3366dd
Description: bluez obex daemon
This package contains a OBEX(OBject EXchange) daemon.
.
OBEX is communication protocol to facilitate the exchange of the binary
object between the devices.
.
This was the software that is independent as obexd, but this has been
integrated into BlueZ from BlueZ 5.0.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-obexd-dbgsym
Priority: optional
Section: debug
Installed-Size: 574
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-obexd (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-obexd-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 491168
MD5sum: da6cadd42ccbb5871ecf214224bfb209
SHA1: a613248a95cdceb74e9316993a2fcacc7de3d1b0
SHA256: 860b60833ad52cc362d0efb3019ff35defa43131cd2f70f2ea58d36f22ee336b
SHA512: 144fea8d3f658f337f6ace9a4a78c6cd07f1551011a49decd48c6f9e32b3599afaee5572d81ec7f80e1ec598c230f1a64f255dcf856e0972ce894192579c1492
Description: debug symbols for bluez-obexd
Auto-Built-Package: debug-symbols
Build-Ids: 24cfa16c1d2aee9caa49885ef10c45054805da29
Package: bluez-source
Priority: optional
Section: admin
Installed-Size: 33004
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Filename: pool/target/b/bluez/bluez-source_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_all.deb
Size: 33710408
MD5sum: 62e9e71181b504aef7db6f22198aca36
SHA1: fe5f2161e878a5e0e71b3596afe924e6cd68abd4
SHA256: 4e2da91132010e903259310044735b635134c6d66d2c97497cc84e4b734c2ee8
SHA512: 86dd661ea9cb84b9004f3e7cd6c1e94504a893f91024bd2236632d97168d5a08b5989ce56edb72ea79c47b34eb9f1df8a812989edddc6124b368c9e08821cac0
Description: Source code for the BlueZ Linux Bluetooth stack
This package contains the sources and patches which are needed
to build bluez.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-test-scripts
Priority: optional
Section: admin
Installed-Size: 297
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Filename: pool/target/b/bluez/bluez-test-scripts_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_all.deb
Size: 83588
MD5sum: 4b34808d0634f5c67613b3497df8e3ef
SHA1: 47e265f9eb7360839493b9c4beef20404985d81b
SHA256: a356c219a5fd3650de1c2871d4d574cd953431004d7cfe6316884a45cc0cd30f
SHA512: 55c991fdfb3deacedc6e51794f37f1a2b1cfc3198ce7106897deeb19d3eb410b4939182da86a5ddef6856b77fe7a1f23da4cd28be8084344f996971c264f9bbe
Description: test scripts of bluez
This package contains test scripts for using BlueZ.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-test-tools
Priority: optional
Section: admin
Installed-Size: 1996
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.10), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.28.0), bluez (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-test-tools_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 285332
MD5sum: 739cc2dc5f724b4b1ac19bdff27af2bb
SHA1: 3a2760a15d8bdabc9f98736b3e088d8567ff9e1a
SHA256: e726a22b73559f729b0ed29f279b9af11bff4ede10eafdc2cfcd8c32c8f93bda
SHA512: 7cbfb64239bbb41da980f925104e2037c682a10c87491c33a0404c1446653f51c6ae9b604225ae592e83254f8c68c1b4c88a53d21080d2f4b9c6390dc899d616
Description: test tools of bluez
This package contains test tools for using BlueZ.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Package: bluez-test-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 2283
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-test-tools (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-test-tools-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 1849832
MD5sum: 4cbe30c6caaaf02288311dbc47266bdb
SHA1: 252abe72355a4df9cca867b64898fb95085a9adc
SHA256: 1307e866f6dda5f0cd0bd90ae444ba8a57b64f01318625dfbc794f1fcf1d1b2b
SHA512: b44bc382123d663dc0d4ec0184266a191268cd9aec130dee7361d56f8554493e913df09ae7af249db0b4c8cd96d6bba67edfdab165514ab1a59c934f01340c62
Description: debug symbols for bluez-test-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0c3430d0ab856a9797650457be9650b7c82eb1e6 101b6b50cac4cebef3835d8772cd557c66c2fd1a 52fd5722e2a1fb39ce86900014cf0a39afecd174 5e9d6c1687258a7501fad65cdacd5a89b7a98d5f 8e9c6d26c81bf03199d16c188966811dd0a5ffe7 8f905ac9e7a866eb084d74586ac0ccb1f1aeb19c 94c6f33a590a28251bc1f33265692647f97dbce7 c2f41d62c54f56142a4fbefadf16e52dc49c9527 c950a524d6a516e685d01437fcb126daba11ff8f dba05d9ba1e6981e02588be1d5cdb7922d225666 e78a0e32bd31134bf3698535b956393b8ca97abd fcf1571198fb439ba56d06c936c0e82759a00e75
Package: curl
Priority: optional
Section: web
Installed-Size: 363
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libc6 (>= 2.28), libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1), zlib1g (>= 1:1.1.4)
Filename: pool/target/c/curl/curl_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 265280
MD5sum: f833ed95bda76fb672b623cd6200a934
SHA1: ab2abced77e3d86c8a964feca11d12ea09f5cf75
SHA256: 18206ba6afd884ad4af295eebe437f7193b57ef1e1e2097c48ead1535ead4247
SHA512: df10c13b34225dfbed993a5ece87b908dbc019c3fced09bcf08b511ac93a76e145d98ef7deaa0f5e02092b32d7d4097c621c21c767b636eda1443bcd0334abce
Description: command line tool for transferring data with URL syntax
curl is a command line tool for transferring data with URL syntax, supporting
DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
based upload, proxies, cookies, user+password authentication (Basic, Digest,
NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
busload of other useful tricks.
Homepage: http://curl.haxx.se
Multi-Arch: foreign
Package: curl-dbgsym
Priority: optional
Section: debug
Installed-Size: 166
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: curl (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/curl-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 141560
MD5sum: 457d4ba285f0ccd8a72faf5b303ec56b
SHA1: 0f79b18f63039f87c667655fa0080156e5bbabf5
SHA256: e986ef1364a6d7323ffce4ce983d87adef3a3d3e920b86d8b9c571d88e171d6f
SHA512: 5541391d64a2966d00a697c3a0e35295497143b97d2ecd9d0d627839eb43f1c219d960c5798a54a839f2d665608908a40a7fa068fdaf5150b63f0398f8969ca1
Description: debug symbols for curl
Auto-Built-Package: debug-symbols
Build-Ids: 73639ae7e5d5444c9c7697abba9992ff658d5f1c
Package: gir1.2-gst-plugins-bad-1.0
Priority: optional
Section: introspection
Installed-Size: 2074
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), gir1.2-gst-plugins-base-1.0 (>= 1.18.0), gir1.2-gstreamer-1.0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (>= 1.18.4)
Filename: pool/target/g/gst-plugins-bad1.0/gir1.2-gst-plugins-bad-1.0_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 1955624
MD5sum: 86c42356a981b33e6b8d53c5bd6743f5
SHA1: 7009079d020f918ac09e7472ae0ba3620bd427b0
SHA256: be1df53198d9d4c536ef3559dad4505161e94cdab96c2744866de3342e658d31
SHA512: 53969eb721f674712517a6c6cb0b013f90642dca84d50a3198fbe7703d82471b562e56e3e7ef540fc72bd83dbfd6f7bd2e41927036ac6df07dd4360c3b21396b
Description: GObject introspection data for the GStreamer libraries from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains introspection data for the GStreamer libraries from
the "bad" set. It can be used by packages using the GIRepository format to
generate dynamic bindings.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: gir1.2-javascriptcoregtk-4.0
Priority: optional
Section: introspection
Installed-Size: 469
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: gir1.2-glib-2.0, libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/gir1.2-javascriptcoregtk-4.0_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 213828
MD5sum: d70bfe7c9f0965e1eb158800add84436
SHA1: 4f39b70dacf7f4051cab5ba8c2166fcbc51c04a3
SHA256: 1c8c46b7f7ada9c4ad28b763d3735796ab242f4706bd33c07436c5724466101f
SHA512: 382d0691e42405417cc563174e049c0bd5e17c2eb2686c9b6184ab3a8fc8639ed6ef37cd0cc92650b6c67d29f1fc963d7a837c6538fb405deaf7eb3d3f125cbf
Description: JavaScript engine library from WebKitGTK - GObject introspection data
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package contains the introspection data, which can be used by
packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: gir1.2-webkit2-4.0
Priority: optional
Section: introspection
Installed-Size: 762
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gir1.2-gtk-3.0, gir1.2-soup-2.4
Filename: pool/target/w/webkit2gtk/gir1.2-webkit2-4.0_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 266512
MD5sum: 68674a38641f7aa74e2961a31882d4a8
SHA1: f9fed2f685db686d6ac4b6abd5248896385a34df
SHA256: 2317448340db55ac695e140e263e631638415d0bfb3841eae9277c08f377f108
SHA512: 09dc02248440425b5931dcb46831b1bdf9e0a9a4be2e4dda94c37ae37b6fb68fd838648e8a41500b0b72832767ed957bac5627bcebe8c6448895f59b584ba913
Description: Web content engine library for GTK - GObject introspection data
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
This build provides version 4.0 of the API and uses libsoup v2 for
the networking stack and the GTK 3 widget toolkit.
.
This package contains introspection data, which can be used by
packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: gstreamer1.0-plugins-bad
Priority: optional
Section: libs
Installed-Size: 6230
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-plugins-bad-faad, gstreamer1.0-plugins-bad-videoparsers, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization
Depends: libbz2-1.0, libc6 (>= 2.29), libcairo2 (>= 1.6.0), libdrm2 (>= 2.4.47), libgcc-s1 (>= 3.5), libglib2.0-0 (>= 2.53.2), libgstreamer-gl1.0-0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), libgudev-1.0-0 (>= 146), liblcms2-2 (>= 2.7), liblilv-0-0 (>= 0.22), libnettle8 (>= 3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22), librsvg2-2 (>= 2.36.2), libsndfile1 (>= 1.0.20), libssl1.1 (>= 1.1.0), libstdc++6 (>= 4.3.0), libusb-1.0-0 (>= 2:1.0.8), libva-drm2 (>= 1.6), libva2 (>= 2.2.0), libwayland-client0 (>= 1.11.0), libwebp6 (>= 0.5.1), libwebrtc-audio-processing1, libx11-6, libxml2 (>= 2.9.0), gstreamer1.0-plugins-base
Suggests: frei0r-plugins
Conflicts: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1)
Breaks: gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 3452040
MD5sum: 97e0ba22c9aa1aac01fb34dbbda4c49d
SHA1: 82af73e677d489b7e46c87e3708e1ec587f4ad63
SHA256: 2559943a0d2a361af4f02dd687e9bf9c31a6a54cfb143f2ca4372ba6e76f9b0f
SHA512: d862a0a893802c567467b0ab4e3c2fcace7f6ea6f53d42d4cf456f6fc4d4866148cb6ebe7c88b1595caff2b587e9cc5540d78ed580766f5128a16982ef07ab9d
Description: GStreamer plugins from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: gstreamer1.0-plugins-bad-apps
Priority: optional
Section: utils
Installed-Size: 1965
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.44), libgstreamer-plugins-bad1.0-0 (>= 1.18.4), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 1933576
MD5sum: ebd0462af58b275f774ae050aae1619e
SHA1: 4c0c6c75b6c9e7f34aa262cd6afca09ad98f9d9d
SHA256: 27b1b14248d2430b9cfab9e65dc86efb79b9ee5bac82921baddf6ead095fc974
SHA512: ff0c3193e908786a519f09529d465632e4708e283ceb4b912610e1a29d2dbd2ed8d04a94b1df29a79dc450ef33148821cec580b0958c01fa8d1bf2427858819f
Description: GStreamer helper programs from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
This package contains helper programs from the "bad" set, a set of
plug-ins that aren't up to par compared to the rest. They might be
close to being good quality, but they're missing something - be it a
good code review, some documentation, a set of tests, a real live
maintainer, or some actual wide use.
Homepage: https://gstreamer.freedesktop.org
Package: gstreamer1.0-plugins-bad-apps-dbgsym
Priority: optional
Section: debug
Installed-Size: 36
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-apps (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps-dbgsym_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 19888
MD5sum: 1a98c185d97ef9adf4e9c41783fd4cf1
SHA1: fbd0fd92f9625e92d836b996163b32fe366ea2ed
SHA256: 2606fed730f1097fc0d63a0d5a147828c212f18b0fe14774736611d67eecc82b
SHA512: 7a60ba711c695d4147aa2bbe1af27b799cd7efe9db4b6e0d91b6a56f4d61b5fca3d660fdafe9b6a5fe02cc86ce095ae1d325ab88017103a2b06c878ff4ccef36
Description: debug symbols for gstreamer1.0-plugins-bad-apps
Auto-Built-Package: debug-symbols
Build-Ids: 64db39c586727389e8cf31bd291511af454174e0
Package: gstreamer1.0-plugins-bad-avtp
Priority: optional
Section: libs
Installed-Size: 2017
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Depends: libavtp0 (>= 0.2.0), libc6 (>= 2.7), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-base, libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 1955664
MD5sum: 29ac5d4acfa6fa0f3a9ca1f690374beb
SHA1: f0862c9ba971fe9826518c525a1f83f7030acf4c
SHA256: 3d0d4ed0f73f5e0e2f20ae4229ffa1395d2d01956c0467f1304f689917e38703
SHA512: c46fb9fbb70f0466ea928d40dc76fa9017876caeb65a9668f018f5c83570f2f44cd2a9b50f404ed0490db03d7989649b28ea255a439c1d281a4d98353868c186
Description: GStreamer AVTP plugins
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains the AVTP plugins.
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: gstreamer1.0-plugins-bad-avtp-dbgsym
Priority: optional
Section: debug
Installed-Size: 119
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-avtp (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp-dbgsym_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 95996
MD5sum: 3681897583f33e34456cc7afb2f42573
SHA1: 8961d2487cb0e40ab314fb3a541d78ab6f7cc425
SHA256: c2131b442c95fbc38912a8cef0e42490bc402ceb3c42982b28976e30693092ff
SHA512: bd9350b9b4a4e67f8f41899b0c0b69a51196ef619d6669de8f97d207927bcb119a19b69166bdba80e85d5e52d3c7c214742703ad2d8728c7ff8cb37e4ea208ee
Description: debug symbols for gstreamer1.0-plugins-bad-avtp
Auto-Built-Package: debug-symbols
Build-Ids: e3c0de3ac0db34d3e58aff6b7b12b5ac619a45c9
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Multi-Arch: same
Package: gstreamer1.0-plugins-bad-dbgsym
Priority: optional
Section: debug
Installed-Size: 6230
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-dbgsym_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 5009756
MD5sum: 244522429f59311e882e7e68a8034f1b
SHA1: dbb145d0a10a82a724345cd1a30adc5ba9ff8e08
SHA256: 1d6243026a367a87321edbf28ad67fb33823c279dc5f5df9375a83feb1f91c4c
SHA512: 0a62eafc89d070cff3315a66fa9048ced46115ce6718969851f3dd2efdcbd56608bf35409c59fb39851bb0d3e615a06987de0837094620004537486eae5ba5e5
Description: debug symbols for gstreamer1.0-plugins-bad
Auto-Built-Package: debug-symbols
Build-Ids: 02f2e153c23e299d6450238b8cfed661ffcd9fec 04e87c9af552345503953ba7b681f32a5b2d3e59 06d70169339a946562d03533982a1d7fbfa838d9 0aa73c5fc3b1eee30abcbfaaf30cebf0ad5c679a 0c30305caafa00304bdee89898ef3dbacd8cfb9f 0d4cf7706cf8af4956fc8a75098c197d07192ec5 10c2bb1f01bccd69cf0206828bec2e0543e3daa9 197bcb6c37dc1c05913bed393297fafa7c4e515d 23b14ba736e2f42cd015c893a3bf4edde8071ebe 25a24957a2809904d57b180c86f6e2ed7fc71ebc 2746f3bb7db3c657a74031335d78341336d1319c 289c5eb8ccec698b5ed5507e3da213e7aaa85703 2942a7ee465173f9e2505d6f3a97c7840eefc64e 2b11e1252aa3c2fed7dab1548f8cec95051e939b 2e56ccb1916ee4058fabed563ae1dd883b301086 30f5c5c59ac1cbdf001bbf83304e86f0b9a65822 33feac084a921c474e31b17a9e8bee1a0a95508c 34f689f79d40d0b50ef2558ef784595804234fda 3791cb0a9ed5bf4713953e622790a3f0608ea3d3 3a9ef0ccc3660a10ae0e2c4a26ebf6bc1377d8d7 3d3ac4276116105ab2221d735333878b0b21ad27 448662b0be40ade518d86ac5402969bd94e4bc16 48e5e5a75434fda7c421aabf7cbfc9cf28f5d9e2 6120204821d356f9dff287ea5fafe682d29918f7 623ebc956f1affb12d79d0ac1db6ba0b497a4248 66216e881f8f1cd9959fa6eec5164e2eadf3e5a9 69e154ca3792ab4943316db57e779f986f13f8c5 6cc710557119c4e2d26c22bb58913d6905763ac1 724d46568dc574b7d8860ceadb6a832c23f8e444 74796e580dce17d580f565dc5baff70666dcffa5 774d0434ca5ed7d6238ab9b4ea7757d19c93bf5f 7754ac49efa2e2760be76cac3d286c27e2a399db 7b90959a8cde21cf147dd92b17d861af53b78743 7ce609cd111ca82349a0a8f1f33eef4003c0dd8f 7f2221876f730bb594afd4878816851e41d83053 7fe1bf81fa575c0a7b96bc05206fa4f06a5995ac 82533c9d36d185a7a7720120973d2a6d00f9e569 8320fae0a413488624fc7c82f1037b2913ba3d81 84b20adb23702f0376ce975c04ea96cf22b2470e 86feed6956fe4bc498ade4e66277e5f47db8b6b4 89aeafce0f8ccefe8ed4a05d85b2247100598e23 8e360605d9d8fa432d92c03f05b6ceb69c7a758e 8f43fa728adda70dc68f24cf131c99cd74dc5d22 8fc8105e472267c247c5744fc5b569554e331131 8fd4d94737ad9ccf01fa9a60a0d75486763c4c8e 90ad783b84112e4bf2cbd25fda19fadd478a4234 9187f401c90a8419743b20efe5fc5751a088882a 96ed268a5def1b35c53a37e73c6b913ded115f33 9706eca190c998e24f3de11818e6ebd3aec9f6e2 971ab2f3ecb2539a973c98dc0259506863d646ff 9a51df7025316fd76613845f9cbc3827ce1ccc9f a1f7fe83ce7b227e0f8604c8f96d9ec6f4c5718c a31855e99e5ff0abb88a807d21ff5d031e81f9ea a531c3316f6fb33112c9a164af4066ad1f9c170b a8f05155af1b5fff52466511a486a9ec0c387b03 adffbaf1c65398fc0d216a12113c7e80a0471746 b01bb197dbc96bb0804d5daa44f2fa9a04eb86d5 b035bcd23bc79a9983791f54baed89ed4a363704 b5a8e0f4c9aaa01e55db257ad4b376de0a04310c b6803333c491cd82b0bc402a2e3c28ed1db09f35 b6e0e904dd18581fbdc28bbf944125be2f67d252 b82c53450a0c77aac3fa61eb4609d330f3c36ddc bce3df64b7970d1a4aca43d661f010dd027c805f bfd866cc040d56c134fe9e1743a95f54767997f8 c4058087a72ce83f599af551da8f944053eca8e8 c596156e321d8b01095f54cd578f4568848796a4 c5af862498826d8b9870d289df972ce169a6d793 c65429ee9b05511c8764d07923bb703cc4c84f98 c80bb1896f117dd6ddcb5226c6374257d3ef2c67 cca85e6d3b1576e5e95ffd960c2f89f6665f062f cfac082393dd639f9def57137557c58b4badc770 d150ad0066f5a4acd405880db86711821856f214 d3541cb95ffea91645aa2d987481177033eb1405 d5fe3ac2723f0903f4f7b974a5d9156cc1ff61a7 d83cfff4aee4b6cdc2b168d768987d8034150a5f da437fb8038a949e70b10b8d6cb9defa41e23006 e5873754e63107d023f0f9054f56281326a809cd e8685756ce3dedde58a84ede0818c418eb6b8a56 e8899c96dee15ba21b7745c14b308ae53c7816cb e890bb56ee29a5d47c0ab9eccf7770d5e78995a0 e8a2dd5d1e129ac354f11815da773f37c6257b1a e9d4171a5884a4134aebd818db1fc0eb5316b909 ead52f0606848b2bd4a80ba5597854d99510388e ef556e97e098951d00abef370359ce48938c3325 f2d8c9d7626916deadbda017c8133c90122da8ec f4832659711743cc477c35cb8f1d78f06acac004 f565d104ce30b6f9cb9834046fe2960bc14358ab f6fcb34f641d3883f217ffddaea55ec5f1c9f869
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Multi-Arch: same
Package: libbluetooth-dev
Priority: optional
Section: libdevel
Installed-Size: 625
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: libsdp2-dev (<= 1.5.2)
Provides: libbluetooth3-dev
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1), libc6-dev | libc-dev
Suggests: pkg-config
Conflicts: bluez-pan, libbluetooth-dev, libsdp2-dev (<= 1.5.2)
Filename: pool/target/b/bluez/libbluetooth-dev_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 231192
MD5sum: db34847b7efe61b45166901d99afcb41
SHA1: 99231f723836174304a89fe45e9d20a78dbac639
SHA256: e0b95cd151eb47564df5fcac80c66c38b367e3e0cbf098f335b54c2eb4115362
SHA512: 245f2b67074248265e68bc941e499930c393d06d21feabaec441e0a2767fc86b3c259f0c365d9b77762eb0848537d782e493a52ec08dabca4b0bcc9c6fdbe6a0
Description: Development files for using the BlueZ Linux Bluetooth library
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
.
This package contains the development libraries and header files you need to
develop your programs using the libbluetooth library.
Homepage: http://www.bluez.org
Multi-Arch: same
Package: libbluetooth3
Priority: optional
Section: libs
Installed-Size: 253
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: libsdp2 (<= 1.5-2)
Depends: libc6 (>= 2.15), libudev1 (>= 183)
Conflicts: libsdp2 (<= 1.5-2)
Filename: pool/target/b/bluez/libbluetooth3_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 111372
MD5sum: 3d3c6f49908fd6dc10eb3738fd0100f3
SHA1: f21ee2d8074d35655544a2a651ecba61cd5f4a1e
SHA256: fe5cb14afebed7209fc87aa3126cda290ab97ff464d635eb712443e0baf07a80
SHA512: b333786b884d27f62cae3cfe964bb358b8f1661f1793db74ce3dc260552077c16a4aa8a17c1c76b59ce1f08143e68bfa8f3e58bb9a7f0468609f2409a7dced43
Description: Library to use the BlueZ Linux Bluetooth stack
BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: same
Package: libbluetooth3-dbgsym
Priority: optional
Section: debug
Installed-Size: 174
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: armhf
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/libbluetooth3-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_armhf.deb
Size: 133892
MD5sum: d84311ab0ca8bde09b3513c2648d4cf3
SHA1: 7d73f9ae98a0a981c769ed6b5a71167de886754c
SHA256: f4c3ab5d5515c891262eff5726b256afbdfa53589352e531d406de04c320dd34
SHA512: 555880f96d629ae43c1aeecd5059e6b7d9cc055eef083e8debab27d758987404747a026ecd1b7004480a49dc729b90d47a5c38ef2373ae85c8a53171793e5e3d
Description: debug symbols for libbluetooth3
Auto-Built-Package: debug-symbols
Build-Ids: 1818942a5d37dcd91b76dc616361213bde94796a d039b9a3d20335d5d9dbc9a02b8155b2b10c1030
Multi-Arch: same
Package: libcurl3-gnutls
Priority: optional
Section: libs
Installed-Size: 514
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.28), libgnutls30 (>= 3.7.0), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-gnutls_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 313856
MD5sum: 7c833acd50eb3700e1bc30dbfc704c66
SHA1: 632ef5fda7f82fc283adf03c4ea2533e10df1d2d
SHA256: 6366b31a029723fb45c5c545bcbbf7ebdf86bc89161b75f339c0504f845ebbd3
SHA512: a89d27cac533b7d617e219111f523b5f65d1e6a8b5f02d2828db1d1ef61946c017900efe5b28eae36b08ef3b6d0018c602e024035e3d3b65ea7bc4bcbb7d1ccd
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl3-gnutls-dbgsym
Priority: optional
Section: debug
Installed-Size: 873
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/libcurl3-gnutls-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 803976
MD5sum: 23ecd3a7e6bc5fdb6bf20ad020055b1e
SHA1: f135f2b2c5551083692d0f5e0cea75aa8740b1d7
SHA256: 1613a70c9b47cfd61b0e34749a1a75be067518b288fcd6bd852a9d17f60d4f6a
SHA512: 4f9a6279a4b3f0d66da3a1ec7ab4acd151044ca26e5bdfbca32453bd4dabf8f724df1f355d785b7937874fdae33ed1c8edc0a447306b55ee380b3d9bab0d8b08
Description: debug symbols for libcurl3-gnutls
Auto-Built-Package: debug-symbols
Build-Ids: e11384ea8dde5560c5caf863080763f13b68442e
Multi-Arch: same
Package: libcurl3-nss
Priority: optional
Section: libs
Installed-Size: 522
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.28), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.44.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-nss_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 320068
MD5sum: 0da7c77ce5af2d5dc6a7ad1c39320773
SHA1: 89a70e4600fb56cd412801e839cbdab9b389a925
SHA256: 8909b1eb80ac9108e417300fa1a0318891aa7059bbb43a41f9374fe796fc2950
SHA512: a1d706a1f9890649d12596a6d0eab35f83591cb87ff6798b0a5b49fb1a83243b9b0ff7af22144c726860b3926c9fcd3ad1835f0a10676d54d121257e3f3b859b
Description: easy-to-use client-side URL transfer library (NSS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl3-nss-dbgsym
Priority: optional
Section: debug
Installed-Size: 914
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/libcurl3-nss-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 846840
MD5sum: 632fd979d3e24d0d2df9c8d01a4fe41b
SHA1: 93bff05ea98b7d2bc284544ce7828dada304659e
SHA256: ded5be860c5bfd07c89d770d8f13d445b012ac199be9114b026eda5c30ef0b5b
SHA512: f5fd15f29caaaed508662b17d22abc17dc98131275a8fff7bcaa0e6d08490944222bcfc47a3cb01e625a03acb72cd39ae5b513608fc238d99a7663207179f9db
Description: debug symbols for libcurl3-nss
Auto-Built-Package: debug-symbols
Build-Ids: 07902c7b75a2a15662ee2b5cbb078fc19fadeb0e
Multi-Arch: same
Package: libcurl4
Priority: optional
Section: libs
Installed-Size: 517
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.28), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Filename: pool/target/c/curl/libcurl4_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 316740
MD5sum: fc155595cf14bb45269aae3ea1f73792
SHA1: eaf869fb84f770544c5f2e5a0105cd4bb17de2b8
SHA256: 7f498d296fd69a9b0767af1b4b81b2569da562fe4ae5863019b95575c63d6e53
SHA512: ab0ac21fe2d56bd0a84153b2f0a22ffd92c3390c5724e0230fa078398ae675ee2f035343f563ad7a430db7d9c225d50e8a3b15c512f27c0ba2f46c27590520db
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl4-dbgsym
Priority: optional
Section: debug
Installed-Size: 895
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/libcurl4-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 823968
MD5sum: 75efd3a72f1bc8d92e713a35398b0b2c
SHA1: b2bdb7d61c33974bba90d4e0e620042231b240d8
SHA256: 4ef836aae2a70c3662be14e8f340530a1f6d1edb548cd6aea224c9d97fc02f93
SHA512: e83028bd692707a90b2a3cc8f7c650c6f2e4b0927fc1f537ac77b612b86867f13e9e52b7d17d4bfa890f5946c61a524a000063b716ba29fe6e7a27fb7b4be370
Description: debug symbols for libcurl4
Auto-Built-Package: debug-symbols
Build-Ids: 18d9de1d259a0fb12a1083bf4ae91fdc1713d3c9
Multi-Arch: same
Package: libcurl4-doc
Priority: optional
Section: doc
Installed-Size: 1944
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: all
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Replaces: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Breaks: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Filename: pool/target/c/curl/libcurl4-doc_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_all.deb
Size: 1014956
MD5sum: 54c5f1761f1a7871fe36da36dfd36878
SHA1: a9c8e8204a2f2630fdde83c688bc5b0c51fb0b64
SHA256: 1a8a8643b43802d1429dfba612222dcc1e5d4659ed07c818ef825ab9e5b6ea3b
SHA512: da21423f51c0cef7568714702ef0dc0f90e92612d5e6c99331fce52ba21fb2b53747316c92735ebb68b9b50e98ea7c3bc70571154f4f9f6840037860045d729d
Description: documentation for libcurl
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the documentation files for libcurl.
Homepage: http://curl.haxx.se
Package: libcurl4-gnutls-dev
Priority: optional
Section: libdevel
Installed-Size: 1104
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-gnutls-dev_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 409192
MD5sum: af20fceda8b872ddd1bc8a6c7588586d
SHA1: 9c48fdcbaa1b0590b76447d915863eaa4336a13d
SHA256: 4cbd294ec7287f978b4256fa89fa23511e5271be7e369b863ec2391d13795220
SHA512: 0761991f6086d89aef84ae12cd33cf5087527cccd9bf1b8f5b2df357962d0a6a95b937841d3ecdf4fbda134818df33fbb4f5a31cafe8969beb81fbc7a2654bbc
Description: development files and documentation for libcurl (GnuTLS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl4-nss-dev
Priority: optional
Section: libdevel
Installed-Size: 1115
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-nss-dev, libcurl4-dev
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, libnss3-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-nss-dev_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 416880
MD5sum: 44479849caad3207ab8f047b25c09446
SHA1: 0297434794f59d538aaea518a4c5737f91d9dc57
SHA256: 0d1c0a37e26c609afc71a860bb392a178b285478e75b89d6f8e5d2f53d3e68f3
SHA512: 759fffc36a75f63b929f8f71b2311ed48d2b427bec8ccee77ee02b36bcc26310fa6c72e9b6d49138e2be057c957ac6777c353e28a0e561c64b0f5da34fe6360f
Description: development files and documentation for libcurl (NSS flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libcurl4-openssl-dev
Priority: optional
Section: libdevel
Installed-Size: 1112
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: armhf
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-dev, libcurl3-openssl-dev, libcurl4-dev
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, libssl-dev (>= 1.1), pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-nss-dev, libssl-dev (<< 1.1), libssl1.0-dev
Filename: pool/target/c/curl/libcurl4-openssl-dev_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 412360
MD5sum: 2986cbe04a58f2752dd4799cf0ce0aba
SHA1: 37b917f8461661bb7f0cb7d722bc4c0203d43b48
SHA256: 2a38b5f049b18fb6c35fab92a0b82c65121a28e040e7ddf5d1d5def9bfb03f1f
SHA512: 8a98c2703d9d44718754f8f03f731a30cd189ca13025a34d43935d03efb729434945ee61bf2c223dd5926befe5d7d0b26680e12f6349189142a6f4c07a2e8647
Description: development files and documentation for libcurl (OpenSSL flavour)
libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
.
libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
form based upload, proxies, cookies, user+password authentication (Basic,
Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
and more!
.
libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
fast, thoroughly documented and is already used by many known, big and
successful companies and numerous applications.
.
This package provides the development files (ie. includes, static library,
manual pages) that allow one to build software which uses libcurl.
.
SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same
Package: libgstreamer-plugins-bad1.0-0
Priority: optional
Section: libs
Installed-Size: 2909
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 2283260
MD5sum: d3d7565b5f90ef363eb12a7965e7bba4
SHA1: a50b41013f46f98d09969de1cbeab3584cf505e3
SHA256: 83f11de9df188418825c6b3ec8eb316741c2f23e39643ef34de4efc66221711a
SHA512: 1604034ff17fee10478d15afe03fd860d6e16871fc9909de59ec7e7fbc460aa5f93d71131d3f87304ab89eb622c214ab7eb082597b2d5b41f68ebca91385c98b
Description: GStreamer libraries from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains shared GStreamer libraries from the "bad" set. The API
is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: libgstreamer-plugins-bad1.0-0-dbgsym
Priority: optional
Section: debug
Installed-Size: 1379
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0-dbgsym_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 1165296
MD5sum: dc2f8e464ed50a2dfccee3d40f62716e
SHA1: 4f67b6f3ef6ef7ef49135fd3db610a8b4957dc21
SHA256: cbc4d34bf9e153bc56d1d91dcda2163fb1c4cdd5e846c00d2b3d056c8b9029a3
SHA512: a76bf32fe07fe9fa4d844de7e3b1c157366289ac6c5add9b78deea2f3d63b1f7c69dc0839e9497387b47b6580f05ef19cd97bb6d0150c67336597fba74d57737
Description: debug symbols for libgstreamer-plugins-bad1.0-0
Auto-Built-Package: debug-symbols
Build-Ids: 02c5a56d57d61da52a5ed04327ed3dede84e6f0e 064859e6bfa69c4bb9cbfc0e0ccfdd16935187a0 15237c1d61729958cae6a00188ebe10b8fd2359b 27bb266bc3d480b74324e3871998f9815cb77ca2 44977cc6d1d5abb83ed59e7e959e001be234995a 462ed87c75d5697d794f73e9072178ad4e19b635 4fe18aba19d894433c4c0de625e6167e98a46377 5e29b97eb2f73e09ff40bf9dd096e96ac0298ef0 758dd3fb9d6cfdbf3e57f639a471e1c351a02ce6 83c91749332f2f36f9729f2baeef47bdfdb22db7 939fe54faafdde84c8cc46d3503f86d5a809d3a6 a9454d486fe060822cdd506bbfb2b6fee187791a dce851c9194d6c87650f6b35f3854c795056bb28 e1b803c468eccb4d16a6f10f7303aa797ad0407c e21c7231ebee45f3e1c689136271f9b1932c3e4a
Multi-Arch: same
Package: libgstreamer-plugins-bad1.0-dev
Priority: optional
Section: libdevel
Installed-Size: 3500
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: armhf
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u4+apertis1bv2022.3cb1
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1), libgstreamer1.0-dev, libgstreamer-plugins-base1.0-dev, gir1.2-gst-plugins-bad-1.0 (= 1.18.4-3+deb11u4+apertis1bv2022.3cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-dev_1.18.4-3+deb11u4+apertis1bv2022.3cb1_armhf.deb
Size: 2075404
MD5sum: 40224df4aa5adc7fa5eeb1295794da7f
SHA1: 1bfc41668deff69f91d2925e46614eb30900afd9
SHA256: 5cf80ba025df7f434eb10640d4455452264a143a0cfdb37a64597b6f18a9b32f
SHA512: e1cdf9b0293bb51604533dfd3e0519bb7a04c36476ab940e36baedb88afbdb32304e421d8f88c293cbbe64ffda97ecf6e1cc8a4d8428e243168fd787cba3bcea
Description: GStreamer development files for libraries from the "bad" set
GStreamer is a streaming media framework, based on graphs of filters
which operate on media data. Applications using this library can do
anything from real-time sound processing to playing videos, and just
about anything else media-related. Its plugin-based architecture means
that new data types or processing capabilities can be added simply by
installing new plug-ins.
.
GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
to the rest. They might be close to being good quality, but they're missing
something - be it a good code review, some documentation, a set of tests, a
real live maintainer, or some actual wide use.
.
This package contains development files for GStreamer libraries from the
"bad" set. The API is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same
Package: libjavascriptcoregtk-4.0-18
Priority: optional
Section: libs
Installed-Size: 15629
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libc6 (>= 2.30), libgcc-s1 (>= 3.5), libglib2.0-0 (>= 2.47.1), libicu67 (>= 67.1-1~), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 5643948
MD5sum: c172f5f4e13e3d66c32c7347c475008a
SHA1: 0f438da2650b9f7c1056f36fbbcbe4cfc451a5fa
SHA256: 6807ad72d6e6075813f617b66f77c7cbedaa1a67bc0331c11ffac8288c8fa5ba
SHA512: 32a862ba56b9b1474a1b44c11aae9ea4c2640782042ad8e3290dc9fe95b2a360f002af9650328dd05f7d0f71dfc5e03f09d9b771db55ed016e093a4e8a8f9943
Description: JavaScript engine library from WebKitGTK
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libjavascriptcoregtk-4.0-18-dbgsym
Priority: optional
Section: debug
Installed-Size: 33073
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 28831608
MD5sum: 94b8b0ddf603bcbf6e9ea349fd29ec48
SHA1: ac540974fc7e85a6d41c21dd8e5a083292dd603c
SHA256: d1481c4f0ac0514cf7403aec37f64b8c8de4e00953a81e053fce19e24005fa08
SHA512: 080b2653c1c171c0ab80891f620c51a0e6761549bb7e813299e0807c70cca7178363b8eb12639a9e18a6c2d4e12261790704b4804806ed103f4a66d988e87460
Description: debug symbols for libjavascriptcoregtk-4.0-18
Auto-Built-Package: debug-symbols
Build-Ids: 8bcb55b7eb6e0655b6fd6c2a2e5659f5d2704200
Multi-Arch: same
Package: libjavascriptcoregtk-4.0-bin
Priority: optional
Section: interpreters
Installed-Size: 652
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libc6 (>= 2.7), libgcc-s1 (>= 3.5), libjavascriptcoregtk-4.0-18, libstdc++6 (>= 4.4.0)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 296892
MD5sum: d0b5a367451f475367f15e3b648144da
SHA1: b3caf35a8e118947616b5be77f6ba92160d8e7ab
SHA256: 7abc88db636714343b3b9c660fcd8d3967c330f3196b55e514d471c1eafc03ab
SHA512: 6ec2cd461853f0d8c3499565cb7a3cb1c6c2ef65a721bc5ec52d4141b2d07b0906f47b99b9edbe66c4c757b545f81fe76251deac2d8c3852934a33c419b3422f
Description: JavaScript engine library from WebKitGTK - command-line interpreter
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package provides jsc, a command-line JavaScript interpreter.
Homepage: https://webkitgtk.org/
Package: libjavascriptcoregtk-4.0-bin-dbgsym
Priority: optional
Section: debug
Installed-Size: 518
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-bin (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 449428
MD5sum: b82ac73921e2054c222188114a29390e
SHA1: 970ff387713acc3692d685ad298176fe285a4c6b
SHA256: 7712b4eddc5ba82fbad1c26b80d0cffa71624507edf60384b98359cbc5b3fb18
SHA512: 87abc52228daff84b2406a6f796f7f186d6a7add79e3a9355da8f27cb939184783b3de2f908d10ce92a65d2c75bbe58fcc3df032fbec0387d2b2b69cd0895702
Description: debug symbols for libjavascriptcoregtk-4.0-bin
Auto-Built-Package: debug-symbols
Build-Ids: 3fb84488d7d4905388a992cc5dbba9b49a6aa9c3
Package: libjavascriptcoregtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 885
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libglib2.0-dev
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 244152
MD5sum: b1ba09ca3d7484d05c2d7b98237507ab
SHA1: 8e5b9f88620630f7bd69470b24caae302f6b0072
SHA256: 08cb5f9b94b7b82acc5b92d5c97a1af9c175c43f49cdf20bfad10f23b27aa13c
SHA512: 965ca311a3a9a6699eb79de4cc93a3a922feec415fd98a8eeffe2bc118057ffb48c2bb8615d87348e62b96b32cef1ce3414980adab50a17a800bef5e7c50017f
Description: JavaScript engine library from WebKitGTK - development files
JavaScriptCore is the JavaScript engine used in WebKit. It consists
of the following building blocks: lexer, parser, start-up interpreter
(LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
high-throughput optimizing JIT (FTL).
.
This build comes from the GTK port of WebKit (API version 4.0).
.
This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libnghttp2-14
Priority: optional
Section: libs
Installed-Size: 162
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/n/nghttp2/libnghttp2-14_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 69136
MD5sum: 9e545424064c0b54133033632806d7d4
SHA1: 5b2c55808fecc6278de1f67efb0a8a45145ab9f3
SHA256: d752364caf4a66b773ba2f1bf47ac739517f5857f88b21756f513a1266e508af
SHA512: b28960c618e23e1a0e3b4a107f5ba7672bdf6f24397d72f2684ac293ed074df88ae17eeda1a17db7b7bbad1bc17686ddf0dde1bd451c9997eea90809e88ad45e
Description: library implementing HTTP/2 protocol (shared library)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs a shared library.
Homepage: https://nghttp2.org/
Multi-Arch: same
Package: libnghttp2-14-dbgsym
Priority: optional
Section: debug
Installed-Size: 240
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/libnghttp2-14-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 210256
MD5sum: 5bf49eb21365607a58aa283108d9ee25
SHA1: 1640cd8512b0e089599aa58f0b553bdf82179e5a
SHA256: e033e8a39c26699020745fb59c24ce54c0f3c0a90b0f9d6d2963bc2b77fb9fbc
SHA512: 127f2026653b8a5b8c5fc0f25b61d9079e2b73b1cb5e0986873da3f9664ca88b135d3dff35780218dd7322125f3ee01bb1b2273c1525119d22222760aebf24a2
Description: debug symbols for libnghttp2-14
Auto-Built-Package: debug-symbols
Build-Ids: fe0d6142bc053aff077df3a27e1511d8dcc65cfb
Multi-Arch: same
Package: libnghttp2-dev
Priority: optional
Section: libdevel
Installed-Size: 426
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), pkg-config
Suggests: libnghttp2-doc
Conflicts: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Filename: pool/target/n/nghttp2/libnghttp2-dev_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 106040
MD5sum: 17214efc23d75e9cdd9033bf3458ae2f
SHA1: 2d8b21038775f57b7bb8633c5f307717e7277449
SHA256: 6ce134b93793387a9a27822b22a15777bf0d2569937e8f2fb734a4981e905456
SHA512: d41b4e15ff4baf94fcf3e11a8eb0e3e67359ab73f2c15436a5ad99ec482a73c36c1b2cdab9417c6c517f9001025881a10d15371c046fb1f53f029db041b0b752
Description: library implementing HTTP/2 protocol (development files)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs development files.
Homepage: https://nghttp2.org/
Package: libnghttp2-doc
Priority: optional
Section: doc
Installed-Size: 10333
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: libjs-jquery, libjs-underscore, lynx | www-browser
Filename: pool/target/n/nghttp2/libnghttp2-doc_1.43.0-1+deb11u1+apertis0bv2022.3cb1_all.deb
Size: 2956932
MD5sum: 0379cc51ef413390020c68787b349eb1
SHA1: d4837561a87cd60e95736cfdd3747d546e5dfcd3
SHA256: 8c16b0b0cc44ffdccf720e004c4d8c46961f19115b930c19a1dc976ad736fa53
SHA512: 42c33b088f113add279763ffb9eed9a88f1e551e0a0968af379aa7d843f1996aff871bde653a3ded3abe6b314d017ab988380660e8bf94a477e97c722e01d98e
Description: library implementing HTTP/2 protocol (documentation)
This is an implementation of the Hypertext Transfer Protocol version
2 in C. The framing layer of HTTP/2 is implemented as a reusable C
library.
.
This package installs documentation.
Homepage: https://nghttp2.org/
Package: libtiff-dev
Priority: optional
Section: libdevel
Installed-Size: 887
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1), libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1), zlib1g-dev, libdeflate-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Filename: pool/target/t/tiff/libtiff-dev_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 400564
MD5sum: b2ff0297ac1f9badd4f8ca3d1472665a
SHA1: 5eb7bb8293800671ee05c5719b1752aaf3b243d8
SHA256: e35302cc3e2c5c9b0c8ab92bb24ab92e381601f7de342ca59991852a49bdd5a4
SHA512: 511801f9dcbd25fdb8f713fe4d2c5293c548bc999905323153322ac3ce8da918aa194529cadfa1c22556d40398962dc582b248e204505a12d3e720bde7673056
Description: Tag Image File Format library (TIFF), development files
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same
Package: libtiff-doc
Priority: optional
Section: doc
Installed-Size: 1324
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: all
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Filename: pool/target/t/tiff/libtiff-doc_4.2.0-1+deb11u5+apertis0bv2022.3cb1_all.deb
Size: 439276
MD5sum: 8ed83e6833f32041f0ff5b462ba0b46d
SHA1: 2faa4b19c1fd32ba7a084d3530cbce5d0b13ebaa
SHA256: a5ce464eff0af7b8e33eb28bbfc3646124ef13c6a50eb910db635fbecfb584a5
SHA512: 9ff7319be68a589c8ea79c5097dc18fe61b9be376d357971b58e04faa5f5579e7d582b39e9db89d78367e6edfe0a642c9db69bee2f2c1a813a848b8537bd1de6
Description: TIFF manipulation and conversion documentation
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
contains documentation.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign
Package: libtiff-opengl
Priority: optional
Section: graphics
Installed-Size: 152
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: freeglut3 (>= 2.8.1), libc6 (>= 2.4), libgl1, libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiff-opengl_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 135156
MD5sum: 45128e5433804383289bafb6c7d30d61
SHA1: cfc483de5569b31d458d1abec791529131d9c6bf
SHA256: 75ad21a9a4288ebf3d2a9d58036fc567b1e5d077a7bea6866a42dada35e0d912
SHA512: 5af95bdfac2f8daf2ffe0c90175da3ec6cf9bca523f1475906ee940bcb363f38ea03de19d46a21ae9008a05363591c2c164b10905e1e9a535b87e138574bb35b
Description: TIFF manipulation and conversion tools
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
contains libtiff tools that depend upon opengl. It complements the
libtiff-tools package, which contains the libtiff tools that don't
depend upon opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign
Package: libtiff-opengl-dbgsym
Priority: optional
Section: debug
Installed-Size: 30
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff-opengl (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiff-opengl-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 14992
MD5sum: 32593b1dc224fe9f218730cb15ccfc56
SHA1: 5dcd912a449c6b328bb7a22062fe95ee236ac43b
SHA256: 23181827974fd2c1b2b938f87cf05d7993f22bff6e30d369623387506afa53a6
SHA512: c571c6c619ff28a28238a552bf48fbfc11ab8b7a33b12f1fcd4216b635871d96c2b82d8e07a28525ba5230f072f43af3224c15698bd0b505091a49c10325f374
Description: debug symbols for libtiff-opengl
Auto-Built-Package: debug-symbols
Build-Ids: fdc45e5ab8330d464c7892c12eda0b5cfe23ac6d
Package: libtiff-tools
Priority: optional
Section: graphics
Installed-Size: 584
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libc6 (>= 2.7), libtiff5 (>= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Suggests: libtiff-opengl
Filename: pool/target/t/tiff/libtiff-tools_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 310444
MD5sum: 85fdd82c71398ba6111c0645eca5ef3e
SHA1: 813ec86ea22130aa776aaf2758a4d8cf6cc3f8a2
SHA256: 4793f70ccca0187749867f932f578066cf55c256bf20eb326c27fd04add485fe
SHA512: a2d50c0e14fdb21ac2bcd6d97c95e0211c5b00acabd30e18b82c38bfe365ffe064c8b7a50eafadd1fa40fa15fcf7ff5c849a3ddbed1d43067f3e0ab6cb241ec5
Description: TIFF manipulation and conversion tools
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes tools for converting TIFF images to and from other formats
and tools for doing simple manipulations of TIFF images. See also
libtiff-opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign
Package: libtiff-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 574
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff-tools (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiff-tools-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 420468
MD5sum: 654097f9dcab913fac9d76c9f505adf1
SHA1: 7b42295af68eac5ffe7d54c72e51c5662f60101d
SHA256: 4f7dd9eab70f1997e65242b6c9a232d4ce8f28c235a3e173592dde13cc122ea3
SHA512: 9f43497ded4c053cdde5dcfe4578c9bfa98226e42ac2d5699bc2762df78d140f167f552dc2469e2576506aa79285de98ba7e2490476637c7ce0a03dd682dde34
Description: debug symbols for libtiff-tools
Auto-Built-Package: debug-symbols
Build-Ids: 10c2ed8c97e69657efef0b4cc2e95e08640932db 25f10ede8fb05e4da888b85652e3c89b62912867 368fdcc195656772d0ab9f172eac7a8ec12b01a4 429911719df7c75ebd2067e02378da0d1bc999b6 56f02380d2b4ded646c6591b21dc82d8f03b193f 7180e11642231433f59abba542128686c063e1f5 860248b55365a58af9aba637f02df912329f790e 89180cede16e672fd061dec53e08723cfa6ca48e 94e89087e1e084bfcf8d9b96a5051833be0df76e 981f8418a1fe1227febbc02a08dc76ce209bd2a0 b76a12ffc092e92b6f4ad146829e644aab8960f8 c1d5e116b93aa975d58c2a1c2aebdd07ad5119a3 d01271f494743258cd7bfa0fd7c320d4ebcfab91 d4762bcf63c8f011a8ec94e01fa784ca06d9d9bd d804027014f828e06a52af9fd069d9107145b99e dcaa21ce0fb5fe0ff1c9c4345b4179fd62adc368 f208abae76e959673833fe264a09bf36f212e1c0 f8ef0428544c5e5cef1afa06693f6b2e1b3b43a1
Package: libtiff5
Priority: optional
Section: libs
Installed-Size: 541
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libc6 (>= 2.29), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), libwebp6 (>= 0.5.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/t/tiff/libtiff5_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 274572
MD5sum: f17cef7987eb0f33cd2fe108c33b6f6d
SHA1: 1025d7f9ebc58e6ecf460dad42f8fc6ebb281fc8
SHA256: 1ad4501cd3061cf3bd8fc17a597d324537475b958d518cd433b450c030c80c80
SHA512: 11a996d45fa30ab2c0d8b0b6ab6ef8a287134e570840f9393d39d92114869548cd49864ef9bc5ebb1ee259d18d19c209c4fee7f23ec1fadb48af3df3140afda7
Description: Tag Image File Format (TIFF) library
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same
Package: libtiff5-dbgsym
Priority: optional
Section: debug
Installed-Size: 477
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiff5-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 432024
MD5sum: ffe26fde4c8751359b1c71bb35465598
SHA1: 14a2911dcc4185f0b5a27bd88106e6d56f731ff6
SHA256: bcf9c3ee5f87b4b83a42caff7c4f50c744f618f6563ed537e8b75b2951685289
SHA512: 1d23010a0884413a69510ced906588c6186249f2065f5fa233e7d28997f3d1953f8d21e65cffa571b60432c01e9b7781de819341b5aba8f4635ce8a827905bd0
Description: debug symbols for libtiff5
Auto-Built-Package: debug-symbols
Build-Ids: 326fff65a8de745f8b9ce6d6991018ae672a6a8f
Multi-Arch: same
Package: libtiff5-dev
Priority: optional
Section: oldlibs
Installed-Size: 131
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff-dev (>= 4.0.10-1)
Recommends: pkg-config
Filename: pool/target/t/tiff/libtiff5-dev_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 127504
MD5sum: 2d1fd4cca79903428a65e7aefcb8c025
SHA1: 99382ed0761593f2cf4ea9ed4879748dc29fa322
SHA256: 069e64f4ba5f1d66f1126af709e78cd642d8cf61004c1a0a8538ed101a712891
SHA512: 983b19ebd137f5707d61186bf588e5c8eabab2493a37f9a871872b0680b4d6d499e5cdf9a6acbbba75efc7b5ddfeacd10974fea1216179a09e2b2bb9e0cfd1c7
Description: Tag Image File Format library (TIFF), development files (transitional package)
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the development files, static library, and header files.
.
This is a transitional package. It can safely be removed.
Homepage: https://libtiff.gitlab.io/libtiff/
Package: libtiffxx5
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.5), libstdc++6 (>= 5), libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiffxx5_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 130980
MD5sum: 6d6b8339c01f08a27e94b7218c4080ce
SHA1: 03f3f2b6a8feca4a5b12f3211ebcdde92ef5d4af
SHA256: 52cfa8f039129b74f5db7e3b7dc507c2b1f20583dd800ec3f95c87966b5eaac9
SHA512: cd5011c19a09d97e781528ff0e7d21f20c1cb26611adfadb0002e514912576438b01d7bac972bad2215e2af492ffb2b296e2edf4efd6cd28d85f1553f18961d1
Description: Tag Image File Format (TIFF) library -- C++ interface
libtiff is a library providing support for the Tag Image File Format
(TIFF), a widely used format for storing image data. This package
includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same
Package: libtiffxx5-dbgsym
Priority: optional
Section: debug
Installed-Size: 35
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiffxx5-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_armhf.deb
Size: 22236
MD5sum: 50b646bb65692a7eae3c8ab56b31e0cb
SHA1: 6341d7530095627c9dae01c706dd0715750e4ebf
SHA256: 3e4a739dd041155466e6c65d48d4e0b2c86986ee53274d2802318604582a06be
SHA512: 8f0738e30ad2fc033ed34e99f3a35a2fffb46af86ae534d08d659468783c8d8c58ea60dbf1a549ebf701b114e3101e2841e7e4f8b8a39411792adc48b3b3cc83
Description: debug symbols for libtiffxx5
Auto-Built-Package: debug-symbols
Build-Ids: b27f7b80c0edc89029fa1168a72dbe932485bf7e
Multi-Arch: same
Package: libwebkit2gtk-4.0-37
Priority: optional
Section: libs
Installed-Size: 48725
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, libgles2, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.30), libcairo2 (>= 1.15.12), libepoxy0 (>= 1.3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.8.0), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.61.2), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.16.0), libgstreamer1.0-0 (>= 1.18.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.9), libharfbuzz0b (>= 1.4.2), libhyphen0 (>= 2.7.1), libicu67 (>= 67.1-1~), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libopenjp2-7 (>= 2.2.0), libpango-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.69.90), libsqlite3-0 (>= 3.7.15), libstdc++6 (>= 9), libsystemd0, libtasn1-6 (>= 4.14), libwayland-client0 (>= 1.9.91), libwayland-server0 (>= 1.3.92), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwoff1 (>= 1.0.0), libwpe-1.0-1 (>= 1.3.0), libwpebackend-fdo-1.0-1 (>= 1.8.0), libx11-6, libxcomposite1 (>= 1:0.4.5), libxdamage1 (>= 1:1.1), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.2.2)
Recommends: gstreamer1.0-gl, libgl1-mesa-dri, xdg-desktop-portal-gtk, gstreamer1.0-libav, gstreamer1.0-plugins-bad
Suggests: gstreamer1.0-alsa
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 18188176
MD5sum: 393a14434a10e6b5dbb603ee2c00d24e
SHA1: 7b28975e0360941a5ba11dda8408617ec4ecc025
SHA256: 297612cbd5d943ad17bc1a8c4b5f6e558e64677d5856d53452e7cf6e6b5dfb44
SHA512: c180de9778f894ef2d8a6bc1224a9aaf71a668eb94b25da331b03052375ae221e7a822c2daec2cb99f0cf4cfe432863076c8f7e0c4ce70ce231cdad0d8e4431d
Description: Web content engine library for GTK
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
This build provides version 4.0 of the API and uses libsoup v2 for
the networking stack and the GTK 3 widget toolkit.
.
This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libwebkit2gtk-4.0-37-dbgsym
Priority: optional
Section: debug
Installed-Size: 142610
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 114979532
MD5sum: d9291dae55471978335ef92f8e1197c8
SHA1: ee48a6ff7a911422f0e63f6c9abf4a97743ed13d
SHA256: 0b106f965dcac65aec027becd3924e9863cb0ffa5cb5db8511a9ed58d21b0019
SHA512: bde78e213bb2ab370602ac89ebead2dbab13ac2e16755b0ecae3be9521c6d70c05377b254adb626c2f9a01cb4a2434ca1372e3c9c3ded28da2d42eb111049ce4
Description: debug symbols for libwebkit2gtk-4.0-37
Auto-Built-Package: debug-symbols
Build-Ids: 2cf095a305092ea0e5400e9bfe20dc895843e0f1 33ebbbb438f1cb31b33fe4e9fbea7e2277fdf3dc 54bd2fce56a34aa0bcc9c5e6a54d9c215dadbe9e 5530bfe1ef0aecab6bccb0f4cba469749dd06f16 cedf076366228f858b264d90b41c8ec38424514c
Multi-Arch: same
Package: libwebkit2gtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 5588
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gir1.2-webkit2-4.0 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libgtk-3-dev, libsoup2.4-dev, libjavascriptcoregtk-4.0-dev (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 461552
MD5sum: 425f718c5edc969c3b72dea2fe6e320f
SHA1: a768cb4ec52145de6c1641704a6f14da06e8a8eb
SHA256: 584d9bfdf63bc23d27e122774bea24e62bf808893ed79e8b27bdf43093f0ddee
SHA512: e8d02a5627f3374dcd11447209424b370370058b9303ac3c8ca21aef71042eb5e690b4f297aaa4762a69e55e1b52fc05212618c318fa92e102096ac3f444de94
Description: Web content engine library for GTK - development files
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
This build provides version 4.0 of the API and uses libsoup v2 for
the networking stack and the GTK 3 widget toolkit.
.
This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same
Package: libwebkit2gtk-4.0-doc
Priority: optional
Section: doc
Installed-Size: 35746
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: all
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Suggests: devhelp
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-doc_2.42.4-1~deb11u1+apertis1bv2022.3cb1_all.deb
Size: 1069816
MD5sum: db6d2c6e5e7239efb92fa60db1a8914b
SHA1: e6f2f71dd1134ac81862ce49a2f37c0833097c55
SHA256: 423c269eb6792ff2e45d82f645e006ecc8eb423a85b812ccba4e97890b9040d1
SHA512: d6e2ae7353eba68e3614d575eba9d918d876e19ce2e17f97206d676118fbbd4ffa1e0d47ec96b3e179c332232c783c140dd54461aef406cb159bda8ede477f9a
Description: Web content engine library for GTK - documentation
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
.
This package contains the documentation and is valid for versions 4.0,
4.1 and 6.0 of the API.
Homepage: https://webkitgtk.org/
Multi-Arch: foreign
Package: nghttp2
Priority: optional
Section: httpd
Installed-Size: 34
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-client (>= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), nghttp2-proxy (>= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), nghttp2-server (>= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2_1.43.0-1+deb11u1+apertis0bv2022.3cb1_all.deb
Size: 17284
MD5sum: 91180e1705656122546017bebde4ecfe
SHA1: ffb5eaf756a0ee2fecef147cf8b7d13963a3a400
SHA256: 13ed163f2446ec4858405ccdc00980b04d2752ff57d42366b412eca7a79ea841
SHA512: 763768f64f0e74fee6d380d4475f5020937474937b7d08e338efbf01df38830daad2ae3b147c81a35e88c05b5cd78aaad6afa38f346cad5962ee9c327b5aabf9
Description: server, proxy and client implementing HTTP/2
This package will install a set of programs implementing the HTTP/2
protocol: a standalone server (nghttp2-server), a reverse proxy
(nghttp2-proxy) and a client (nghttp2-client). It provides no files
on its own and is not necessary for these programs to work.
Homepage: https://nghttp2.org/
Package: nghttp2-client
Priority: optional
Section: httpd
Installed-Size: 387
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), lsb-base, libc6 (>= 2.28), libev4 (>= 1:4.04), libgcc-s1 (>= 3.5), libjansson4 (>= 2.0.1), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 7), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-client_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 152352
MD5sum: da0eb2e8fbf4c6bfe48c18b3b3dfe17f
SHA1: 396670ac04616792ec245cb5b34fb3e25174a6de
SHA256: 4c9fcbaff1bd43616e7b2e5886f7a2b8ac2fe5a0f3134e23955727fd5cce3ef7
SHA512: 4a819a427ef6f5b2c8600979d0c5ff6ce5cc350afe1543c43262f38c3a4d3b9ae1c9735fe750b547cae91777e35569b82fc477fc1ebe461eb53e282110772ee2
Description: client implementing HTTP/2 protocol
This is a command line client implementing the HTTP/2 protocol. It
gives access to many low-level and advanced aspects of the protocol
and therefore is useful for debugging.
Homepage: https://nghttp2.org/
Multi-Arch: foreign
Package: nghttp2-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 1940
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-client (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2-client-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 1843788
MD5sum: 93cc09bd8dd21def94509ef54df84d8e
SHA1: 71e6795dd71a8b982a0ef8d5e70d1d25671c39e1
SHA256: 054dfdf746c2d27db9920b734a79163c7713c02dd8fde7615a81050290c49401
SHA512: 82d4b4b3a4a4f546aac3aab95927d3fc9c139263d0ee8c45f8d8ea4b224b833bda4ee33286b66348590b11e180c7acd8897c64db339e348aa7d9732840ac77c2
Description: debug symbols for nghttp2-client
Auto-Built-Package: debug-symbols
Build-Ids: 52578cda15e93737b134f2b213c96bd0e4cdb8a0 cf46b660e3d1f64f4f46b83c3ed2d37f7bbd2542
Package: nghttp2-proxy
Priority: optional
Section: httpd
Installed-Size: 747
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), lsb-base, openssl, python3, libc-ares2 (>= 1.7.0), libc6 (>= 2.28), libev4 (>= 1:4.04), libgcc-s1 (>= 3.5), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.1), libstdc++6 (>= 7), libsystemd0, zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-proxy_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 345508
MD5sum: 5c7ab5a788090fad95a07a8548cf76a5
SHA1: aeaf9d0b617949ae3565a58d2eac1ae05f68ac51
SHA256: 03e5bda3aee0eb948d11f30bb3240822e150175f92bcc5f485c853a06bf788da
SHA512: 871d9cc21b301ae0b4c3a142290b1e25469e30753eacb1f30789b159787af20d1c8248e693ce0bcbb4490d7754aee77fa558aa243b99d8d7096f0b2b0f5e8bdf
Description: reverse proxy implementing HTTP/2 protocol
This is a standalone server implementing the HTTP/2 protocol with
HTTP/1.1 fallback for clients that do not support it. It can be used
as a frontend in front of web servers that do not support HTTP/2.
Homepage: https://nghttp2.org/
Multi-Arch: foreign
Package: nghttp2-proxy-dbgsym
Priority: optional
Section: debug
Installed-Size: 5197
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-proxy (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2-proxy-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 5090148
MD5sum: f382426aa87119019d777337cfcf3f1a
SHA1: f59e0be0a82c1b986bc5f66b9d83328bcf0e229d
SHA256: 22db61ade06ad7ae141ae01afcb58c942dd4a11aaaeb001a7f55ba67daa9ede3
SHA512: 049521072e5718da3d75002aa9aa7ad8b898e313da8b419ed6e2e5d5c44cac750bc1fae1cbd5853c0691b2ce91c3b49b8451944fb30d749f34ce7177712fd787
Description: debug symbols for nghttp2-proxy
Auto-Built-Package: debug-symbols
Build-Ids: b505f4724ac516635239b445f0c76a6f07d14354
Package: nghttp2-server
Priority: optional
Section: httpd
Installed-Size: 184
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), lsb-base, libc6 (>= 2.28), libev4 (>= 1:4.04), libgcc-s1 (>= 3.5), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-server_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 90964
MD5sum: 425429b71ea5f0a098c7037d01a08e79
SHA1: 7d8ef56409fd42be011943e49cf8d4d9fba8d99b
SHA256: 5d3200d0466a36b7aee2f6e5fb6eefa67783cffd53bbd3ba2d13120f56af76e8
SHA512: f57c9e63dddad53f66220b8df33cb31d365df5b3660cfc7df37b1416248925bbe2d718a594d4610b43117b021a01d92ee2d367a6c0f4bb76462f317dcbd02127
Description: server implementing HTTP/2 protocol
This is a standalone server implementing the HTTP/2 protocol with
HTTP/1.1 fallback for clients that do not support it. It can be used
to serve files from a local directory.
Homepage: https://nghttp2.org/
Multi-Arch: foreign
Package: nghttp2-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 964
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: armhf
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-server (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2-server-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_armhf.deb
Size: 925428
MD5sum: 76f1c722bc6116ef749107971d1e2b53
SHA1: 005e02ddf05b1fa785650f3cb44a5ea9746a5cf0
SHA256: 2e4ab09a42e6ea4fc05a26931a48edd403d9929e5447818f84f8eb88026c50d1
SHA512: a6db3003a45b336368c3bd653f266a97e983faaa7e31fc552325ab0220b89df762de7c2b2a7cc759492f3f46608b594e55f53803e837d55733b457d82ccd9bec
Description: debug symbols for nghttp2-server
Auto-Built-Package: debug-symbols
Build-Ids: 1f5170f6732f6e109c594839c900e79f9b87c507
Package: openssh-client
Priority: standard
Section: net
Installed-Size: 3214
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.28), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Breaks: openssh-sk-helper
Filename: pool/target/o/openssh/openssh-client_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 847848
MD5sum: 7b0e0ce8eb2d90440f20c3187723826a
SHA1: 2846668adad2aa0f5c2b35437c26bab463c22c4c
SHA256: 02d895af4334e4b72f12c8bab5eda18f80ff5f9cf719a3ed1f6cab0c713d780f
SHA512: 4b40b84ea2d83c3bebbb4bca418d4b11afed18733fa6acc7280ea307438153b179344c936f7b992913ece0eb3acded1a640833d1c410f5ae0b74bc35fabfc39d
Description: secure shell (SSH) client, for secure access to remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the ssh, scp and sftp clients, the ssh-agent
and ssh-add programs to make public key authentication more convenient,
and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
ssh replaces the insecure rsh, rcp and rlogin programs, which are
obsolete for most purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 4228
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-client-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 3824296
MD5sum: a18a102fc6304e08c2ddd17b2926163e
SHA1: adbaf068e556780cc3d39be086db1f436b327cde
SHA256: 5ecbe39da62564feb535f76b7a126ccf280af0a148a00863725fadf7710902c5
SHA512: 4053bb694a0c87e52b6cff15716be6809210b12e43fc78fb59d3b3ee3b53429aeea46f05a0bf4a53cded4cc14d6be762d54d73baf3915172351eb6d3fca96c0c
Description: debug symbols for openssh-client
Auto-Built-Package: debug-symbols
Build-Ids: 0c53adece46101f80192b97c32aadad51005dbda 22749cb6a8af3baf30bf23ae983e7b9da07b5b75 2db8ebb4241db6d558ec9ff25343eccb932e48a4 6686985dcf34b1d738ad40ef03463f4c62ddef5d 82ce549c8f13a3cec74be376ddfd0e881c99280a 8ca10c60b31c78db29b5651c5a00daca581f207d 8cf617e3d1f138c67f92a3ca7154cfb514870eca b661601cd2ac245739511bc7c9f4e42df24ea086 b8db0aa1183647360b9089ef7ef8c833d2890431 f7591bea7301035413f35eee9597e4f34be194d8
Package: openssh-server
Priority: optional
Section: net
Installed-Size: 1296
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.28), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), libsystemd0, zlib1g (>= 1:1.1.4)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Filename: pool/target/o/openssh/openssh-server_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 349024
MD5sum: 260751e0735cfeb9b03c7a363ed55b93
SHA1: 0eb945dd87cb1b14282cbdccd749f7cab4978d04
SHA256: d3e3e6fc6684a426ac6db848f9604172592c3d71906471e90e84a670dac29579
SHA512: 0c8e42fb8a008fe0a7f87c4e69b84e5dbad2460bf7d0b4ac4c056af6480d9afd7515ad85c73b014571183805e47988571c2dc59c6e84938da042615ebd4a168b
Description: secure shell (SSH) server, for secure access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the sshd server.
.
In some countries it may be illegal to use any encryption at all
without a special permit.
.
sshd replaces the insecure rshd program, which is obsolete for most
purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 1108
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 1020648
MD5sum: 93c0d816f2c80400d2d80ce7db4c986f
SHA1: bb3bada88e68b300e755f749e0a91d0c6e5e1585
SHA256: 40b21025f4207a740e33d8d76007b50af0adcb6995d21852aa63d243538fa44d
SHA512: 74549d75708b03dfdf0d1ea74f2043b0ad1056deebbc054a2e185ad246a3295b4f60281be7be86d934b3ea4b33b2f93ebc8650b5e9cc37d2c2a524e1c922eb56
Description: debug symbols for openssh-server
Auto-Built-Package: debug-symbols
Build-Ids: 89a95fdde16fb0e6def4e50d28bacafa36927214
Package: openssh-sftp-server
Priority: optional
Section: net
Installed-Size: 96
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), libc6 (>= 2.28), libssl1.1 (>= 1.1.0)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Filename: pool/target/o/openssh/openssh-sftp-server_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 46244
MD5sum: 14d7c8641c79faa2499e7678a9e7a82d
SHA1: d05f8e00844d3658e3264b169b166ebd98253897
SHA256: 6cf5a98d1a82aebeb6e5618222f832010b98896db5fbc9d3a351bac276ae636a
SHA512: 9dddbe2ea0f7d85b7e810a54705cc3a551e7d10ed263d9f67ede1dedf4b0b071978e21619fbc89df87598b0914d6c163b237487245f926852c5d52aefdaf0db3
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
Ssh (Secure Shell) is a program for logging into a remote machine
and for executing commands on a remote machine.
It provides secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections and arbitrary TCP/IP
ports can also be forwarded over the secure channel.
It can be used to provide applications with a secure communication
channel.
.
This package provides the SFTP server module for the SSH server. It
is needed if you want to access your SSH server with SFTP. The SFTP
server module also works with other SSH daemons like dropbear.
.
OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
protocol described in:
.
http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
.
Newer versions of the draft will not be supported, though some features
are individually implemented as extensions.
Enhances: openssh-server, ssh-server
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-sftp-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 188
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-sftp-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 160456
MD5sum: f0b44153cacea058d4972ab0f0ea5f3d
SHA1: 31c977f85d1f34103ad0cafa5e42804516691568
SHA256: 9a1e2288feb9ad446e4b00aa25a2aa864b7991df8bfe3b01a21ca7aaca226a5a
SHA512: 8955e9447bc811e4631f257813bd6eb7f1d5e690070ea0210975fb6b5d9e78527098624bc2425aacaaaf0b2c147e4bcd62ca6f4d48553efe9102b3705edf9da0
Description: debug symbols for openssh-sftp-server
Auto-Built-Package: debug-symbols
Build-Ids: 68d9d5aa1965fc4044a526646ed4b6d9f71d6fad
Package: openssh-tests
Priority: optional
Section: net
Installed-Size: 4017
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssl, putty-tools (>= 0.67-2), python3-twisted, libc6 (>= 2.28), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/o/openssh/openssh-tests_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 886408
MD5sum: 910317359a17f7397f55fee2beb64d9c
SHA1: 7c1016099e4871cf9f5762891154475e8d1fd2b1
SHA256: 6619bf1a9d70c0e9797076badc0f8c1463a149f3d309b44c50ff1ef46002d4bb
SHA512: bd0d066a76e7000a0a99b638b28f086c945717f35925d45da354c6f211fdf6bc6db2ed6a77a2c6ecaaa0315b2a0866eba936b37576914f373e1f5f18852e26fe
Description: OpenSSH regression tests
This package provides OpenSSH's regression test suite. It is mainly
intended for use with the autopkgtest system, though can also be run
directly using /usr/lib/openssh/regress/run-tests.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: openssh-tests-dbgsym
Priority: optional
Section: debug
Installed-Size: 3001
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-tests (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-tests-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 2622956
MD5sum: 2e879b150eff79f44f55a41bd120a0ab
SHA1: 1744f8a2ba6c8416343e272bbf4cb862a8309ba2
SHA256: d3058871585ae55edad850ab3983641bbd8bb7b05e3c3251dade5cb9041cebce
SHA512: f823b21a3f0022a915ac1e613a9c46855f124c022427b32d3580e9ac013c1818400f5757a67e3a12c8bd9d8d1f351a0e804a92ca477c9115b430cc3cc9cef31c
Description: debug symbols for openssh-tests
Auto-Built-Package: debug-symbols
Build-Ids: 18a522c5c15fcac2b28b42f716e260b2c69163d0 1908548fabfccccc228cbd67aee24868418eef15 1b290128f3186d015440c08c1258e2eead55c520 4299bb8f885b9c88cbad9c326845ef9af9c110e9 53f3661ff135838dcb25859b1ad6c305293170b9 61dfbe65699ac121a16265a90d982c751b33f8b2 65d4fcdb2071632570811810bad85ff9ab3aee80 67537cb65f1784f520c98e667332001f4e279fe3 6c0c3bc29550052e3cb85521525b51af6fc5c1b8 6c168de7aea30e6321f921cea3d1933a101a3fa7 74f11b07b80f0ca839d5305e8ccfce84a3be6900 7aea7cd1c00ab8c8dedfef9ac8c2c4e5f2794751 8d78f71570c2c8f0f84522cefa46149a9133ae3d 94632ba10e38b9f149b5e010c02f03e3b6224101 cb4296a3cf1ff1ad2c6f1e3009d75f046c99c32b cf463450df4c23610391926175111c00a2345008
Package: ssh
Priority: optional
Section: net
Installed-Size: 270
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-client (>= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-server (>= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Pre-Depends: dpkg (>= 1.17.5)
Filename: pool/target/o/openssh/ssh_8.4p1-5+deb11u3+apertis1bv2022.3cb1_all.deb
Size: 259452
MD5sum: 22ea8f0f95966ee946050ac82f56b8d8
SHA1: 8809c26a993e7db8ac4f2f9f2b22a94cfd7e68a5
SHA256: d2e0dd81b472306b129f73973ddce09f4d0a830f3d419f4c6a71e873e7a69eee
SHA512: 58309a44ac4a8d179a04317e2f3ee0431c4e84b90f8c724fc7994e076568be2143194f527fd6ed72718bbb146d420b01ca1ae7b841a42e5e5ce4d7f99d42fc95
Description: secure shell client and server (metapackage)
This metapackage is a convenient way to install both the OpenSSH client
and the OpenSSH server. It provides nothing in and of itself, so you
may remove it if nothing depends on it.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: ssh-askpass-gnome
Priority: optional
Section: gnome
Installed-Size: 295
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: ssh (<< 1:3.5p1-3)
Provides: ssh-askpass
Depends: openssh-client | ssh (>= 1:1.2pre7-4), libc6 (>= 2.4), libglib2.0-0 (>= 2.12.0), libgtk-3-0 (>= 3.0.0), libx11-6
Filename: pool/target/o/openssh/ssh-askpass-gnome_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 272320
MD5sum: 8fa1392867ceb70adf57e4d6fb019ad3
SHA1: 4ec3545a59981097609fa52bccf058cbf59adcf2
SHA256: ce7f2857481aa811810c68ef7c1ed1f64f80ce0f30bc7356312a54a818017d2c
SHA512: 5e3cb0501b3f20819f909270116f3c4b24d59250126ec767e27cc35951a31e5a7aee0ab776bdb768cb1bbf9e481b7c0b00732a542c0a8bbd9f8f137004c3f78d
Description: interactive X program to prompt users for a passphrase for ssh-add
This has been split out of the main openssh-client package so that
openssh-client does not need to depend on GTK+.
.
You probably want the ssh-askpass package instead, but this is
provided to add to your choice and/or confusion.
Homepage: http://www.openssh.com/
Multi-Arch: foreign
Package: ssh-askpass-gnome-dbgsym
Priority: optional
Section: debug
Installed-Size: 27
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: ssh-askpass-gnome (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/ssh-askpass-gnome-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_armhf.deb
Size: 13044
MD5sum: 5f2c90a1712100b3f48072c1ee865130
SHA1: a9b8f6eea9cf4e274378f0838d97472a3f2eb144
SHA256: ab182f1f97b0e105327c1cedc80f746158d5d0d2510279e5e61b3330b493dee2
SHA512: cdef4d2b7f7b97d9b8c2663e69c46547977b164d3638e4c8539b4a7c8ca4e8f688a7a2ab48ed4015a1edd49b516993863bca365b7b7f438610492164f331a1a8
Description: debug symbols for ssh-askpass-gnome
Auto-Built-Package: debug-symbols
Build-Ids: 1c6b13576d97886b68b08eaa6f746a599ec2930c
Package: webkit2gtk-driver
Priority: optional
Section: web
Installed-Size: 1205
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libc6 (>= 2.30), libgcc-s1 (>= 3.5), libglib2.0-0 (>= 2.39.90), libicu67 (>= 67.1-1~), libsoup2.4-1 (>= 2.47.4), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 566064
MD5sum: 769fcc6f4277bf7305c657adaa2b9e25
SHA1: 842e2eca70a951ee52d29145b4419006a38f9881
SHA256: eff7f795ca4ccf622c332af7320952ce70e567d3a7bdc63eaf9b456367bf92e0
SHA512: 6597710084aeef2dcb2abfcdd0b5d9be0b259ebff51865b84a1fd1fa5d1767009ca2ad58a76adfd278658230704349da653571454f1777313de082c4f4269133
Description: WebKitGTK WebDriver support
WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple's Safari browser. It is made to be embedded in
other applications, such as mail readers, or web browsers.
.
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
.
WebKitGTK is a WebKit port designed to be used in GTK applications.
.
This package provides the WebDriver service implementation for
WebKitGTK.
Homepage: https://webkitgtk.org/
Package: webkit2gtk-driver-dbgsym
Priority: optional
Section: debug
Installed-Size: 2033
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: webkit2gtk-driver (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_armhf.deb
Size: 1622004
MD5sum: 6c7a4ed10781aa327f58c2af8c283ca8
SHA1: 7bb793e96b6fc60994c57a45369c8865f6e90e34
SHA256: f162aaecb4537047e901b7c98b001aded45e11d837234f3c9a1fc3eadb31b86f
SHA512: 3ffc34bd67f6eef4606624a445fc48c8b33176b5d397d757dfeb5c3a8eededc3d25520f46139063e91fb04054ebe912cb9fd5b57c7ebaed43d3853a5748fe60f
Description: debug symbols for webkit2gtk-driver
Auto-Built-Package: debug-symbols
Build-Ids: da17d58348ea7b6fb95eaa4ffbee10e35c43ab52
Package: xdmx
Priority: optional
Section: x11
Installed-Size: 3415
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfixes3, libxfont2 (>= 1:2.0.1), libxi6, libxmuu1, libxrender1
Filename: pool/target/x/xorg-server/xdmx_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2888960
MD5sum: 1e4ce4d69b5f39f166ca4e4272fc39f3
SHA1: 9e04eb08b1c97571d2b52c6aaf91927663c6a85a
SHA256: 7bbf17ce03895e0b6b1446395edab4af4b64f6e551cfe9fe96e28fbbead8544d
SHA512: 4a11ee23ea283b47d4c9b621ca10b083ea5a68fb9c3e26810e2fab4b094ae363572ec1fd4d964caad14f9f51a9bcbcfd87f51dc82858e6bb5b2b9d6bdf1b5f44
Description: distributed multihead X server
Xdmx is a proxy X server that uses one or more other X servers as its
display device(s). It provides multi-head X functionality for displays that
might be located on different machines. Xdmx functions as a front-end X server
that acts as a proxy to a set of back-end X servers. All of the visible
rendering is passed to the back-end X servers. Clients connect to the Xdmx
front-end, and everything appears as it would in a regular multi-head
configuration. If Xinerama is enabled (e.g., with +xinerama on the command
line), the clients see a single large screen.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xdmx-dbgsym
Priority: optional
Section: debug
Installed-Size: 3047
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xdmx (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xdmx-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2869276
MD5sum: 255b3dfb332f8f4ee1d50ae6544bb6db
SHA1: 22c7c740320ad5c99f849727786bfbe23e7c28ed
SHA256: bc1c29f3b1186ee94e2fb29a01744addf3c5e17b556e19044e075d6f1d5a5a92
SHA512: 332a24c2bbea3008fadc73faa3d77fc653a77c4f5111c7e1c87ebb0289a1f34692efb24009d809811e7d6af13aa6c63ac8dfab193aaafdbba60db6391238496d
Description: debug symbols for xdmx
Auto-Built-Package: debug-symbols
Build-Ids: 9169302a085545a2d40ffcaec7efd3aaa2b947a0
Package: xdmx-tools
Priority: optional
Section: x11
Installed-Size: 2471
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xdmx, libc6 (>= 2.4), libdmx1 (>= 1:1.1.4), libx11-6, libxaw7, libxt6
Filename: pool/target/x/xorg-server/xdmx-tools_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2320524
MD5sum: f810347fef5afa89df5793f78abd1bcf
SHA1: f477781aa8f2a4dc20a024da8fa109a0a7e78772
SHA256: e85cf6643167144f7f5e495ce8776a8e508dd2bd1ec1067fe2d0eab31b25043d
SHA512: 9eea644cf7ad4d424f01856898fe6b2b2f76b0487d0a18ef21c9840e01fd68f8917d531ed81c34aad7260a1a4039b91ba4f2e7590cfde111e83c5123298905b9
Description: Distributed Multihead X tools
This package provides a collection of tools used for administration of
the Xdmx server; see the xdmx package for more information.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xdmx-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 293
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xdmx-tools (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xdmx-tools-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 196992
MD5sum: f04575b340379e00e7fc35627e6dd73d
SHA1: 97bda6ad924817bf0194199544138d5577565bc6
SHA256: db2791013f54dfeb3e09113755144fe1ccedba04d90af39c41fa11b5ad9dc449
SHA512: 712b07fae9915b338d9d5fe08dfd4107a184cec0f56454961ce3b95e9e3a04ca41140edc58f310c1209e58ccd141aee84f06b34459f04443e0e516ed1b12ae43
Description: debug symbols for xdmx-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0eae155672aaa7c1dbf98107a173ecebf9654335 24cf56895757fac733a3891645975c3ed8a7b449 44ee241b6bec2478e825d2fc464cc7fc49079aad 460256b820c315e36b42922783f7d38dfbd5a59e 4d4efaaf4b79827fd7508cf3bd43d987f475a846 4fe612b64e63f0671aae68e789102f2c5f0da049 6c5d5c8f8ff8800a372330656f8e29586a76fb86 8e09fac02b1607b20d652153daa81b4ae39e419b 967fa9c7b112406385f5142f316e9c6aeafa9728 a22d644e6020770527665bd5dba74828abcaad27 d629e94078caa8b726ab122ff731f90fab6e1cd1
Package: xnest
Priority: optional
Section: x11
Installed-Size: 3301
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.13.2), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfont2 (>= 1:2.0.1)
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xnest_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2822152
MD5sum: 2bf201654e8ae6d2dbcd05be1b729c09
SHA1: f4d0a7d1377407db914108444c4a69cf76a84cb0
SHA256: eec2fef027a6f2c86ac5880a5f183e4be2c42bef39e2caa910016f17ae8567a4
SHA512: f856639a6379330abb6329afe144afe5e4d9cba8a43024c7cafc652f02c59eb740ab0867a42f93dd88b79708fc3282f7d92d500c6d6fe8c8f62267f8ed222676
Description: Nested X server
Xnest is a nested X server that simply relays all its requests to another
X server, where it runs as a client. This means that it appears as another
window in your current X session. Xnest relies upon its parent X server
for font services.
.
Use of the Xephyr X server instead of Xnest is recommended.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xnest-dbgsym
Priority: optional
Section: debug
Installed-Size: 2768
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xnest (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xnest-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2594012
MD5sum: dba5f04ade4caa27d4bb6e93db56abb2
SHA1: 5f6d0f646276346c97f13bab640a979aa477d34d
SHA256: 0350abd7c6d3cb7db4db11fa8765d3507617c27a5807d5ca675b667efd970395
SHA512: 882cf44513f1d53e907f071374dc6de3ae6cc90bd9ca3d6b133fde8e0bafa6f10f7dce62db0b30d34aac619879f8452289299d80bfe4a486bc977097903aec3e
Description: debug symbols for xnest
Auto-Built-Package: debug-symbols
Build-Ids: 6755d1f93e458047acd84083be86a6fa1fedcb1e
Package: xorg-server-source
Priority: optional
Section: x11
Installed-Size: 7411
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Filename: pool/target/x/xorg-server/xorg-server-source_1.20.11-1+deb11u11+apertis1bv2022.3cb1_all.deb
Size: 7497588
MD5sum: 955e796a84fdd945fc0c559e443fa58b
SHA1: 952b1251c13ddc84d6f5d0e018a2cbde056a720e
SHA256: cd7c470528a06258f43528d2abc6d82657bf9370dfad1093ddc00248b46bbb49
SHA512: e08044888f3383692ad36320e21a01b691ee2b950763e1506b52bf0d733d7490925145537248ea389304b40870d1f776d8b3e6d3656d22ac13572d41d7bddfc6
Description: Xorg X server - source files
This package provides original Debian (with Debian patches already
applied, and autotools files updated) sources for the X.Org ('Xorg')
X server shipped in a tarball. This enables other projects re-using
X server codebase (e.g. VNC servers) to (re-)use officially
Debian-supported version of the X xserver for their builds.
.
Unless you are building a software product using X server sources,
you probably want xserver-xorg and/or xserver-xorg-core instead.
Homepage: https://www.x.org/
Package: xserver-common
Priority: optional
Section: x11
Installed-Size: 2359
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Replaces: xserver-xorg-core (<< 2:1.5.2)
Depends: x11-common, xkb-data, x11-xkb-utils
Recommends: xfonts-base, xauth
Filename: pool/target/x/xorg-server/xserver-common_1.20.11-1+deb11u11+apertis1bv2022.3cb1_all.deb
Size: 2296508
MD5sum: a69f38be9048912572db46b503549976
SHA1: 6fc43bcbf1304c46212b1f93396384f0e215e4b4
SHA256: 97bdb1c78c3575fdd1ecefb5cdb87d3efd1ecd0f7dbf830c1edffc7380d1dc2f
SHA512: 86737819de5c21870800eb653587fbcf76feb4173de09844e2927860014343541f5e110c0d526d3d69437f02f9a6a7786881994c200a62ed66f39ab2c9b89963
Description: common files used by various X servers
This package provides files necessary for all X.Org based X servers.
Homepage: https://www.x.org/
Multi-Arch: foreign
Package: xserver-xephyr
Priority: optional
Section: x11
Installed-Size: 3617
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libepoxy0 (>= 1.0), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxau6 (>= 1:1.0.9), libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.1), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-util1 (>= 0.4.0), libxcb-xkb1, libxcb-xv0 (>= 1.2), libxcb1 (>= 1.8), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xserver-xephyr_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2990964
MD5sum: c28380f55f09f3282cf008b916c23ddd
SHA1: f292cfdf59ccd2ae9c49d91707c122c5537def0b
SHA256: 4bcb5abb280c65218a97277b99fbbf1bbc2bff309884b9268bc2653d7d33c01e
SHA512: 2a9fbc52d2f2031b3cff65a166028fcfa0ab09abedddb9b4d99a40c9cc5bcfa07ff140672f2cb1f60e9bc1f113301baa7828a29120d29d226e511186df164f90
Description: nested X server
Xephyr is an X server that can be run inside another X server,
much like Xnest. It is based on the kdrive X server, and as a
result it supports newer extensions than Xnest, including render and
composite.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xserver-xephyr-dbgsym
Priority: optional
Section: debug
Installed-Size: 3634
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xserver-xephyr (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xserver-xephyr-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 3426272
MD5sum: 96be1808973e42c03ff254fd731b91d4
SHA1: f6af21f7df46ba584bf5a2bf570ba8fdc3777d20
SHA256: 07349c4e1138ead0a1f3dc0eda21f27d7dbf9984c3f9b0325b765810a4f39428
SHA512: 31e338cf0081a7890b3271aa62245aa6abdcaf56e52c1cdf2466e5883892c23de075edeb642bee7ab68783e2102c61f4c4416c6135b41dc5a19433f2b4a1e44e
Description: debug symbols for xserver-xephyr
Auto-Built-Package: debug-symbols
Build-Ids: dff863096eefbdf1596e9ae5f13e7414d9ace5ce
Package: xserver-xorg-core
Priority: optional
Section: x11
Installed-Size: 4477
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Replaces: xserver-xorg (<< 1:7.7+10~), xserver-xorg-video-modesetting
Provides: xorg-input-abi-24, xorg-video-abi-24, xserver-xorg-video-modesetting
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), keyboard-configuration, udev (>= 149), libegl1, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.4.66), libepoxy0 (>= 1.5.4), libgbm1 (>= 17.1.0~rc2), libgcrypt20 (>= 1.8.0), libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.10.2-4), default-logind | logind
Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable
Conflicts: xserver-xorg-input-evtouch, xserver-xorg-video-modesetting
Breaks: libgl1-mesa-dri (<< 18.0.5), systemd (<< 226-4~), xserver-xorg (<< 1:7.7+10~)
Filename: pool/target/x/xorg-server/xserver-xorg-core_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 3340024
MD5sum: 886267d3b89bcc51026ab7f2d8964c22
SHA1: c53584e64289e34ab3447675625b3b74ca59adbe
SHA256: 7df89b98b6dec10b9db7dfb7e08b0350c6e6b9aa5af8ecaf86edd9c193e66f20
SHA512: ba2014901858b6ac3bc58307b5b5c6da3a4cc86f74d45d40d8a631c4f9181a9195fdb84454b38c625f343139dadcf39ef0f440b673e3efdc075fcf75c9e314dd
Description: Xorg X server - core server
The Xorg X server is an X server for several architectures and operating
systems, which is derived from the XFree86 4.x series of X servers.
.
The Xorg server supports most modern graphics hardware from most vendors,
and supersedes all XFree86 X servers.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xserver-xorg-core-dbgsym
Priority: optional
Section: debug
Installed-Size: 5487
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xserver-xorg-core (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-core-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 5098868
MD5sum: 8f9f2ea4c53833bd68d5f3e92bae7a3f
SHA1: 537dd4931c314f5a44abb69b8d71f378224710d4
SHA256: 389708b526b8c9be63d5d75cf2e7fd673917deb0368a7982f6cca14bb4ba4876
SHA512: 7678245accd4b28dde22de39e3ba71bb61886bfaba6d7a04e2fb65a6a03d40e06582bfe5b93e3b078512a4123ad0686384f3d6a162a32410b70cd521d69864ed
Description: debug symbols for xserver-xorg-core
Auto-Built-Package: debug-symbols
Build-Ids: 146646a86051192de25990c1329b52edfd94de96 32f9fefb44f2cb0d3247708f628f16c9cfc2a465 498853e3dac80f1dc4cebf3b5205425547789bf2 4d736249f3ad07d622f0d82ffb9c425b1f092776 661afdf336ea7d2eb1a531e47b2da1d4f3bd01db 89eef070ed9cf3d1615f5da929a898f44456d1f3 8ae28ed0723e869007f6b022d387907364f822a3 bd2fab42c975951559f276e435f5914059eef689 ca849f4beeeb120752ae9d1d3c4d478727288f6d da1cd24e827e407c7c8a0ddd2cefbac5ea8fe45a dbf3bd83902e41e067735e97fa51eaee3aa12f30 dc1789709dfbfe69fd68dfa5d56a1c13ededeb9a e039712b33903dfe3a23e3ee6dc42fcef691252e f1beddc62411136d395d553605baef63f3f635d3
Package: xserver-xorg-dev
Priority: optional
Section: x11
Installed-Size: 3556
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: libpixman-1-dev (>= 0.27.2), x11proto-dev (>= 2018.4), libxfont-dev, libxkbfile-dev, libpciaccess-dev, mesa-common-dev
Filename: pool/target/x/xorg-server/xserver-xorg-dev_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2470000
MD5sum: b7320950d905e472c5109e67f0803b57
SHA1: ab737813c544e25d5b46f53c2421bfd5674d7f82
SHA256: 992f4358417f4cab5e40076633656e7ea8a35086123298e08b9d84d2c56d4007
SHA512: 979abb9e884e7c4ea22bd8e37b6fe6afed004e3c2223328ea77634fb5a6a621744e200f88804ac002449edf60ccba0f4e6d2bf6ba05a1ffce2f69264c81dfbeb
Description: Xorg X server - development files
This package provides development files for the X.Org ('Xorg') X server.
This is not quite the same as the DDK (Driver Development Kit) from the
XFree86 4.x and X.Org 6.7, 6.8 and 6.9 series of servers; it provides
headers and a pkg-config file for drivers using autotools to build
against.
.
Unless you are developing or building a driver, you probably want
xserver-xorg and/or xserver-xorg-core instead.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Package: xserver-xorg-legacy
Priority: optional
Section: x11
Installed-Size: 2386
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Replaces: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), libc6 (>= 2.4), debconf (>= 0.5) | debconf-2.0
Breaks: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2301908
MD5sum: 9bc51c78cbf814d7c6798499ccdb8948
SHA1: 7bd63f4e4b019b142dc9e1b5be2072e42dfd78fd
SHA256: 2c290714150788024658b51198df1cae7d96f266da59b527397260b70809d3dd
SHA512: 3e0274a5e3ee610e972c909c44e0c7d53c90f01463d1dbfcafbe72001f075d4a57097874f36769a9b81250dd849c1c681eaadaa2c4cf7bcf074ce72aa0cde278
Description: setuid root Xorg server wrapper
This package provides a wrapper for the Xorg X server, which is
necessary for legacy drivers and non-Linux kernels.
Homepage: https://www.x.org/
Package: xserver-xorg-legacy-dbgsym
Priority: optional
Section: debug
Installed-Size: 23
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xserver-xorg-legacy (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 9640
MD5sum: 6fb814615d2de216ac26c37e7d1c478f
SHA1: 86ff070263da19165190962e77b994c20060651b
SHA256: 6fafb183b114b9d6008d754420868263bb60fd2ed2f0264581139ef19050ab39
SHA512: 47a2618a82b07a736d5262665dc81c2734172b385926b386e15c7c7c0f70cf7c2dc2923e13f3bdcdac85fd2010e3174e2bb4a6452a9f37c79a09c82d6448b23b
Description: debug symbols for xserver-xorg-legacy
Auto-Built-Package: debug-symbols
Build-Ids: abe49138941fb5492f0c88c9395c1b0364606b13
Package: xvfb
Priority: optional
Section: x11
Installed-Size: 3393
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1)
Recommends: xauth
Filename: pool/target/x/xorg-server/xvfb_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2877664
MD5sum: f8bc30f2d1f4d3db640bd055dbc98791
SHA1: 27af1ac5f3c23af7332e09d0921c977fc8a7832c
SHA256: d32a14e17c113bfee6a1710fb86ad35ce75105e2dcccc695038a9867ee8d865e
SHA512: 49105af6869d208b407c8aa1ad877df03d36cf18b7c8233fc85da9aa1ebfddda0c8f78c435f17d0cb6b80fd9ed4079cbb655b8519747675feb00190a98b3d00a
Description: Virtual Framebuffer 'fake' X server
Xvfb provides an X server that can run on machines with no display hardware
and no physical input devices. It emulates a dumb framebuffer using virtual
memory. The primary use of this server was intended to be server testing,
but other novel uses for it have been found, including testing clients
against unusual depths and screen configurations, doing batch processing with
Xvfb as a background rendering engine, load testing, as an aid to porting the
X server to a new platform, and providing an unobtrusive way to run
applications that don't really need an X server but insist on having one
anyway.
.
This package also contains a convenience script called xvfb-run which
simplifies the automated execution of X clients in a virtual server
environment. This convenience script requires the use of the xauth
program.
.
More information about X.Org can be found at:
<URL:https://www.x.org>
.
This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Multi-Arch: foreign
Package: xvfb-dbgsym
Priority: optional
Section: debug
Installed-Size: 2955
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xvfb (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xvfb-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2789168
MD5sum: 9775f774529b3ffe8e18498f0a528ff6
SHA1: c1499bea1d7752f66ebe029375a28491f1a79aed
SHA256: cab333b4a531ca040022dfbffe14b9b3c17f830ef5311317b2c3ae77afa183f8
SHA512: 59c94f0b1fa34168c441733d6665ca494326d92c7c944a371b41119403bcd207c7f0a78c32229049703edc76306b7844f3228dae0daf8b0d55189197139c6549
Description: debug symbols for xvfb
Auto-Built-Package: debug-symbols
Build-Ids: 3f1ab8d7d89f7bb1d028ccf6fbbf2711985c5c87
Package: xwayland
Priority: optional
Section: x11
Installed-Size: 3408
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libwayland-client0 (>= 1.9.91), libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Filename: pool/target/x/xorg-server/xwayland_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2884396
MD5sum: a3554c0165ccd8e9a18a33b724f2799f
SHA1: c293d4f4a04240f40e73936b0d4c128af71d48d4
SHA256: 013852a1e24000db3b40193dbf84499bea28a325f6a3d09abe41f0f62c9dfb5d
SHA512: 3e9b2ea8b8a33d5748404af2fe10675807e06667c69d528e3e4236f40d7efffe35b5f0f168a8e0da4593959e811ec7960217f095a4cab13c7d2866d267d73bda
Description: Xwayland X server
This package provides an X server running on top of wayland, using wayland
input devices for input and forwarding either the root window or individual
top-level windows as wayland surfaces.
Homepage: https://www.x.org/
Package: xwayland-dbgsym
Priority: optional
Section: debug
Installed-Size: 3100
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xorg-server
Version: 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1
Depends: xwayland (= 2:1.20.11-1+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xwayland-dbgsym_1.20.11-1+deb11u11+apertis1bv2022.3cb1_armhf.deb
Size: 2922048
MD5sum: 23db1019beac057bfcf9575d0c59c6e7
SHA1: 60e0c9ff374b41ecd7003f34c72db7470b945d34
SHA256: 8ef235ebe5745b680c868824c1208c1b834353b592bbb8d454743c797cb04d96
SHA512: f645f46a6780f504e99007a538ce7ca5b3cb27ac8a5d00dc2ab618b5bf740abc39284ded5b32f676f99934d60f13eebf143cc5580b8d2d00b230923019907c21
Description: debug symbols for xwayland
Auto-Built-Package: debug-symbols
Build-Ids: 6ea0e287e0993c32f961ca45befb91f979d574b5