Package: bluetooth
Priority: optional
Section: admin
Installed-Size: 76
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez
Suggests: bluez-cups, bluez-obexd, bluez-meshd
Filename: pool/target/b/bluez/bluetooth_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_all.deb
Size: 50268
MD5sum: 3fa6f5c4161f9df64b21ad75b86e0d87
SHA1: fe38d7929d2c6e7670c5e5e4705eedff63b570e9
SHA256: e2c61c2be3bcce7fd4f9acccc94e4cf1ae03e05babf3ed4d09fde6b0ff43dbbb
SHA512: 7122d55e55f1b7a663ff762d7a796b84bc2beb7353fc8094ed7b19a4378342eeacebfaad8601c2a16f2a1a1644253162589fc49947c99626e8bde7ec72d18f93
Description: Bluetooth support (metapackage)
 This package provides all of the different plugins supported
 by the Bluez bluetooth stack.
Homepage: http://www.bluez.org

Package: bluez
Priority: optional
Section: admin
Installed-Size: 5906
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: bluez-audio (<= 3.36-3), bluez-input, bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libasound2 (>= 1.0.17), libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libdw1 (>= 0.127), libglib2.0-0 (>= 2.31.8), libreadline5 (>= 5.2), libudev1 (>= 196), kmod, udev, lsb-base, dbus
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: pulseaudio-module-bluetooth
Conflicts: bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Breaks: udev (<< 170-1)
Filename: pool/target/b/bluez/bluez_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 1044864
MD5sum: de665f90b72d8d3cdf8bbed714420872
SHA1: c9f163e2f26a733a77833109b008c3901b8d5132
SHA256: 64786749f1942ad76cb3b681eb142a4b41d157ac32ebb8b971979558316d98df
SHA512: 8a8187f77bc37ea860b8e65c471a8290414d8b089e2663541cb002e052dea878529587ea4016df98ea36b98facff444436a3a4716c0dd2771e14558530363c43
Description: Bluetooth tools and daemons
 This package contains tools and system daemons for using Bluetooth devices.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: foreign

Package: bluez-cups
Priority: optional
Section: admin
Installed-Size: 296
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0), cups
Filename: pool/target/b/bluez/bluez-cups_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 117136
MD5sum: a139e9e7d9a3d95004c3c7d2dc5f36cb
SHA1: dbef63da6592d3d66519fa65cdd734979a15acd5
SHA256: 3ff0d3f54394f939913dffd9cfbc211c4f75555225713fd68dd748fc123056b9
SHA512: e0dad8a7742b465a4dd90615fa1caecc6138b77e830cbbb1cc44f33cb1d48e772aca04ac2bc691d4f60a32b6ec9e4af55e81af16b633b76dbe753c72e4c37709
Description: Bluetooth printer driver for CUPS
 This package contains a driver to let CUPS print to Bluetooth-connected
 printers.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-cups-dbgsym
Priority: optional
Section: debug
Installed-Size: 192
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-cups (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-cups-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 160064
MD5sum: ae43c7aff4bab0e105186eef4fe88a0b
SHA1: a3ea83609bcee5d6fb977395a1c93ac399769122
SHA256: 63b6903b8b1ffba11a8ff827bd81710cfd5e93add3bb4566ac8679f192de0ae5
SHA512: b32ab6268470a1dd68e64435ab788a486e442ee8690a55a9efcfa1cd0fbbd651a496a4f357c2a83e1f3db05ba11d70d6c97fd79b0bdf2544b725cc81700988ea
Description: debug symbols for bluez-cups
Auto-Built-Package: debug-symbols
Build-Ids: 70d5f88c3be8fff1b23372457d0118b6985f3aff

Package: bluez-dbgsym
Priority: optional
Section: debug
Installed-Size: 4793
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 4130604
MD5sum: 8b3266e8abcde45b021bbf4ba7c0d9e4
SHA1: 71b239ef5da2944060b7aceed2488b30148ba1ae
SHA256: e82903c0ba580eb00d63d180295cbdc365880525b57d56439634127d80d31740
SHA512: 04133a1803be9b49d845ea9f71bdec61b57484ce5a1242f942f4710ac2d00dea10f690a26a178e55330fbff3f4a94312d97f6806689ae270752d8e88fa5be625
Description: debug symbols for bluez
Auto-Built-Package: debug-symbols
Build-Ids: 054e5b19eac671a18a52caa4aa446ead4dff4faf 1549a3ef5692f5cda6369ba9457baabd115c2ed6 25ab9fdd47422f8018d02a0e6dfd7b49d4944f60 3054db9a54d0f49dac199f3bfd15dba2bcad696c 33a6ad069f003632ccd299c2c7de7fb58d1c7065 4a6a58979ef1bd441b634a0bf204a3d9abb84e4c 52f616644d03c52ee428ae529a39f16f94a445dd 541bfba63db4c4543cd5e8c836b8a84d232ad384 6018d4dd9087e29d2c49243e1b93852de5aa23aa 60513c3e2f9e6aa73b197c4201652c2a0bdaed8d 81b642a57a1503801a4e73b51b25781079e65a9e 83c3ef500152e13667ed0e5b50ad417770de239e 8849b6c2c30d179f6bc85265ef2efa57967e6856 8a77e5b4dd90e4a702c7c4c5f63ab43d8418798f 8c36d91b177d93e223700c30100f436be8ae70e5 9e91cff4904c826fd90cbb1e10a9e93075a685fc dc47efe9089531b6dff94f9edbce3581ad363094 e19dfeff29d1e88182376e05634da97d643c4291 f18dc27cde55b9c8ae3f7fb96ed18ba6b66c7303 f678fda4b820e14575c382380a9dfa16eb917fad fc66d4695f644a7e2cc1823494d4f923e02e2e2b

Package: bluez-hcidump
Priority: optional
Section: admin
Installed-Size: 585
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/b/bluez/bluez-hcidump_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 191072
MD5sum: cc603b5b57775ee970806dacf0a0b596
SHA1: e8798a28cf4c23cf867939be13b360b95e87f76b
SHA256: 31de1ffdc67632b4657e69f6f5eb4dd690a53e51eea4d2e69c7bf97687320288
SHA512: aef7bef4d09f4e5593933b8455357182ce4144617e673a3de06fe5d636534e4b7fb1a6e6f0be99a85b214a6e2bb896dd95cc674bbb9b65750c5278e33bf0c346
Description: Analyses Bluetooth HCI packets
 The hcidump utility allows the monitoring of Bluetooth activity.
 It provides a disassembly of the Bluetooth traffic and can display
 packets from higher level protocols such as RFCOMM, SDP and BNEP.
 .
 This was the software that is independent as bluez-hcidump, but this has been
 integrated into BlueZ from BlueZ 5.0.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-hcidump-dbgsym
Priority: optional
Section: debug
Installed-Size: 621
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-hcidump (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-hcidump-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 596824
MD5sum: 62357d80c9817394a97d3953cbc2b851
SHA1: 2bd48be3dd4289877e102ec14379c4e253c3c562
SHA256: de1c5871c41a1edad3081746476b5cebac476178d710523de304a4e783c42b9c
SHA512: bbdbfb8a12b4827a0dd2c62c9484f3f6c5a79f39675209b6eec87fa6811963078d9e3fd9f39db290a69d032d6585d3404cc66a36d45ca8a4988f148373ac0745
Description: debug symbols for bluez-hcidump
Auto-Built-Package: debug-symbols
Build-Ids: 042b47ea80a2fe3299390c679e5b0a0fc3071628

Package: bluez-meshd
Priority: optional
Section: admin
Installed-Size: 926
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libell0 (>= 0.17), libglib2.0-0 (>= 2.28.0), libjson-c5 (>= 0.15), libreadline5 (>= 5.2)
Filename: pool/target/b/bluez/bluez-meshd_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 276080
MD5sum: 7bb5a56b0eea1810716c45ed4c6b7674
SHA1: a9c5dd6e86c73f17e915edf1f3ae796ab5ecaad7
SHA256: 99af765c1d905e16493fd0f177835eff166ae79123a0efd8d4ddc33abf807953
SHA512: 4b304aea55fa0410e3dc258a4dcaba63620be3756d12e8320edc5199e3a9e7bbe49ca650d555958a2d935b4ee78cf64ad09bbf4344307e536f921a2211607135
Description: bluetooth mesh daemon
 The Bluetooth Mesh network is a new Bluetooth feature that extends "Bluetooth
 Low Energy (BLE)".
 .
 This package provides daemon (meshd) and tools that provide Bluetooth mesh
 functionality.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-meshd-dbgsym
Priority: optional
Section: debug
Installed-Size: 963
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-meshd (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-meshd-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 848744
MD5sum: c9671ea7e8601c098dfdf621e5abe295
SHA1: 3a7f7c21a15d80ed28a89e181abaf62e32148ecb
SHA256: 0e74d7a64e6832a460de57d844261cddb111666dc5878da1fe6c17b436208cc9
SHA512: 2aab3c3b5b68029f7b0a29630b5d42fff9049b1d32417f7d1f3d0a5bdca3ead27d95bc771f3de799a5cab6fe454bf4b29b46d74bb21959caa31fc6557f6e1a47
Description: debug symbols for bluez-meshd
Auto-Built-Package: debug-symbols
Build-Ids: 14f2b3f80a9612844b6cce0b107dc2be5d1173f4 6563b9234531b85be319a4a028314a3616030db5 b5589bc8bb96b8f412c362f7294ea8b879d2821c

Package: bluez-obexd
Priority: optional
Section: admin
Installed-Size: 648
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: obexd-client, obexd-server
Depends: libc6 (>= 2.28), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.35.9), libical3 (>= 3.0.0), init-system-helpers (>= 1.52)
Recommends: dbus-user-session
Conflicts: obexd-client, obexd-server
Filename: pool/target/b/bluez/bluez-obexd_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 220104
MD5sum: c7d6e905e1367220366219df7ebab2a2
SHA1: eecea6af23c80798dae3cc824d048c2da2156631
SHA256: 59201e107ce2ff0f16b92ee05c66a269bf9bb29ea6c970c964dca1e82ca0a0a4
SHA512: 690139c80f4f3aa90147dea6574369481aca130776b2a89c348cea1f61048fc1ea48c37a2968b75a5a227860e657355693a0b4e12e8d1a097d366bf0b4e84be1
Description: bluez obex daemon
 This package contains a OBEX(OBject EXchange) daemon.
 .
 OBEX is communication protocol to facilitate the exchange of the binary
 object between the devices.
 .
 This was the software that is independent as obexd, but this has been
 integrated into BlueZ from BlueZ 5.0.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-obexd-dbgsym
Priority: optional
Section: debug
Installed-Size: 586
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-obexd (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-obexd-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 507348
MD5sum: 9a22d9fd497886d2fe331e416eeb8c30
SHA1: ea673ac67e57743772cfb7b2333674005011df37
SHA256: c8692374f136283f088093920cfb551a74d06b08a49c872c00f871041b783cca
SHA512: 924732a2c2c52478c6ac80d5c7fb269d95f30da3a7262ea5771126141a0731b9e7431c50e186d68224411dd63f02890052d78ede90eef0be83b7a8078cea1822
Description: debug symbols for bluez-obexd
Auto-Built-Package: debug-symbols
Build-Ids: 813b8d120cb759f203a87f31c74c3fbaf4363f11

Package: bluez-source
Priority: optional
Section: admin
Installed-Size: 33004
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Filename: pool/target/b/bluez/bluez-source_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_all.deb
Size: 33710408
MD5sum: 62e9e71181b504aef7db6f22198aca36
SHA1: fe5f2161e878a5e0e71b3596afe924e6cd68abd4
SHA256: 4e2da91132010e903259310044735b635134c6d66d2c97497cc84e4b734c2ee8
SHA512: 86dd661ea9cb84b9004f3e7cd6c1e94504a893f91024bd2236632d97168d5a08b5989ce56edb72ea79c47b34eb9f1df8a812989edddc6124b368c9e08821cac0
Description: Source code for the BlueZ Linux Bluetooth stack
 This package contains the sources and patches which are needed
 to build bluez.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-scripts
Priority: optional
Section: admin
Installed-Size: 297
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: all
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Filename: pool/target/b/bluez/bluez-test-scripts_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_all.deb
Size: 83588
MD5sum: 4b34808d0634f5c67613b3497df8e3ef
SHA1: 47e265f9eb7360839493b9c4beef20404985d81b
SHA256: a356c219a5fd3650de1c2871d4d574cd953431004d7cfe6316884a45cc0cd30f
SHA512: 55c991fdfb3deacedc6e51794f37f1a2b1cfc3198ce7106897deeb19d3eb410b4939182da86a5ddef6856b77fe7a1f23da4cd28be8084344f996971c264f9bbe
Description: test scripts of bluez
 This package contains test scripts for using BlueZ.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-tools
Priority: optional
Section: admin
Installed-Size: 2871
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libc6 (>= 2.17), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.28.0), bluez (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-test-tools_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 327912
MD5sum: a2a9a600cb20e25e0abca36a8bbcd1aa
SHA1: 43290ddcdbb84a7be2b2259f3b259052f9722eb9
SHA256: c170ae3169232472fbd7c588218375cb9059160e448c9d5af9aa446762d5fb40
SHA512: 4ade85fe6691ee649583e2f3ab5105df48e537477111ed261464133d2b5aefc291be47e3bada05bc66691ccdcebfad2f96dd93d7ceed1bc8089166ef256074ea
Description: test tools of bluez
 This package contains test tools for using BlueZ.
 .
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org

Package: bluez-test-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 2306
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: bluez-test-tools (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/bluez-test-tools-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 1899184
MD5sum: 29bbb35d1c7313eed1fa7486228f0435
SHA1: 24294bf8db5c663c16eeea8aad1589b2ff486767
SHA256: 539afb6a0c917fe53171d6b8ac3ac828730d08a4e0a7b3ee083815d728a42c81
SHA512: 6837fa1c0850bc7cc3f130e162e9cb9cafdf66a5b9fbbeb4444ca5d5eeb1fb8cde7c1f19a1af4341a1bee15794f054560be93c1de47f7b2a3afb2a8c0c5eb81c
Description: debug symbols for bluez-test-tools
Auto-Built-Package: debug-symbols
Build-Ids: 05a9889b56814c62d6c6f2c43b6620180d8df601 08f250ec893b143396b087c154d2cc6e9f0bcd64 14ff5421ae4cc167da5905629eadeff57b587bff 15c3e832788607e4dfd00812fb874f57fe81ef97 1999fc53e6bb3cf358d3899e054bba6f0aaf7f63 385618419a6d290e5ad09708c7bbf0222109caeb 4e2ff397676cbae09fd6f5492f312de6c635a8d4 6e6fe4302f68142a5590c7039e5883a28a12734c b0d13eac5293da6b2ad042de899802ec521d09ef b36b655d02ab9143050c69f28fb064da9341aecc b5e087a9c358f4c574142d8a9425817fb1dcce5a c4896a4b9ce70b1814a06c43411a034436fff3f0

Package: curl
Priority: optional
Section: web
Installed-Size: 428
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libc6 (>= 2.17), libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1), zlib1g (>= 1:1.1.4)
Filename: pool/target/c/curl/curl_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 268388
MD5sum: 6f1fb5b5e309eba524c6088893571398
SHA1: 76bb439b4c1050a94fadc9fd4847dd0675445039
SHA256: a8c8963dfb4b90f3a431ab22099c5f73ed709f57b7638aaeee300f79cf0c2b8c
SHA512: 0e29f30ba2cec3e02a57a2b545a4e4157871a6074ca18eb6386d17f0e850c48cdd9ac9c3b79926203ef6f6f0c7c40a3e61994866f6e3a26cebe78298b9416629
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: http://curl.haxx.se
Multi-Arch: foreign

Package: curl-dbgsym
Priority: optional
Section: debug
Installed-Size: 170
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: curl (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/curl-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 143608
MD5sum: f26fb7e27a9c5a22c870a3c330b71727
SHA1: ae1f9c3ee70bd9b2d5526a3681c5fb44ff1ec392
SHA256: a9461a2bad650717b9047db3b3f9aee252e1924baaeeea688fb0ff3c394cf927
SHA512: 225796f068586823672f47bc3101613775d8d676756c8e3a42a251f263127fa991440e343bec762bb7b41793fe1c30f6e3545667691c216c29d604ed2492b3db
Description: debug symbols for curl
Auto-Built-Package: debug-symbols
Build-Ids: e6a4d5e6adcf7f83bb17b17b50701b19c31b4054

Package: gir1.2-gst-plugins-bad-1.0
Priority: optional
Section: introspection
Installed-Size: 2074
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Depends: gir1.2-glib-2.0 (>= 0.9.12-4~), gir1.2-gst-plugins-base-1.0 (>= 1.18.0), gir1.2-gstreamer-1.0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (>= 1.18.4)
Filename: pool/target/g/gst-plugins-bad1.0/gir1.2-gst-plugins-bad-1.0_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 1955540
MD5sum: 73ca78bc6e48bc9d6157f7baf9dbe06b
SHA1: 72a3084ca0343d23de04955a9868790ed0246068
SHA256: 1a350c4d6e577beb8f4bd732791c2acdeea480e3f11ec9767d1d1dc80fd82f91
SHA512: 9f9c61bed7907f1a8232ab8872c669e38e57baa70448a254979c7029402c09caefd82a0ec1a15b0ebd374e2d40604bd25b75c0545ca701e00776531f0bef23b8
Description: GObject introspection data for the GStreamer libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains introspection data for the GStreamer libraries from
 the "bad" set. It can be used by packages using the GIRepository format to
 generate dynamic bindings.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gir1.2-javascriptcoregtk-4.0
Priority: optional
Section: introspection
Installed-Size: 469
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: gir1.2-glib-2.0, libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/gir1.2-javascriptcoregtk-4.0_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 213860
MD5sum: 0379d50c5c70cd484d2d400137c2d689
SHA1: 256e1ac4dd11be749a7103be094f9e741f2800e2
SHA256: e1fc4ac5c305574e31b503677dd275aba46653e2cf21a970e4449328860c36a6
SHA512: 112c76ad2885bd8682a02cf9c795e05ca811bf123db464fd7d8bf62467bc795ba35233567c325c5733eb47d4452e2c0ce69c2ee3aa78049db8088dcc6cb96f21
Description: JavaScript engine library from WebKitGTK - GObject introspection data
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: gir1.2-webkit2-4.0
Priority: optional
Section: introspection
Installed-Size: 762
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gir1.2-gtk-3.0, gir1.2-soup-2.4
Filename: pool/target/w/webkit2gtk/gir1.2-webkit2-4.0_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 266740
MD5sum: ee34fc15147b34df107b706a4537a71f
SHA1: 4f3679e8c4eab75c2765544b758f5deabf7478be
SHA256: 306f746a6c698b3e8f6808f750a33f81d2341781a6b73e5bd1b84de79749ed63
SHA512: ce12facacc2375b723f510f84627e1ce7fd93c054f65f7a5a0590341d034341966d45558b1f5144a3340189e1a278fd9b45d2cee0ad649add67ea113e05ebd03
Description: Web content engine library for GTK - GObject introspection data
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: gstreamer1.0-plugins-bad
Priority: optional
Section: libs
Installed-Size: 7703
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Provides: gstreamer1.0-audiosink, gstreamer1.0-audiosource, gstreamer1.0-plugins-bad-faad, gstreamer1.0-plugins-bad-videoparsers, gstreamer1.0-videosink, gstreamer1.0-videosource, gstreamer1.0-visualization
Depends: libbz2-1.0, libc6 (>= 2.29), libcairo2 (>= 1.6.0), libdrm2 (>= 2.4.47), libgcc-s1 (>= 3.0), libglib2.0-0 (>= 2.53.2), libgstreamer-gl1.0-0 (>= 1.18.0), libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), libgudev-1.0-0 (>= 146), liblcms2-2 (>= 2.7), liblilv-0-0 (>= 0.22), libnettle8 (>= 3), libopus0 (>= 1.1), liborc-0.4-0 (>= 1:0.4.25), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.22), librsvg2-2 (>= 2.36.2), libsndfile1 (>= 1.0.20), libssl1.1 (>= 1.1.0), libstdc++6 (>= 4.1.1), libusb-1.0-0 (>= 2:1.0.8), libva-drm2 (>= 1.6), libva2 (>= 2.2.0), libwayland-client0 (>= 1.11.0), libwebp6 (>= 0.5.1), libwebrtc-audio-processing1, libx11-6, libxml2 (>= 2.9.0), gstreamer1.0-plugins-base
Suggests: frei0r-plugins
Conflicts: gstreamer1.0-plugins-bad-faad (<< 1.11.91-1ubuntu1), gstreamer1.0-plugins-bad-videoparsers (<< 1.11.91-1ubuntu1)
Breaks: gstreamer1.0-plugins-base (<< 0.11.94), gstreamer1.0-plugins-good (<< 1.1.2)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 3434824
MD5sum: 4acc95c614c30825a803437d98a7f869
SHA1: d3427f02eca15130ca111d759d03b918386d18c4
SHA256: 8b85aff8be00dc4dbaa678eb4f5c7718b4b66bfff41f2e7db92f2fa5f855dd7c
SHA512: 5bbf4ce3d6a2b579f56027ab9b43766f9d0bf5de1709352100eeb7f09a1c5660e912f2d15511ed21179a0819d49a390ed7b3f81acc2eebdeca6613aeed788dae
Description: GStreamer plugins from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-apps
Priority: optional
Section: utils
Installed-Size: 1970
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Depends: libc6 (>= 2.17), libglib2.0-0 (>= 2.44), libgstreamer-plugins-bad1.0-0 (>= 1.18.4), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 1934120
MD5sum: 34ac62767c2998c87182d013d4359579
SHA1: 7214e03b917c0777be8ad7b600e00a97ab55e15e
SHA256: 0369e7831c26fee3205b107a7a1bf10f96360421f2764ba7f49a239ea4682233
SHA512: 48f723bd7680117016857005348de4275e5b297185bdef092106beb23fea423b0cfbe3ba0ae5bf5bd7a7fe7c0177bb8b2f7125cbb691469b582164d2c5548898
Description: GStreamer helper programs from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains helper programs from the "bad" set, a set of
 plug-ins that aren't up to par compared to the rest. They might be
 close to being good quality, but they're missing something - be it a
 good code review, some documentation, a set of tests, a real live
 maintainer, or some actual wide use.
Homepage: https://gstreamer.freedesktop.org

Package: gstreamer1.0-plugins-bad-apps-dbgsym
Priority: optional
Section: debug
Installed-Size: 37
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-apps (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-apps-dbgsym_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 19828
MD5sum: a236100433bf3baf62f73f5bcf3f18b0
SHA1: 57366aea8e81ec936825479fb47351a8f1d14fc0
SHA256: 890142f2a664acfe143b8dc98f7f018189e1d9d1eb944636ab324e052ce39771
SHA512: d94a897ac5af57e26d7a19520468430c977647686a2031bfe2bd9d72a98c3671e8d510f4291bd485e78dc84a9006440bc2fbbcf7a12202c68ab963dc44ec01f3
Description: debug symbols for gstreamer1.0-plugins-bad-apps
Auto-Built-Package: debug-symbols
Build-Ids: 849185cd26d428445d14dd5c001997b9a1dbc1e8

Package: gstreamer1.0-plugins-bad-avtp
Priority: optional
Section: libs
Installed-Size: 2042
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Depends: libavtp0 (>= 0.2.0), libc6 (>= 2.17), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0), gstreamer1.0-plugins-base, libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 1956320
MD5sum: 3b115e4d3034ddc19d7f9cbea2ab28fc
SHA1: dca7ecaf3481452bd9070a001557072c42bdd144
SHA256: fba706ce910c5bbde5fe337ebf30cb805bcb2c3910b332a3df0964eda4f6c612
SHA512: e3966cd1864e6bef981b622f400c31fe87d457f595ebf0212b19d71a31c3cb60cdc20cf8427b06de36c0e1a2d6159036ae631776366e98e0774020d7a7bb6c4c
Description: GStreamer AVTP plugins
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains the AVTP plugins.
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-avtp-dbgsym
Priority: optional
Section: debug
Installed-Size: 123
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad-avtp (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-avtp-dbgsym_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 97108
MD5sum: a9b5553cd3b201e5b8eda532310a8a7f
SHA1: c5ce50c903cf4281105c132840ed31b1db4c05ff
SHA256: 8806007db86530b4ac4f2b8c1abef4fd30b0e780bdc97be5ca1b75957819735b
SHA512: c7168178ed647a628997afe3b581cb16af357421a29b377198d2bdeaa719ec71d8722dd944003710e73e4fff51fd2d7febdf962a56db70084307a17c3cff01ea
Description: debug symbols for gstreamer1.0-plugins-bad-avtp
Auto-Built-Package: debug-symbols
Build-Ids: f3f447f7d676905a93588ef25b6d72f03ecb438f
Gstreamer-Elements: avtpaafdepay, avtpaafpay, avtpcrfcheck, avtpcrfsync, avtpcvfdepay, avtpcvfpay, avtpsink, avtpsrc
Gstreamer-Version: 1.18
Multi-Arch: same

Package: gstreamer1.0-plugins-bad-dbgsym
Priority: optional
Section: debug
Installed-Size: 6443
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: gstreamer1.0-plugins-bad (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/gstreamer1.0-plugins-bad-dbgsym_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 5099944
MD5sum: 50e0c42298a2e86295fd8d67e332d9f1
SHA1: 5375565b2185841b45ec1619108e844f14322bd1
SHA256: cf84c14f828972544a94683b1bb0e66eb2a0a53392512255c5316673b11e3074
SHA512: 550cb6f894e018790d470094a8404c4488b6ebca68a269bb6f2ed54061ac2f91637e37506936ac05265ec833c943aed535bc1a15bd579f4a5f52822d76d5bd02
Description: debug symbols for gstreamer1.0-plugins-bad
Auto-Built-Package: debug-symbols
Build-Ids: 006a1c9db69f6e5513822c86176e34c57030637a 01b87c25a95ce2326edc7e3eed6075f04d2e927e 020a7e7be72de3352d6547875cc8162b2b5d4d65 0806e9e1b7edfad6c1aea0b0f85c5ec0b64514ad 0ac43f6d60af198818eb08f0f58febe80bbc8b11 0beb2d055dbd29571ff35ed7ae4aa545ae59c26b 11377a855959816b98dfa5f388373cdc4c49abec 1159061be26b3993f6dd71020081d6fcfd249e65 129e42ab5cf8d610ffc190d21f1cd2cec6204bc9 137aa73e5e7890487a90e9c41997d4d5c114f623 13d5135f96af3e1d8c10b840ad70720d829bc2ae 1622e228123fec41a7528dcbe4a70a396daedc46 16bd8221c415485dbff6b8574da7baecbf5a458b 17c9d003025da2c62db2cb7d58d624838d3ed064 192e1ae3ee640469e823a6b40be3a19346f98527 1c98df44899b45e6feb71e0157ca75dfc798e772 1d27d8aa38e0b71579f71a58d5b07b64b8a0bf8e 1f694a72100c3d0dad53bb42a50989699c983331 1fa6c7606341382f457fc1027fdfc3c2e39e2a03 2134365530867794d360fae548ccd6a5f721536b 24ddeb82f503a20eb7a7599949fa2b957f29397f 255dd7742b4ab982e5dfdc3d6e373c6b39f1d05f 2589083fe9242514be5d9beecd1e0ca63366f98b 282756923cb8aa4e39aef97b1cd25e4a165d35d3 2db2b5dc778599cb3343fffcb4e252f374004a24 2e2235ae3f9268140d0584bda87a77aca3376efd 309aed22961e86927d0de7786418e57f9aefca7c 33556571b0b28cce054f6b93370898dbc1c52b41 38ae7f10e7871904c4b4c9431831a5d433f1b9b8 39b5897b2ebb82d274ec81d4e1a2edca75632679 3b17727f9e5b4a92c6f39bf9582dd93aceba5893 41ef20ef74d8506d2debc4a5322c847169dec37f 434090f1ea07681732604e1056978f415446070c 45b23d3a083ce7dfd980f8df9d7cb91ae999cacc 49cda5d20e2fd2600611ede42453625b80811ded 4d2ba644933a4b40450723fc7ebd1b7a6adc7bd2 58a89fc4b95fbd99062849ba42af5118c1ec815a 5bbba8d5d98d498a026be47641b788ae2adc36e6 600faa7625db2c95ad69476ef910f3c7cb955fe1 61e75f0e2ee58702a574323b35ca6fbcb323405b 62858547f82a8d9524fd0f7696e88fc31a1df359 640311cecd3c058a4fbf12d51bdebdc938d7ead9 669efab81b521c9056e1c991e8d27307c398b291 671c0a9fc726b1a6d00ea203fc248c9b4c0f5deb 68011d2436096e704cd8dd326ffa6f022b5d66ec 69875e6d64f0f72678840c63ab679a6160404791 6ae9ed308f5e091add3dc0fdcfe76035f8d5baf8 6b36184a6b496345c28e3ad8a3b789260b4c1077 7591b60be6c8292b5e3a0601b79e66169fa7825b 7b8b6ed4f599ac8c255ab438432e49aae8da642c 84ecf4c6b00694f9a44c791c192fa9a9a04fc00b 88a03488ed92aea6ddc049f2b7128758ee862586 896e2085f0cb4d6b59649093d9474ff8f4757f84 8b9ad090417da0a8acb36b6e9521edc3f59bea6d 8e1e61b653fe07af9733c43d5579c89662ad2d35 8e310a241c4b2ef8f5d97a6c3bbe2aef606dba85 8e5286e183613e9a3fc4e4217307e04c43d6b071 8ef96e69bd42d2fc7b2d13592328af943ef8919f 9011fb594b1295ad67c1098eb9043d6ed963ef2e a43703e9f6aff1afa9aba16d8a863d936e7e5c60 a45c5d5b16341bd1337d46ab36cb452ba0199e9f a679eda5525eb5c28280491fa91c83141b40e20d b869cbd5c281292d241a9d62f45ea5b3de9b7f10 b8ea0d282053ae94e5d3cc71fc597ea5c96a6929 badadb5dd70dc4957fc1cad015574015b1e9e8dc bf0c36a22a9a28b95d5a4e061c5180f2148f2d00 c2c67621a6bc22d4a85a3f0d87a74ca6e0b2f450 c31f9386ebb40f8a2cf948aa133c00fc991cec9c d250ddd3579534942033cae9a27e47fa181637fc d38da4aa183588c821ee2bca8cef94de46640d56 d8eca41e0d6f2e9b6c11fe401244b71708971bab dae73fe26cfbe0f46ce5e0073579b1da4fbcae23 dbb0b9f8a5b1d2d6eb5ea29008c3c754e62dbeba dd23d4f4c9ae50907aa04eabd2869f9b16f401c1 df3a916cc1d446c553c31d4e20a191e86dfd379c e4624f7984a5ecfca42ea7a03f1503749d886590 e6e88db8465ba12a9e33c7d146844bc2f1012308 e7439e7a29f95cb505a5bb5a5217a1a0ee923d76 ecd658fd4ce7e8a57a98de38fd64aa4c26d5a3d1 f0dd2e249d5daa94b1603630cb03f1e3caafceac f21d3b9e141b079c67c21378563874b67cff036a f3b5f72199994391a60e1e688a7d677751dc2426 f53388ff065bd10ef80399649013f3c4da30b42b f6c5c5c31ff79daac7dbc9faf90b68449e8ab2ec f796fca2408ceef21a4b376024f6f3102b112b03 f83d1753a6b1adc2894908d0aba9541bf668074a fa8aa8f37f4cffc790ef204298c424ffa701fffe fcf604118551ff096af9061029ec6d4dea56ea04
Gstreamer-Decoders: application/dash+xml; application/mxf; application/vnd.ms-sstr+xml; application/x-hls; application/x-yuv4mpeg, y4mversion=(int)2; audio/midi; audio/riff-midi; audio/x-adpcm, layout=(string){ microsoft, dvi }; audio/x-aiff; audio/x-ircam; audio/x-nist; audio/x-paris; audio/x-rf64; audio/x-sds; audio/x-svx; audio/x-voc; audio/x-w64; audio/x-xi; image/jp2; image/png; image/svg; image/svg+xml; image/webp; image/x-j2c; image/x-jpc; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int){ 1, 2 }, systemstream=(boolean){ true, false }; video/mpeg, mpegversion=(int)4, systemstream=(boolean)false; video/mpegts, systemstream=(boolean)true; video/x-cdxa; video/x-divx, divxversion=(int)[ 4, 5 ]; video/x-h263, variant=(string)itu; video/x-h264; video/x-h265; video/x-ivf; video/x-vmnc, version=(int)1
Gstreamer-Elements: a2dpsink, accurip, adpcmdec, adpcmenc, aiffmux, aiffparse, asfmux, asfparse, atscmux, audiobuffersplit, audiochannelmix, audiolatency, audiomixmatrix, audioparse, audiosegmentclip, autoconvert, autovideoconvert, avdtpsink, avdtpsrc, avwait, bayer2rgb, bulge, burn, bz2dec, bz2enc, camerabin, cc708overlay, cccombiner, ccconverter, ccextractor, checksumsink, chopmydata, chromahold, chromium, circle, clockselect, coloreffects, combdetect, compare, dashdemux, dashsink, debugspy, diffuse, dilate, diracparse, dodge, dtlsdec, dtlsenc, dtlssrtpdec, dtlssrtpdemux, dtlssrtpenc, dvbbasebin, dvbsrc, dvbsubenc, errorignore, exclusion, faceoverlay, fakevideosink, fbdevsink, festival, fieldanalysis, fisheye, fpsdisplaysink, freeverb, gaussianblur, gdpdepay, gdppay, h263parse, h264parse, h265parse, hlsdemux, hlssink, hlssink2, id3mux, interaudiosink, interaudiosrc, interlace, intersubsink, intersubsrc, intervideosink, intervideosrc, ipcpipelinesink, ipcpipelinesrc, ipcslavepipeline, irtspparse, ivfparse, ivtc, jifmux, jp2kdecimator, jpeg2000parse, jpegparse, kaleidoscope, kmssink, lcms, line21decoder, line21encoder, marble, midiparse, mirror, mpeg4videoparse, mpegpsdemux, mpegpsmux, mpegtsmux, mpegvideoparse, mssdemux, mxfdemux, mxfmux, netsim, opusparse, pcapparse, perspective, pinch, pngparse, pnmdec, pnmenc, proxysink, proxysrc, removesilence, rfbsrc, rgb2bayer, ristrtpdeext, ristrtpext, ristrtxreceive, ristrtxsend, ristsink, ristsrc, rotate, roundrobin, rsvgdec, rsvgoverlay, rtmp2sink, rtmp2src, rtpasfpay, rtponvifparse, rtponviftimestamp, rtpsink, rtpsrc, scenechange, sctpdec, sctpenc, sdpdemux, sdpsrc, sfdec, shmsink, shmsrc, simplevideomark, simplevideomarkdetect, smooth, solarize, spacescope, spectrascope, speed, sphere, square, srtenc, stretch, switchbin, synaescope, testsrcbin, timecodestamper, transcodebin, tsdemux, tsparse, ttmlparse, ttmlrender, tunnel, twirl, uritranscodebin, uvch264mjpgdemux, uvch264src, vc1parse, videoanalyse, videodiff, videoframe-audiolevel, videoparse, videosegmentclip, viewfinderbin, vmncdec, watchdog, waterripple, wavescope, waylandsink, webpdec, webpenc, webrtcdsp, webrtcechoprobe, webvttenc, wrappercamerabinsrc, y4mdec, zebrastripe
Gstreamer-Encoders: application/mxf; application/x-bzip; application/x-dtls; application/x-gdp; application/x-rtp, media=(string){ audio, video, application }, encoding-name=(string)X-ASF-PF; application/x-sctp; application/x-subtitle; application/x-subtitle-vtt; audio/x-adpcm, layout=(string)dvi; audio/x-aiff; image/webp; image/x-portable-anymap; image/x-portable-bitmap; image/x-portable-graymap; image/x-portable-pixmap; video/mpeg, mpegversion=(int)2, systemstream=(boolean)true; video/mpegts, systemstream=(boolean)true, packetsize=(int){ 192, 188 }; video/x-ms-asf, parsed=(boolean)true
Gstreamer-Uri-Sinks: rtmp, rtmps, rtp
Gstreamer-Uri-Sources: dvb, rist, rtmp, rtmps, rtp, sdp, testbin
Gstreamer-Version: 1.18
Multi-Arch: same

Package: libbluetooth-dev
Priority: optional
Section: libdevel
Installed-Size: 767
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: libsdp2-dev (<= 1.5.2)
Provides: libbluetooth3-dev
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1), libc6-dev | libc-dev
Suggests: pkg-config
Conflicts: bluez-pan, libbluetooth-dev, libsdp2-dev (<= 1.5.2)
Filename: pool/target/b/bluez/libbluetooth-dev_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 237872
MD5sum: b7ab77a5b2d2889a51f674ebcff4be90
SHA1: ebb800d3c78c405b77e3af8cb21cf789842105f2
SHA256: 8c7ad7f6cc353e2fd109bab18010eac9d52b642515700c1dbee535289ebacab5
SHA512: c3612a0a3b81b101aa2c60934c108b710ab129a31f068833ff7163927c1948c837fe8acc25029221f9db82c2c207e8cc71df6b195ace5583be6ed32468e56beb
Description: Development files for using the BlueZ Linux Bluetooth library
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
 .
 This package contains the development libraries and header files you need to
 develop your programs using the libbluetooth library.
Homepage: http://www.bluez.org
Multi-Arch: same

Package: libbluetooth3
Priority: optional
Section: libs
Installed-Size: 307
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Replaces: libsdp2 (<= 1.5-2)
Depends: libc6 (>= 2.17), libudev1 (>= 183)
Conflicts: libsdp2 (<= 1.5-2)
Filename: pool/target/b/bluez/libbluetooth3_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 118140
MD5sum: f7019e76e2be2fe8ecb302ba6fd62224
SHA1: 1b470a56b94bfc8d051d3d848c02346bd3c5970b
SHA256: cbed76333c235a83353cd5b517f97dd0a06507ee573dfdacd105f3559d14996e
SHA512: 8a470b5b62dca106c5ad7f017a5b6a701d7551b6b290f968bc1fd8c3804853bd72cf88a0f21173d2c1111d92b203c00ac5997e5ea9939fd96d56f5bdc4094254
Description: Library to use the BlueZ Linux Bluetooth stack
 BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source
 project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Multi-Arch: same

Package: libbluetooth3-dbgsym
Priority: optional
Section: debug
Installed-Size: 173
Maintainer: Debian Bluetooth Maintainers <team+pkg-bluetooth@tracker.debian.org>
Architecture: arm64
Source: bluez
Version: 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1
Depends: libbluetooth3 (= 5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1)
Filename: pool/target/b/bluez/libbluetooth3-dbgsym_5.55-3.1+deb11u1+apertis1~v2022bv2022.3cb1_arm64.deb
Size: 134152
MD5sum: 8f69569f1a42ac3896313b846fc0ab3a
SHA1: 2db8d0a7435d0205b66657cfba274ac45ab10e26
SHA256: f68bd1d36ce71aba1ab6e77e982ae729763f6e9411f8ff6b14105af43bce964a
SHA512: 5d8e7ec2a9c6ca9d736079b8437617960c77607cca2d5b1eab322bbdd72baee21a6d112a0af4bac57283555f792edc246af37fbafee54d0c1a4645c4f19fbe84
Description: debug symbols for libbluetooth3
Auto-Built-Package: debug-symbols
Build-Ids: 08ff1268d967096e6bb6728dd0b8717f9e148d71 83bfe99d719355ce1ba6a5230df3da37933b3dda
Multi-Arch: same

Package: libcurl3-gnutls
Priority: optional
Section: libs
Installed-Size: 705
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgnutls30 (>= 3.7.0), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnettle8, libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-gnutls_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 325768
MD5sum: 87aaaa5684447bb546865b873959f44b
SHA1: 2ea31a198995f25052e356bfe9990a983478248e
SHA256: a7ab79c04e8a6fccaea5366023db86d941514ab08498f01863b8b8f8311a4886
SHA512: 3a76b009f9a974415f26601655f2a5d26fcd62c2c8fbd25da933bcd2a783a69b05dde91b59908a2f0fe0f7e85193908d48136bf3f6ecc665ed2947f2ecf47912
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl3-gnutls-dbgsym
Priority: optional
Section: debug
Installed-Size: 884
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/libcurl3-gnutls-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 817476
MD5sum: 9e8098c7d65c4bd958844b248497eb36
SHA1: 07babed36edefc7ded1379118bfc32c6e17d88a8
SHA256: de4900d8c83f37f8da5e1f9179d542b36b72742687b877ecf192ffab44ab398a
SHA512: 3be9a50261dcdc9bcc3c315d14a1f64c86eaae8e707704a47f8c5589af5d9e4b0ede11a0e940b990f7c33124f8933b79d7938c2fb6020437e159b127d6df82f3
Description: debug symbols for libcurl3-gnutls
Auto-Built-Package: debug-symbols
Build-Ids: ffc69c0080cee6c5ace6d2a4c53a61d20ca17604
Multi-Arch: same

Package: libcurl3-nss
Priority: optional
Section: libs
Installed-Size: 725
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libnspr4 (>= 2:4.9-2~), libnss3 (>= 2:3.44.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Filename: pool/target/c/curl/libcurl3-nss_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 333428
MD5sum: b21a07168686c79a419c3c9f5a6e49b9
SHA1: ff09d90c10ef45c0cd416e8613d7a21dc0f9d266
SHA256: f7fa3df4407fe3c00fcbc3b676e8b864a12677bb220d1f684b1a0dd142957152
SHA512: a0f355df240fd55506f53a74bf769d28178f751bd196e9e14c1f52526c981eb97e7f1b671a88c926a18d0e4c1271f03d1c8edd2919e0ae7eb6f5819a8603a62e
Description: easy-to-use client-side URL transfer library (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl3-nss-dbgsym
Priority: optional
Section: debug
Installed-Size: 925
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/libcurl3-nss-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 860108
MD5sum: 3973ab52a6f45d1dc212239f35c9226e
SHA1: 0ad69648bc3e31b5349a5c478e5364c21869c69a
SHA256: 85ca6364e6ec131faa98f7e400fbb5a9de8edb006fa60e5e1d74db3d72b5316c
SHA512: 7a9aeb37737a1ada1cfca774ff876f8842efff95e491c49fcaa9ce0513731fd120aec5decf77d0fac729c5b9320f268fbedaed70ad079a5f75233eeebe936fa4
Description: debug symbols for libcurl3-nss
Auto-Built-Package: debug-symbols
Build-Ids: 9f3354c6f254d2ed0e796cfcb027919aa6c9e5a9
Multi-Arch: same

Package: libcurl4
Priority: optional
Section: libs
Installed-Size: 712
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.17), libgssapi-krb5-2 (>= 1.17), libldap-2.4-2 (>= 2.4.7), libnghttp2-14 (>= 1.12.0), libpsl5 (>= 0.16.0), libssh2-1 (>= 1.7.0), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Filename: pool/target/c/curl/libcurl4_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 328228
MD5sum: b2b8968bf047453f841bd6e940534950
SHA1: 95ce66cdf0a51c332ab3ff1c169c5ff4ebb40245
SHA256: 3d7b959a04b33dac4c36468ebda644e3ecd182d021f9db6d4f56e1857d92ca26
SHA512: bb4d45bd7ca60b323be7ec1629acfce4052b8ce4bf8932f37983b0ec17257b0cf72249a1eaebfbd75490a332488c7a3f2b6c1599ccc82e9e84e4230b973bd763
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-dbgsym
Priority: optional
Section: debug
Installed-Size: 905
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Filename: pool/target/c/curl/libcurl4-dbgsym_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 836256
MD5sum: 08e01fe9f32b03204b3aac4be69f9f7c
SHA1: 831b3c544770db51dfac83ffe3f81ac839c156d6
SHA256: 378f2d4fde4da1a04a2e14d3774f211288e8b19df2319029912f5c03a33a27b0
SHA512: fffee2fde50fa24186c199f180d0f680b98cf833d2ef337408efaaed339657a31662f65c00542afe2f63b33e91d85cd7e4766cd0adaf86fdcbb8d284ee4723b2
Description: debug symbols for libcurl4
Auto-Built-Package: debug-symbols
Build-Ids: 24100252401a09046e7ff29e5337504017c06088
Multi-Arch: same

Package: libcurl4-doc
Priority: optional
Section: doc
Installed-Size: 1944
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: all
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Replaces: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Breaks: libcurl4-gnutls-dev (<< 7.30.0-2), libcurl4-nss-dev (<< 7.30.0-2), libcurl4-openssl-dev (<< 7.30.0-2)
Filename: pool/target/c/curl/libcurl4-doc_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_all.deb
Size: 1014956
MD5sum: 54c5f1761f1a7871fe36da36dfd36878
SHA1: a9c8e8204a2f2630fdde83c688bc5b0c51fb0b64
SHA256: 1a8a8643b43802d1429dfba612222dcc1e5d4659ed07c818ef825ab9e5b6ea3b
SHA512: da21423f51c0cef7568714702ef0dc0f90e92612d5e6c99331fce52ba21fb2b53747316c92735ebb68b9b50e98ea7c3bc70571154f4f9f6840037860045d729d
Description: documentation for libcurl
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the documentation files for libcurl.
Homepage: http://curl.haxx.se

Package: libcurl4-gnutls-dev
Priority: optional
Section: libdevel
Installed-Size: 1556
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-gnutls-dev, libcurl4-dev
Depends: libcurl3-gnutls (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Suggests: libcurl4-doc, libgnutls28-dev, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-nss-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-gnutls-dev_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 426976
MD5sum: e0ac353e021eb907eaf03d6a882ddf01
SHA1: 24e53e4a4f27dfcd61d16aa627fd9cf2d3f04907
SHA256: 3c7735d2a90d2917b8b767e58650101314ff56b8c15492b577d243303ea5dfee
SHA512: 4a05c0d179ed7c8675282f161f3e2a7b77f08882129968cb73188e8678f553b4e49ecf8fec351fcdcc15ec2af7cf9abe64b249355abca90e2d33180e7d333c53
Description: development files and documentation for libcurl (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-nss-dev
Priority: optional
Section: libdevel
Installed-Size: 1578
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-nss-dev, libcurl4-dev
Depends: libcurl3-nss (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, libnss3-dev, librtmp-dev, libssh2-1-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-openssl-dev
Filename: pool/target/c/curl/libcurl4-nss-dev_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 434892
MD5sum: 52cfd00782fc7dd270f063ada25d3f2e
SHA1: dcf979402a8277f16423e5b2bae998ef008567f5
SHA256: a4d767bb377978786919912701bf12daee770eacf9a297afd4a06e4596b9e7bd
SHA512: d6e5ccdb2efc88fe1d16f3c95f456431a65692e7917e4f7f09e8f274c63b1b9f23a1f8a8d963655e5d5531f340ea4e1ee84c263f57ccb0215a11c3836923803a
Description: development files and documentation for libcurl (NSS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by NSS.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libcurl4-openssl-dev
Priority: optional
Section: libdevel
Installed-Size: 1573
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: arm64
Source: curl
Version: 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-dev, libcurl3-openssl-dev, libcurl4-dev
Depends: libcurl4 (= 7.74.0-1.3+deb11u11+apertis1bv2022.3cb1)
Suggests: libcurl4-doc, libidn11-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, libssl-dev (>= 1.1), pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libcurl4-nss-dev, libssl-dev (<< 1.1), libssl1.0-dev
Filename: pool/target/c/curl/libcurl4-openssl-dev_7.74.0-1.3+deb11u11+apertis1bv2022.3cb1_arm64.deb
Size: 429944
MD5sum: df79889162efea477bd75e741d46d920
SHA1: 8e9101cc8c4aa0d5a13aa4a0894f32a04b696386
SHA256: 7dc3ff01f4d0c3bfc080b542a181d697f0c0259b1b650cebc40a7624a2b83cc7
SHA512: c057ce6b78b91d60f96b30f63ba911d2ffe30efc7a5d225ddd06469edd6991a1dd69fc7eaa24368055a9af8cdc572d862b11bf7a72b26128b137bc7e9ed9e28b
Description: development files and documentation for libcurl (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by OpenSSL.
Homepage: http://curl.haxx.se
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-0
Priority: optional
Section: libs
Installed-Size: 3231
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Depends: libc6 (>= 2.29), libglib2.0-0 (>= 2.44), libgstreamer-plugins-base1.0-0 (>= 1.18.0), libgstreamer1.0-0 (>= 1.18.0)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 2263948
MD5sum: a19e6d011624a23f56ef60fe2ecc478c
SHA1: 2e12c111c9c09a71590f98cd636395816db61ca5
SHA256: 7f30367d2410189f0280dc1ce31ceef9da585ec13bdf1326cf7569b79fc915fc
SHA512: 843e1351557adfcbab54074f20e4c0bcbd79ef1309965648c8c6ae2a3d3baff799b6ef6c8c4e7ee1ca16374d058a8a6f7bb47297bb4e6db35ffaecf6033abd18
Description: GStreamer libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains shared GStreamer libraries from the "bad" set. The API
 is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-0-dbgsym
Priority: optional
Section: debug
Installed-Size: 1419
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Replaces: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Breaks: gstreamer1.0-plugins-bad-dbg (<< 1.17.1-1~)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-0-dbgsym_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 1188996
MD5sum: be4b97890f9714395b4d4c3b4705f565
SHA1: a654203ecf6aac9cc132c8545d3a803c2900ce2b
SHA256: f977f1d8395b412db9e577f0988df2939ffb9c0e9395500d9ab1104ea9610557
SHA512: ed2cb290aa48cb4c8784944536d11cacacfc5d39c62ee21176b7ef38ae942a93fd8e8f35b28b566da2882605683135a7e9c7ae1864f209088fbcb33744ddc93c
Description: debug symbols for libgstreamer-plugins-bad1.0-0
Auto-Built-Package: debug-symbols
Build-Ids: 0a7593a200bd5460958930b9e8e35005ea870686 22bc2ad5d6866f5fa89d6479d6f1874863bea55e 2c8fb5a1b25e0745003fe9fd6ae8a73e217ef62a 399eabc11cb3966dde2a267af238dc7291616cfd 3bd97c55ddd9133c3f87be76b96fdd8ea6659b9a 41bdf09e906f8814911a11b2d1d4edb4338c1bbb 5bfa4c74546666fe54026894b36de20db152a285 8eebead5fb0c8c5be20e3d6577afc2b597a3e30d 8f9018cdbfc6339ce68168c4e2c501fa589c457a 932836aa9aacb5bea30499e0faa18ee58a6682d3 9aaa0280853211760de63f1416feeab9df750c6c 9deb18c122df7f8a9f3a5c56be7adc7e8998c744 ab35b9207a5877923ec4dcc8188567d75628dcb3 ae4f3418dac5d0cef8c3084d1be0bee9d8b21086 ae83f656f9a2570b5e89a80aa92c02030bd77994
Multi-Arch: same

Package: libgstreamer-plugins-bad1.0-dev
Priority: optional
Section: libdevel
Installed-Size: 3500
Maintainer: Maintainers of GStreamer packages <gst-plugins-bad1.0@packages.debian.org>
Architecture: arm64
Source: gst-plugins-bad1.0
Version: 1.18.4-3+deb11u3+apertis1bv2022.3cb1
Depends: libgstreamer-plugins-bad1.0-0 (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1), libgstreamer1.0-dev, libgstreamer-plugins-base1.0-dev, gir1.2-gst-plugins-bad-1.0 (= 1.18.4-3+deb11u3+apertis1bv2022.3cb1)
Conflicts: pitivi (<< 0.9999)
Filename: pool/target/g/gst-plugins-bad1.0/libgstreamer-plugins-bad1.0-dev_1.18.4-3+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 2075300
MD5sum: 6f2aac9e1719dcf252d54557cd84e931
SHA1: 7455795a34b04a04ae60ef73a81e9f439ba7fb8a
SHA256: ace7887f7736cdbd12905ecda03222d6807f54a98ab8bae24e82ce504f4d02e9
SHA512: 2862b2c5bce3521b302ebc71a0ae0fedb6d55339678b086deefdcb1ce38b8e577d4e77d44ab819ae7f7e4fa358ab47e0652b098e33968bd6e2ad2a6ae1d8aa02
Description: GStreamer development files for libraries from the "bad" set
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 GStreamer Bad Plug-ins is a set of plug-ins that aren't up to par compared
 to the rest. They might be close to being good quality, but they're missing
 something - be it a good code review, some documentation, a set of tests, a
 real live maintainer, or some actual wide use.
 .
 This package contains development files for GStreamer libraries from the
 "bad" set. The API is not guaranteed to be stable.
Homepage: https://gstreamer.freedesktop.org
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-18
Priority: optional
Section: libs
Installed-Size: 27211
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libatomic1 (>= 4.8), libc6 (>= 2.29), libgcc-s1 (>= 4.2), libglib2.0-0 (>= 2.47.1), libicu67 (>= 67.1-1~), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 6999372
MD5sum: 0eff1e58041c6592347a1e1fac7cea8a
SHA1: 1dfbb4cd30e075165e99a23480be649db2b0c7e9
SHA256: 136f040eb1314fdd3c93442f91a279e588e12c27635a89fea80f07668270c51a
SHA512: 918d8f149c70f04686064adc0551cbb2e02488df06bb7c0902a62020d75dff5fc073b30db293892aae99d8b10179e4a45f2b47392af9a1bfd4c5eaf6713f309d
Description: JavaScript engine library from WebKitGTK
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-18-dbgsym
Priority: optional
Section: debug
Installed-Size: 38094
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-18-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 32807128
MD5sum: 8368f7f90a9288cf1f2b7c63f8467ff6
SHA1: f92fe5d1134686051ad6fce9ebe8382d160e5f44
SHA256: 72f6b54a29085ca563051b49667aa722f997480e0bce9bb82700f2dd1e4663f6
SHA512: 0e515dad6c75e54ff1fa2df570016f0fba23de4252a047e3a7ad4f5d276510c64f2d7e33e3eebcfdcf3a5c6a757a6f0e05c2b1460c57f9d1e3bb57081de61cd1
Description: debug symbols for libjavascriptcoregtk-4.0-18
Auto-Built-Package: debug-symbols
Build-Ids: 2dc8eddc8aaa731490ca3681f573d63c948bbe36
Multi-Arch: same

Package: libjavascriptcoregtk-4.0-bin
Priority: optional
Section: interpreters
Installed-Size: 745
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libc6 (>= 2.17), libjavascriptcoregtk-4.0-18, libstdc++6 (>= 4.4.0)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 299280
MD5sum: b84726e81a3ec9cb6e8ef5cb7396e0ba
SHA1: ff653d9b78e756d346d76278dfcf75c64704e0db
SHA256: f2dd346b9846877ce6dd45b4b146584ac1222fcce4f8199b89081c18088bb4d2
SHA512: 6fed96a58532e7f326df8c5adc10bcdaa25a0414b73de298f05b1de24f19461ab56c951b75b249f0fa8e61cdbbdf36d6a836c5a558c17336e27566dc16139329
Description: JavaScript engine library from WebKitGTK - command-line interpreter
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package provides jsc, a command-line JavaScript interpreter.
Homepage: https://webkitgtk.org/

Package: libjavascriptcoregtk-4.0-bin-dbgsym
Priority: optional
Section: debug
Installed-Size: 533
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-bin (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-bin-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 450500
MD5sum: 742651b894cf0482be8b7ef84844f3a8
SHA1: 2bca54a136222defdacdc582a08d5837eb3828b1
SHA256: 87e6eed17e02b2febaadafccf96ff9888baacee6e20fa9835e82fb537a11bdb9
SHA512: b65f1c44dcf84ab62a89b84e81abe44d93cfed6ee43d75620d33c60a19dc537870d03393d76aef0f6cd25c96013a5ac1f423ba78c6054008c0816dda366dc257
Description: debug symbols for libjavascriptcoregtk-4.0-bin
Auto-Built-Package: debug-symbols
Build-Ids: ccbe9cedcedd21c1da73854067d209e7879d717d

Package: libjavascriptcoregtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 885
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gir1.2-javascriptcoregtk-4.0 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libglib2.0-dev
Filename: pool/target/w/webkit2gtk/libjavascriptcoregtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 244152
MD5sum: 96bed79ab37238767a8820f0070a60c5
SHA1: 58a017a6aed29e8ebef0d9e8009298711bea43ca
SHA256: c395ad94ce886c81ded31e29d607caaf8fdeede9b0de5a2960669ecd033a81e3
SHA512: b5fe1c0ce941e138f1b742a7ccfae98d6071b6496df146dc4a63ca4e4effa8207dbe2caca44fb2000216168914cb5ca0e8fe10e42df9785ec757b1b82fe006e3
Description: JavaScript engine library from WebKitGTK - development files
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.0).
 .
 This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libnghttp2-14
Priority: optional
Section: libs
Installed-Size: 223
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: libc6 (>= 2.17)
Filename: pool/target/n/nghttp2/libnghttp2-14_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 77348
MD5sum: b66ff6d4b3cce6b8f5923660f8514a65
SHA1: 1342e9dc91b52137429ae52aef438ac185ad77ae
SHA256: 01392256d9baa48f184f9611c6b21f62b0f82c1af367f050fd1d1f93512f9561
SHA512: fc87b00c5075c17a86bb893eba93b7d83b9b49133e252b0ca5f9cd35ad1c8448f97679218f9b8580ff812a78cbcf7d9be683adfee394b7247ff0ac467c0e415c
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/
Multi-Arch: same

Package: libnghttp2-14-dbgsym
Priority: optional
Section: debug
Installed-Size: 249
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/libnghttp2-14-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 217148
MD5sum: d9e74f763a601c241725e74b95b7449a
SHA1: 873b0e9d1e3e5fb1b4eefac2db9ac80824699ead
SHA256: 3687d9f69771fdba568d15c82dd40e3ce327f082adbf6078aaef4836600c1948
SHA512: c8bb04d86887e8b9ce630bdd98cddc2eddffcab64df5d6fbce46fc76f99ef7d445acd3505a1a7138f4da9cb53196109b42919347cea8210bf6e26c124f6830a2
Description: debug symbols for libnghttp2-14
Auto-Built-Package: debug-symbols
Build-Ids: 60504c41ea4a1085678767adcbbe7ece2c50cca4
Multi-Arch: same

Package: libnghttp2-dev
Priority: optional
Section: libdevel
Installed-Size: 537
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), pkg-config
Suggests: libnghttp2-doc
Conflicts: libnghttp2-3-dev, libnghttp2-4-dev, libnghttp2-5-dev
Filename: pool/target/n/nghttp2/libnghttp2-dev_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 114664
MD5sum: c3b1d931ce3a5568437a3d626c546326
SHA1: 91d6ff244aa09b2a66ac8627e5363354f04d40e1
SHA256: 90c6299c9401d9f0a69272dcb2b3c7f48392e645ffaed6e013b40489a450c330
SHA512: 0c730975c3a90fe404f20195191d5d6be9fa0a7c1cc60184599e86cd5530aff2c172978d635908451f270a90b6ad9387708f98799f57db62b388ee7d86c966d0
Description: library implementing HTTP/2 protocol (development files)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs development files.
Homepage: https://nghttp2.org/

Package: libnghttp2-doc
Priority: optional
Section: doc
Installed-Size: 10333
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: libjs-jquery, libjs-underscore, lynx | www-browser
Filename: pool/target/n/nghttp2/libnghttp2-doc_1.43.0-1+deb11u1+apertis0bv2022.3cb1_all.deb
Size: 2956932
MD5sum: 0379cc51ef413390020c68787b349eb1
SHA1: d4837561a87cd60e95736cfdd3747d546e5dfcd3
SHA256: 8c16b0b0cc44ffdccf720e004c4d8c46961f19115b930c19a1dc976ad736fa53
SHA512: 42c33b088f113add279763ffb9eed9a88f1e551e0a0968af379aa7d843f1996aff871bde653a3ded3abe6b314d017ab988380660e8bf94a477e97c722e01d98e
Description: library implementing HTTP/2 protocol (documentation)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs documentation.
Homepage: https://nghttp2.org/

Package: libtiff-dev
Priority: optional
Section: libdevel
Installed-Size: 1170
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1), libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1), zlib1g-dev, libdeflate-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Filename: pool/target/t/tiff/libtiff-dev_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 407408
MD5sum: 53112c34309e97eded4cf7081071d896
SHA1: b96132c3fd09189017f1cf08864a0eac1f12d401
SHA256: 8bbac9d1db3dbe5230026ea25aa0ef29c03167c1c0170641f7de89edc3a617bd
SHA512: 4167ee4ee5565247d9a5d0b949338275c902c0b9c9208582912ac281c8909a15836cb0aebf3b39d7db7a91a89a19be2c025462320bb88f6ea2aea0c204c1072e
Description: Tag Image File Format library (TIFF), development files
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiff-doc
Priority: optional
Section: doc
Installed-Size: 1324
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: all
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Filename: pool/target/t/tiff/libtiff-doc_4.2.0-1+deb11u5+apertis0bv2022.3cb1_all.deb
Size: 439276
MD5sum: 8ed83e6833f32041f0ff5b462ba0b46d
SHA1: 2faa4b19c1fd32ba7a084d3530cbce5d0b13ebaa
SHA256: a5ce464eff0af7b8e33eb28bbfc3646124ef13c6a50eb910db635fbecfb584a5
SHA512: 9ff7319be68a589c8ea79c5097dc18fe61b9be376d357971b58e04faa5f5579e7d582b39e9db89d78367e6edfe0a642c9db69bee2f2c1a813a848b8537bd1de6
Description: TIFF manipulation and conversion documentation
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 contains documentation.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-opengl
Priority: optional
Section: graphics
Installed-Size: 157
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: freeglut3 (>= 2.8.1), libc6 (>= 2.17), libgl1, libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiff-opengl_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 135648
MD5sum: 45c425155991a4e394ef4321467a53b9
SHA1: 32c8bf9b3a433fa38d9718c27a353d62a7d79aec
SHA256: 1c5a71c08a960f706a2b89d0248990ee7b0048e5bc29fa5f51bdb07d00abe3b3
SHA512: 8c76eb69ef7c2c55c8e91f5b48b7ae5dc0dc53a7f31a6c255ef67d8b3852baa0d77bf010d0ad7b98abef50f80198b290c252e31ebcc4b46c3bad63f2ea525c10
Description: TIFF manipulation and conversion tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 contains libtiff tools that depend upon opengl.  It complements the
 libtiff-tools package, which contains the libtiff tools that don't
 depend upon opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-opengl-dbgsym
Priority: optional
Section: debug
Installed-Size: 31
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff-opengl (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiff-opengl-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 15080
MD5sum: a064620f78bbf104b1628e480234bc27
SHA1: 59ce5349a1773e65bf4f78a2b86b0dc172889cef
SHA256: 3bd52470def4fe706bad693dfe72dba21304e9234d38547679046921d4d4bda6
SHA512: 503b317da672c4bb24a9a73a7ed6570487267041f33110d6742f24f75eb7d6ffe434e201fecd96908967158b090d964876adf836d8868ed4a806daa58f43a379
Description: debug symbols for libtiff-opengl
Auto-Built-Package: debug-symbols
Build-Ids: ab449ec87b1e23da3a7ec7e45d796f4c717de15d

Package: libtiff-tools
Priority: optional
Section: graphics
Installed-Size: 694
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libc6 (>= 2.17), libtiff5 (>= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Suggests: libtiff-opengl
Filename: pool/target/t/tiff/libtiff-tools_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 310264
MD5sum: 0dbeec62dab4d0d5f312d0125565d117
SHA1: 4d5940392057d02fb0d540dda4d5e8411e63aa5d
SHA256: 97bef8b40e87e4b74dd74e8a3c5b9669cd6dd319e36c56ca3acc60b0d348a724
SHA512: abc5da8a793943c89766e2f67a9b6e052a5d30c1f115cd68a5c16ef9ef0ae3d238613adee5cf67f856389024f8708df50c5daf5216d74a8df11dec806b2ab2d1
Description: TIFF manipulation and conversion tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes tools for converting TIFF images to and from other formats
 and tools for doing simple manipulations of TIFF images.  See also
 libtiff-opengl.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: foreign

Package: libtiff-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 597
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff-tools (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiff-tools-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 420264
MD5sum: ba96d52e1160f2a7a64ebb2880f618cc
SHA1: 5f65fe65a1db3a2fcee54b4ffac26699e428497c
SHA256: d48c8b1e3128e4847c9ecbc78aef59ce21227eb33f2a103b740b6a4dc214c97b
SHA512: a1647213340ece99fa5f5ae9c9bb0b317887656dcc7354c0c27a74a6adc7c0116b4a3be39f4a50a7a0e80678d9f3e16e27495ccb9a79c2ee77a77adb1dbe9c36
Description: debug symbols for libtiff-tools
Auto-Built-Package: debug-symbols
Build-Ids: 03048cb2debd0378e48f20159a081b5e2afe810b 03a937f1a549c432837280e8abbd393e2f681107 056a0b9cefd7e25207c3116eda25d4b8bef83bbc 07d5b7ae9e11eec2591be6ea2398c53d1d2ee27d 16ad92966bc88aae69a70ef07bf0ba0dc10803ab 3d0f6a1efae03144f9fe75786a79988841046e75 74c1acfc974d8eb3e3b4f062d57c5112b0fcadeb 75e4fa210176f8d2b582ec1ae2ec35db60567f38 7babaa2ba63e6bc4d3be4c7cef2528e776b3cb7a 7f3ab20a335d8532caab8bfb975b3bd56473f469 88e7767cb2c45322f4b15fd001a5662836d338b4 905e3b7ebe82b20a98c48314ab6793e564ab28de b0159f913f46859796a81edd39c56a66794accfd b6d9ef0c14ce5596638f7ee1e4aef89a4405d39f c8abf93dc4614c1340f38ec36a495834217de6f0 d128b9e5a2ad1fca7d5dc278f0509b7a91872c61 e097198ace26becc65390736ecfbedca63f52a5d fc3aafbc1c363ad5c6be05a9eca9a9b15840a62a

Package: libtiff5
Priority: optional
Section: libs
Installed-Size: 666
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libc6 (>= 2.29), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), libwebp6 (>= 0.5.1), libzstd1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/t/tiff/libtiff5_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 279796
MD5sum: fee8998e1f9928524bd9b0aa56d7ce3a
SHA1: 65ae9b864ec1828b954e48d452b792c1d4303e85
SHA256: 295eb38398d55fd798a1483b2b487f51c23c2ea1381cdd31389a5a2dd0f107d7
SHA512: 43a0f45059df066cba556a9f5476bc28ef1bf2222916ebfdee118f00ed48657a48e982a0ebeed82b8d57630dd446d0d72018d2ac343272045b0cb0ecc176ab69
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiff5-dbgsym
Priority: optional
Section: debug
Installed-Size: 483
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiff5-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 441208
MD5sum: 29d99f57d81ea5785616cecaea71ae75
SHA1: 7de5265e1e48a5bcc4864ef8f59d8a6f22f758c6
SHA256: 3c8a09d45e3c584d9cb565231d7e879cfc55c941fffb1fa4046dd89545ac7ad7
SHA512: 66c369e2bc5b8ba2a52338e4b61bf1a52a716eaf5e22ba3ce160c00a43adeebdab3f54c2d52bbd78373ff0453c175191e107d0f357bfc3f01f0d16e9e350dbc3
Description: debug symbols for libtiff5
Auto-Built-Package: debug-symbols
Build-Ids: 51866ec4d42a317ee44ba3da7d75776229c3dc2c
Multi-Arch: same

Package: libtiff5-dev
Priority: optional
Section: oldlibs
Installed-Size: 131
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiff-dev (>= 4.0.10-1)
Recommends: pkg-config
Filename: pool/target/t/tiff/libtiff5-dev_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 127508
MD5sum: 36408433a227cf389d1138ae762922a4
SHA1: 5c69c20f798a235356d5b15ea4e1520026acfc57
SHA256: 267225a2a9c33a1ac43b16f91a19506583c858f1df1808c631b178723bdf061c
SHA512: e0ac658eed24d82aed872658254a20d98166989a96ef0d151e845f7a681ab168de03b129bbfc43deab514403e32348bc8ac1d4e3524eb8fae92302d86e57a6e5
Description: Tag Image File Format library (TIFF), development files (transitional package)
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
 .
 This is a transitional package. It can safely be removed.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiffxx5
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libc6 (>= 2.17), libstdc++6 (>= 5), libtiff5 (>= 4.0.3)
Filename: pool/target/t/tiff/libtiffxx5_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 130924
MD5sum: 452e412dff8eea379bf643191b6ced2b
SHA1: e31d1d780e24248f40aee4589ad5ab5b6a219dfd
SHA256: b789837e9eb7af1ea5dfb2cf83fd89f685f11aafb9a378a16a04c5139066a2f7
SHA512: 7e69c9c4c8b3478afafdf22d89a9ac5bd8a0fa0199e8ce15773d696249929625c5007f4e42e0f370870cb570580f4063e57573a7c570887ea79b15b7504ae7b1
Description: Tag Image File Format (TIFF) library -- C++ interface
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/
Multi-Arch: same

Package: libtiffxx5-dbgsym
Priority: optional
Section: debug
Installed-Size: 36
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: arm64
Source: tiff
Version: 4.2.0-1+deb11u5+apertis0bv2022.3cb1
Depends: libtiffxx5 (= 4.2.0-1+deb11u5+apertis0bv2022.3cb1)
Filename: pool/target/t/tiff/libtiffxx5-dbgsym_4.2.0-1+deb11u5+apertis0bv2022.3cb1_arm64.deb
Size: 21692
MD5sum: 3cd04820d4b5de9516b1e4b739b160f3
SHA1: 2551da4ce8824b10ca3ac7220691c5aef348d4dd
SHA256: 900fed4c6dc9511bf75766c59a65e153285f8d19dab50a385c62a3bde7d5b167
SHA512: 118cdff4b633c909e0a17d2c86085951d37bd1c4109686e7fe33441395894847434b259c329a21bf0c75c618df562d1295c99903e51d367ed422cb42580a97e4
Description: debug symbols for libtiffxx5
Auto-Built-Package: debug-symbols
Build-Ids: 1edb52d730c0a67fb12a3f3cb90491a2ff3adc07
Multi-Arch: same

Package: libwebkit2gtk-4.0-37
Priority: optional
Section: libs
Installed-Size: 74086
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libjavascriptcoregtk-4.0-18 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gstreamer1.0-plugins-base, gstreamer1.0-plugins-good, libgles2, bubblewrap (>= 0.3.1), xdg-dbus-proxy, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.30), libcairo2 (>= 1.15.12), libepoxy0 (>= 1.3), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.8.0), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.61.2), libgstreamer-gl1.0-0 (>= 1.14.0), libgstreamer-plugins-base1.0-0 (>= 1.16.0), libgstreamer1.0-0 (>= 1.18.0), libgtk-3-0 (>= 3.23.0), libharfbuzz-icu0 (>= 0.9.9), libharfbuzz0b (>= 1.4.2), libhyphen0 (>= 2.7.1), libicu67 (>= 67.1-1~), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libopenjp2-7 (>= 2.2.0), libpango-1.0-0 (>= 1.14.0), libpng16-16 (>= 1.6.2-1), libseccomp2 (>= 0.0.0~20120605), libsecret-1-0 (>= 0.7), libsoup2.4-1 (>= 2.69.90), libsqlite3-0 (>= 3.7.15), libstdc++6 (>= 9), libsystemd0, libtasn1-6 (>= 4.14), libwayland-client0 (>= 1.9.91), libwayland-server0 (>= 1.3.92), libwebp6 (>= 0.5.1), libwebpdemux2 (>= 0.5.1), libwoff1 (>= 1.0.0), libwpe-1.0-1 (>= 1.3.0), libwpebackend-fdo-1.0-1 (>= 1.8.0), libx11-6, libxcomposite1 (>= 1:0.4.5), libxdamage1 (>= 1:1.1), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.2.2)
Recommends: gstreamer1.0-gl, libgl1-mesa-dri, xdg-desktop-portal-gtk, gstreamer1.0-libav, gstreamer1.0-plugins-bad
Suggests: gstreamer1.0-alsa
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 19256768
MD5sum: 1117239bbc3c64cd4a3c7f6af49fafba
SHA1: cf9999e68e5058a64c84bc72f305ee3e67a8d7a0
SHA256: 6963e93bd8e3c62e2489e419670c6af18c70abd934e00548954aebfae8fa81c7
SHA512: 672bd595b369ac2203001389a00b9cb26a6e810d3b597ac6af8732aa8f81c8f755dcffd50f76b09cf1528991a3156cd725e662216376c95b621203c3f5bd6403
Description: Web content engine library for GTK
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libwebkit2gtk-4.0-37-dbgsym
Priority: optional
Section: debug
Installed-Size: 132411
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-37-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 106099624
MD5sum: 42405916ed3b063f87583145ce59d1f4
SHA1: 5b25332ca205d9ffd4536175c2df89d220d4da63
SHA256: 56a226f00f352881784048372521c35dc4678e1220199d02706bd47224a4c7ad
SHA512: f3e8d2b09ab8bbdddb3ea351115c6a5219d1876cc3cd11a36569c3364b324c92ade1a3c173de09317f5f0d5548c8d109a4ed66b6f4b5810181cd4069e7304cf1
Description: debug symbols for libwebkit2gtk-4.0-37
Auto-Built-Package: debug-symbols
Build-Ids: 06a21cee5e0ae5af85979f2b4139578b61c143b7 20c66f286b8a0a4385009188adc1173b6dff5a9a 9aae4bbaeaee679be2a47a8b509e14d6f2a7dc48 ab93bf8c83df0e1e517fb94ab27b32ded8e46059 ff6b3fcf2edf59ee2048d9a5e4f2847878ddd7fc
Multi-Arch: same

Package: libwebkit2gtk-4.0-dev
Priority: optional
Section: libdevel
Installed-Size: 5588
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), gir1.2-webkit2-4.0 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libgtk-3-dev, libsoup2.4-dev, libjavascriptcoregtk-4.0-dev (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-dev_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 461516
MD5sum: ac74787dfdc21fa9a3a24e9fc11c53cb
SHA1: 9862ba35a1c7d9b796641e9ae1be2cf9142ae0ca
SHA256: 7f9e37c3a1b7fad00ffe9d4c9949a22b2cd738d96b7661f34bcfee542dd40a1b
SHA512: 500f8202484e81b939361116e1b9d1ec4f26371665ceea192fbb6b262ce53be4ebf0583b9c05d6c138cbb4d0acacbf0a36abe660bbc0ef121e21cc819d8dbbf1
Description: Web content engine library for GTK - development files
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.0 of the API and uses libsoup v2 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the development files.
Homepage: https://webkitgtk.org/
Multi-Arch: same

Package: libwebkit2gtk-4.0-doc
Priority: optional
Section: doc
Installed-Size: 35746
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: all
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Suggests: devhelp
Filename: pool/target/w/webkit2gtk/libwebkit2gtk-4.0-doc_2.42.4-1~deb11u1+apertis1bv2022.3cb1_all.deb
Size: 1069816
MD5sum: db6d2c6e5e7239efb92fa60db1a8914b
SHA1: e6f2f71dd1134ac81862ce49a2f37c0833097c55
SHA256: 423c269eb6792ff2e45d82f645e006ecc8eb423a85b812ccba4e97890b9040d1
SHA512: d6e2ae7353eba68e3614d575eba9d918d876e19ce2e17f97206d676118fbbd4ffa1e0d47ec96b3e179c332232c783c140dd54461aef406cb159bda8ede477f9a
Description: Web content engine library for GTK - documentation
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package contains the documentation and is valid for versions 4.0,
 4.1 and 6.0 of the API.
Homepage: https://webkitgtk.org/
Multi-Arch: foreign

Package: nghttp2
Priority: optional
Section: httpd
Installed-Size: 34
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: all
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-client (>= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), nghttp2-proxy (>= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), nghttp2-server (>= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2_1.43.0-1+deb11u1+apertis0bv2022.3cb1_all.deb
Size: 17284
MD5sum: 91180e1705656122546017bebde4ecfe
SHA1: ffb5eaf756a0ee2fecef147cf8b7d13963a3a400
SHA256: 13ed163f2446ec4858405ccdc00980b04d2752ff57d42366b412eca7a79ea841
SHA512: 763768f64f0e74fee6d380d4475f5020937474937b7d08e338efbf01df38830daad2ae3b147c81a35e88c05b5cd78aaad6afa38f346cad5962ee9c327b5aabf9
Description: server, proxy and client implementing HTTP/2
 This package will install a set of programs implementing the HTTP/2
 protocol: a standalone server (nghttp2-server), a reverse proxy
 (nghttp2-proxy) and a client (nghttp2-client). It provides no files
 on its own and is not necessary for these programs to work.
Homepage: https://nghttp2.org/

Package: nghttp2-client
Priority: optional
Section: httpd
Installed-Size: 521
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), lsb-base, libc6 (>= 2.17), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjansson4 (>= 2.0.1), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 7), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-client_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 156036
MD5sum: 080dc6cd89d2c0ef9bbec7a82b509a0f
SHA1: d78114f62d0447338f1e99b107d035de2bf920f3
SHA256: 4db87a1a00a828fc92eb602317ab562a31308ae66e92a4463ad338cfda542a22
SHA512: dfbbc81229a933f87682ee5410a04087f36a95dc578528b57f55611c545d3ec6852083fc19414991bf693f1c389ceece9ac1cbd2c9330994464bde32b268d202
Description: client implementing HTTP/2 protocol
 This is a command line client implementing the HTTP/2 protocol. It
 gives access to many low-level and advanced aspects of the protocol
 and therefore is useful for debugging.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 1967
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-client (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2-client-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 1862720
MD5sum: 66061570203b8002919d7c3725467079
SHA1: 351f63c320a63217b8109a7044c65fe2cad09247
SHA256: aa07da8c68a005d33cd1d6a44fbc24ed41fb85289edb9d4b602c592a297f7fb9
SHA512: a8c7db28b2b6786b2ed0e926a8df92ec8713425add118a7ea68b358bb695218e39c6a7f84eed1ecf6812321fe6132ccb4ce98f270d1193a19e0729cfcbb8c73c
Description: debug symbols for nghttp2-client
Auto-Built-Package: debug-symbols
Build-Ids: 56dea183a5371968dae208cf699b9b8b4f2fa51b 9e6726176c510069777cf7319c0ff0ad1aeb7372

Package: nghttp2-proxy
Priority: optional
Section: httpd
Installed-Size: 1024
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), lsb-base, openssl, python3, libc-ares2 (>= 1.7.0), libc6 (>= 2.17), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.1), libstdc++6 (>= 7), libsystemd0, zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-proxy_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 350884
MD5sum: 8a964544939e88e32f3034f842288f12
SHA1: 4d9fd5eea56557d1c8b01c98336eec205df9b4ed
SHA256: e40e6592a90981d1523d89d7de1c9e1732ebcc8a7d3501ef29b26dee4d45b4f6
SHA512: 9c642ed4af2272c240bf223dca5d711e30ce4412946757b675062423454619abb82c706bbf1f3434e4af0874fb23ab1845e9c6de765543f881ec4b6364bdde08
Description: reverse proxy implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 as a frontend in front of web servers that do not support HTTP/2.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-proxy-dbgsym
Priority: optional
Section: debug
Installed-Size: 5293
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-proxy (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2-proxy-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 5168976
MD5sum: cf4a1c556f13cc263fc7f1cd46b8944e
SHA1: de79cfe722265d74b53a8ba0f3e3642e2ed07462
SHA256: 0b1d46f929c4facf7cfce9da0e17fc5abc8cd4a552c6b76f71ed0ee43f98a94d
SHA512: 0222bb000aa383c101c39d563b8973d5b1d87af1f3deb24e954fe8c1d6ba7cfd818a545de79eca5340db3f4c220835edfc9c26b884d67c6ed04db3deeca6bb14
Description: debug symbols for nghttp2-proxy
Auto-Built-Package: debug-symbols
Build-Ids: afd4bd704290d4f868d3abe4f7fae5a336cf1164

Package: nghttp2-server
Priority: optional
Section: httpd
Installed-Size: 249
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Replaces: nghttp2 (<< 1.3.4-2~)
Depends: libnghttp2-14 (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1), lsb-base, libc6 (>= 2.17), libev4 (>= 1:4.04), libgcc-s1 (>= 3.0), libjemalloc2 (>= 5.0.0), libssl1.1 (>= 1.1.0), libstdc++6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: nghttp2 (<< 1.3.4-2~)
Filename: pool/target/n/nghttp2/nghttp2-server_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 95424
MD5sum: 6b4ec4c6be4e78823e2b2a0d4eb04320
SHA1: e5cb16bec0128f29fc78bab6fd5714d38a386175
SHA256: b52a2bcbba0b5a83c1582ed2022af1445571364109ec1f52ca0bf42eb45f9a00
SHA512: bf92e6384289b4f15140322112bd9d6c31c7067a174db251bccb3996f572a52fbb487a865839bfc36279705f5406af8c577f4a27b47f04eef7e364991d5ba3d9
Description: server implementing HTTP/2 protocol
 This is a standalone server implementing the HTTP/2 protocol with
 HTTP/1.1 fallback for clients that do not support it. It can be used
 to serve files from a local directory.
Homepage: https://nghttp2.org/
Multi-Arch: foreign

Package: nghttp2-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 975
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: arm64
Source: nghttp2
Version: 1.43.0-1+deb11u1+apertis0bv2022.3cb1
Depends: nghttp2-server (= 1.43.0-1+deb11u1+apertis0bv2022.3cb1)
Filename: pool/target/n/nghttp2/nghttp2-server-dbgsym_1.43.0-1+deb11u1+apertis0bv2022.3cb1_arm64.deb
Size: 933044
MD5sum: 3490d4f8a237807bd4914dcf69a21b89
SHA1: dd1742ed7e64283934946692510caba693d9a1c8
SHA256: 980c31f33361f8dd54c7caec6ed907bb17a19e0646a1dad1d5ef98fdbc86517f
SHA512: 6333497dbe7f6f8d65504d61ed704a04cc0eaba05fe03dbb27d25c90a9ab6249c5f3284907e73e3c78d273d728e1108cf9ad6abd231cc6caf1aaed15d5b78f62
Description: debug symbols for nghttp2-server
Auto-Built-Package: debug-symbols
Build-Ids: b9e84323dcf4cfcd039a86d3350c596861e2d104

Package: openssh-client
Priority: standard
Section: net
Installed-Size: 4292
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.26), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Breaks: openssh-sk-helper
Filename: pool/target/o/openssh/openssh-client_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 899092
MD5sum: 2f554df8f0148e136d328809ebe41e4a
SHA1: c058ee6d42a49610a57ec4c2ad62da5eac2038b2
SHA256: 35a4c95f5f51ba23aad99845922b1214a882478ea35f5662f807711943850460
SHA512: f333697e64ba3e1721d7111fe65af467d32c4ea85a45a496073db08d16b4b2293acf4b2ed3b3d1648f7ea67e9d21cf7bc2c6ea85e2094a4050ab1040e52d54b9
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-client-dbgsym
Priority: optional
Section: debug
Installed-Size: 4340
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-client-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 3919848
MD5sum: 3416d481a4fcba0a19d347c6ef84f1ea
SHA1: ad99dadde0ed57d142dde73e9397af401f3aec28
SHA256: e44b196d439361557dba370254e3c059b83b1204ca14c914a191f8aeaca66383
SHA512: c2a6bffd67d14e9f5ff98f02bd4a19ae4f29e9b3f6a39e3c19768e5839a33a7229d90295b240edac50f6ef3f9afe1a6ac0bf60421983d973d4d248875c595a4a
Description: debug symbols for openssh-client
Auto-Built-Package: debug-symbols
Build-Ids: 0794d391ebd26cc17a51e3108e7f04d0adb61362 1ff80299b856672d0db7fc643316840f48c47efa 22b89985a224118233fd64bd84d3a5a84facf3f7 58f7c736f67cf731392dcbcf82b4f7cf6a168635 660c84d7426a83937c4c76992dbf1aea4dd5bacd 750463381e15ec082c6fea825dfa6f347d388753 783845dc2e283b6be14395b6751833963a9af47b 8b9d5d6c1db4902a9f829c5b87630d6c45200ed9 a96180fa92326bbeb046596c28a379092012d825 bef4443cb6eee75f1981b1b8d96d5953a4d360df

Package: openssh-server
Priority: optional
Section: net
Installed-Size: 1549
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.26), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.1), libsystemd0, zlib1g (>= 1:1.1.4)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Filename: pool/target/o/openssh/openssh-server_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 362660
MD5sum: 18fd0e00fc5191962cb318a5ad084e10
SHA1: 3972a55918eb28f7f0a6af4dccc3a73476643fca
SHA256: d61b71a716b548413ee3b5b1581cd82f1c76a0683d9212ade940ec86f2c35884
SHA512: 545baf06cb3aedfea61c0fa385f8103e81a292ded181c06e1adda43a7b233eccd881e52cc303a6b2e7d303cac4ceed80866ba7dccd707bcc2f37dc16aa185ac1
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 1132
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 1044976
MD5sum: c503cd3219b60a3b4dd1e4131beb8169
SHA1: f1b981157d5026596d357a36c097eac3767da26f
SHA256: 3fa999113346e454db95a21a88883fac49c840ef7c7f0bb64b7c344260870fa8
SHA512: 0fb812f7204ebd1dc583332a880cf530a0a1510d3c2b55310f6ea191492b70d449068a52d44eb7f949762c424bde6fc3cb725d5814589317bd81d42d2562d0fb
Description: debug symbols for openssh-server
Auto-Built-Package: debug-symbols
Build-Ids: a0fac971a48fdc3cb88ede43bf9b65ed12ce942a

Package: openssh-sftp-server
Priority: optional
Section: net
Installed-Size: 153
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), libc6 (>= 2.26), libssl1.1 (>= 1.1.0)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Filename: pool/target/o/openssh/openssh-sftp-server_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 50488
MD5sum: 2f831bf7ac14b1151c1737cace3bb9a5
SHA1: bc4728167e117856c3c65a53e916ac68b32519b4
SHA256: cd19e7e985902e97ae7d4fa00f9a4bbdb7f5a3960f6e9e2226e00300d6ab18ae
SHA512: 3c9673275950496b949e50384b3a5960fac52b388ede7159adb27107f3dbcc29d947bbc118fc7a6e1514d65a4d6b9fe479b29d19abe3cbd0fab9e6f76b8170b8
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Enhances: openssh-server, ssh-server
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-sftp-server-dbgsym
Priority: optional
Section: debug
Installed-Size: 193
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-sftp-server-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 164084
MD5sum: 005a21cb03c9db5dc81080268b5e0261
SHA1: 9f2880da22e71cb4b4e1f91d28ccb3cbe20eec8b
SHA256: 158596b99f3012955d1522e3bc1d1ca4d48a533d4ca7f00a3a0aaa3b47ade872
SHA512: 04f845970ac7d95cb1acde2245c30db298f1eb09535984fa4c347d50e55aba7f338b881a803d8f4283f8ee7de81befdaeda31ebbba43c46717c4534a1b6054cf
Description: debug symbols for openssh-sftp-server
Auto-Built-Package: debug-symbols
Build-Ids: 0001da05a23a68ce2bf51940c3daa8d9943caf10

Package: openssh-tests
Priority: optional
Section: net
Installed-Size: 5355
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-client (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-sftp-server (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssl, putty-tools (>= 0.67-2), python3-twisted, libc6 (>= 2.26), libselinux1 (>= 3.1~), libssl1.1 (>= 1.1.0), zlib1g (>= 1:1.1.4)
Filename: pool/target/o/openssh/openssh-tests_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 937136
MD5sum: d6a324a6e343ad6b99a09db316d2a670
SHA1: 8893f47a42aa354e21c2b9c168e8caa3f8ab51f2
SHA256: 1b780c712f30c28dc38021e9766c715fff2446e769f40004d12df265869b562d
SHA512: 796976b04e1ace5d9d945061da0cc587cbabf9e35b69cfd60d7957250a3b8772805ec1ce1b439e0b799940d6749213164f3db504cb09efc2097f582cdbcbb63e
Description: OpenSSH regression tests
 This package provides OpenSSH's regression test suite.  It is mainly
 intended for use with the autopkgtest system, though can also be run
 directly using /usr/lib/openssh/regress/run-tests.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: openssh-tests-dbgsym
Priority: optional
Section: debug
Installed-Size: 3092
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-tests (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/openssh-tests-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 2687068
MD5sum: b149fdcafde6cb56b6e76d5c74bbce32
SHA1: 10bd203e811032c3736fe32e20e445b43dec16e9
SHA256: b6d0da21aa96ae035de81d74bc4921ba630c481df8832b0b91cfe79eaf41e08c
SHA512: a4d051bf4c6b9447a8027834223c3a257565ea7b1e6b749e843ad74c7a5ff8484d66bac463a7662b953bbd215648549de5dd0e896177b4e832c6ca837d563197
Description: debug symbols for openssh-tests
Auto-Built-Package: debug-symbols
Build-Ids: 0329521e44e4907fa5bd12d1dad0e99ccbc3a6f7 08632c0e70af98e7f2a1256e18c7837db9b7e44f 21fb84772f092a3323e015ed09e9cf4fe5c2e398 25fe2c26a060da7dde49ac46a7f1d4829a95c349 3900aa620b25d21960ea8a999acd98dab698436e 7d9a565b1129f866f565a33248a568254cf25e8d 8a45d00d575220794e7fa0e502495e434dce5b82 8e9a3bd9c79392bad507449d593c2655fbfdbeca b0eca3c5e6b19b9502ae00c8ba2acd3858455444 b3798e2b6276e25884f75fa156536d65efa34ec5 b9933748f77221952017d557c09f7496ee35898d c95d9d52b3ddacf49365c1a7037b35da9bda979c cc2d9296818b872f571315c943271faa4757fbc0 d362acc0f001de2850c2bf4248b781aab784e67b dd63bdc0e087ade40b0d0e2eef114b6dadd363b8 ecb265bfaaf54d9606fb6735ad0c0f753dddfff2

Package: ssh
Priority: optional
Section: net
Installed-Size: 270
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: all
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: openssh-client (>= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1), openssh-server (>= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Pre-Depends: dpkg (>= 1.17.5)
Filename: pool/target/o/openssh/ssh_8.4p1-5+deb11u3+apertis1bv2022.3cb1_all.deb
Size: 259452
MD5sum: 22ea8f0f95966ee946050ac82f56b8d8
SHA1: 8809c26a993e7db8ac4f2f9f2b22a94cfd7e68a5
SHA256: d2e0dd81b472306b129f73973ddce09f4d0a830f3d419f4c6a71e873e7a69eee
SHA512: 58309a44ac4a8d179a04317e2f3ee0431c4e84b90f8c724fc7994e076568be2143194f527fd6ed72718bbb146d420b01ca1ae7b841a42e5e5ce4d7f99d42fc95
Description: secure shell client and server (metapackage)
 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: ssh-askpass-gnome
Priority: optional
Section: gnome
Installed-Size: 299
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Replaces: ssh (<< 1:3.5p1-3)
Provides: ssh-askpass
Depends: openssh-client | ssh (>= 1:1.2pre7-4), libc6 (>= 2.17), libglib2.0-0 (>= 2.12.0), libgtk-3-0 (>= 3.0.0), libx11-6
Filename: pool/target/o/openssh/ssh-askpass-gnome_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 272632
MD5sum: 05459fe4c8fd9ae5e334f64e401d8c81
SHA1: 2ca35b29afa68854bf12230f893ea56cb9749a22
SHA256: 5e1fa1d35be596676ee0d1c2f546e78f4c7a744f952b698afca7067944566094
SHA512: 3e3d216668b3736b6d4aca268e070cd986fca06434fdaf03a0bf1f3abf67fd2ca9f571682df8aec31c3154ab663647255eed5d65fab175c7a7594caa3da3debc
Description: interactive X program to prompt users for a passphrase for ssh-add
 This has been split out of the main openssh-client package so that
 openssh-client does not need to depend on GTK+.
 .
 You probably want the ssh-askpass package instead, but this is
 provided to add to your choice and/or confusion.
Homepage: http://www.openssh.com/
Multi-Arch: foreign

Package: ssh-askpass-gnome-dbgsym
Priority: optional
Section: debug
Installed-Size: 29
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: arm64
Source: openssh
Version: 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1
Depends: ssh-askpass-gnome (= 1:8.4p1-5+deb11u3+apertis1bv2022.3cb1)
Filename: pool/target/o/openssh/ssh-askpass-gnome-dbgsym_8.4p1-5+deb11u3+apertis1bv2022.3cb1_arm64.deb
Size: 13008
MD5sum: 3d1a921c037dea55946f83d7b00a929a
SHA1: b6726e0f68a77ca3f4ba7dedfa0360fca4cd0226
SHA256: 5479e016bf71d6d680ba8e3fa8c5d75614876ebd784acb97bfad9b8e633a6b5c
SHA512: cac2ac9f9afaedfc4ae4bcfd36703b705eba8c113edd42de39a84cad2dfac43f716d053afa1df95543c00df128878535693c8c6d3b61176d0935c16d5d9abccc
Description: debug symbols for ssh-askpass-gnome
Auto-Built-Package: debug-symbols
Build-Ids: 8b15dea5c8615dd18cb7ec9767a636f6643cc6c9

Package: webkit2gtk-driver
Priority: optional
Section: web
Installed-Size: 2187
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: libwebkit2gtk-4.0-37 (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1), libatomic1 (>= 4.8), libc6 (>= 2.29), libgcc-s1 (>= 4.2), libglib2.0-0 (>= 2.39.90), libicu67 (>= 67.1-1~), libsoup2.4-1 (>= 2.47.4), libstdc++6 (>= 9.1), libsystemd0
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 744228
MD5sum: 47b393fb4a90e71173a95087ca308a00
SHA1: 13e5d61c271804aa3a80fa9806575a3535bd1b57
SHA256: 4e989004527dde57017a3af56801e12df67f1407c61eb387648a07655b0700b4
SHA512: e251d70ac0184cf2430d1bbca7568203e397c279731e79d0461a17f9de9c9de3350a84cab2df45961e7ca3a032e9771328d07ba300fca86d04f7561ec581a682
Description: WebKitGTK WebDriver support
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package provides the WebDriver service implementation for
 WebKitGTK.
Homepage: https://webkitgtk.org/

Package: webkit2gtk-driver-dbgsym
Priority: optional
Section: debug
Installed-Size: 2378
Maintainer: Debian WebKit Maintainers <pkg-webkit-maintainers@lists.alioth.debian.org>
Architecture: arm64
Source: webkit2gtk
Version: 2.42.4-1~deb11u1+apertis1bv2022.3cb1
Depends: webkit2gtk-driver (= 2.42.4-1~deb11u1+apertis1bv2022.3cb1)
Filename: pool/target/w/webkit2gtk/webkit2gtk-driver-dbgsym_2.42.4-1~deb11u1+apertis1bv2022.3cb1_arm64.deb
Size: 1904964
MD5sum: 7dc5863fa715d2c1f16496c9b797f942
SHA1: 2ac32824cbe2c67fbe5f5b00af2b8fa8a85857fc
SHA256: 4ce6ab655500125252808f108d6bb0922a5b6f6eb86965d0a59ac2549d4d4df7
SHA512: 0ebda68cb1ff36e7c41beb62f3b59e69cc6367c20e177edde822ea3118657c926f4e9257799548157380daf6803b8f457d3c71280a4d8ab2ee7aa9d7895c6d41
Description: debug symbols for webkit2gtk-driver
Auto-Built-Package: debug-symbols
Build-Ids: 5b540877af710ee3582fd452773469db37be4bc9

Package: xdmx
Priority: optional
Section: x11
Installed-Size: 4117
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfixes3, libxfont2 (>= 1:2.0.1), libxi6, libxmuu1, libxrender1
Filename: pool/target/x/xorg-server/xdmx_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2950100
MD5sum: d9de9fc8e1267a9e605eb35ebdac4c0f
SHA1: 4e8a4ff2c5ff7f75206746d9242885141a8c628a
SHA256: 5d6bedf68670be944c1fcb1a78693b5b1968e0d85a5de942dfc6fc98cf3bdf06
SHA512: 2a26087f75aace01a809ccf5b936b27a2a7b6dece3759c5bc26cbd1c3fa021092fe4e3960409ea9edbe58a90303085ea43c1de55c1dc256bcad2cc64ff91408d
Description: distributed multihead X server
 Xdmx is a proxy X server that uses one or more other X servers as its
 display device(s). It provides multi-head X functionality for displays that
 might be located on different machines. Xdmx functions as a front-end X server
 that acts as a proxy to a set of back-end X servers. All of the visible
 rendering is passed to the back-end X servers. Clients connect to the Xdmx
 front-end, and everything appears as it would in a regular multi-head
 configuration. If Xinerama is enabled (e.g., with +xinerama on the command
 line), the clients see a single large screen.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xdmx-dbgsym
Priority: optional
Section: debug
Installed-Size: 3078
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xdmx (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xdmx-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2919272
MD5sum: 839d6b40ba0d0cd535d183593fe28bc1
SHA1: f60edd0c4d78f9863e1a9313aaafda6660099689
SHA256: 98372e59528c5f56ea0c4fed8b078709f2e2b52c9ce1be0c8c55a08f48960e61
SHA512: 8c2b3d2da7255ed07585bb20789a4703a8041b6846b4a501546dc58d2e958a56fd738e794637c41fe81a130ffdc706475d8c888f80e19d8a374a09e79c71e947
Description: debug symbols for xdmx
Auto-Built-Package: debug-symbols
Build-Ids: ab4f339f78038c88700c9cbe5b4864f124b06779

Package: xdmx-tools
Priority: optional
Section: x11
Installed-Size: 2558
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xdmx, libc6 (>= 2.17), libdmx1 (>= 1:1.1.4), libx11-6, libxaw7, libxt6
Filename: pool/target/x/xorg-server/xdmx-tools_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2325388
MD5sum: e14b6a6ffc4b54847a8bfe3324d5e995
SHA1: 93571611b49d611dfc2a99f391a3868b039bc675
SHA256: 9e0a266e6dfdab53d75e02cc0c5ea07afe318d33920d1838ef59f2af14938b32
SHA512: 223d0e648879152ef2a51ed0f5d9595e01abca50548d52e2847b82bfc9a0723a80fa93ecf82e88e65361ce852b2235d3709711b732d1ce43add337cdd27c9fc8
Description: Distributed Multihead X tools
 This package provides a collection of tools used for administration of
 the Xdmx server; see the xdmx package for more information.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xdmx-tools-dbgsym
Priority: optional
Section: debug
Installed-Size: 313
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xdmx-tools (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xdmx-tools-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 199604
MD5sum: 303f7f37c13f401e9daff80230d08a21
SHA1: d18877b14a8c3e467bc0d7d57f47ebef16d5f29e
SHA256: 59191f51608aa82f1ef71db3bb8eeb01227a2b5659d0549574cb61145a6d92f1
SHA512: ecc791f2202960b156e21ea70df059cd256666c9a529c08589cb1b8c4203b365bd2dc3962212236f20222a398daf1a5b4107feeec876d16d381a4dede8b82355
Description: debug symbols for xdmx-tools
Auto-Built-Package: debug-symbols
Build-Ids: 0278acc0b80d95836ce94b82f565407942200553 0511230f37401089ce31cc3955c9eceac7ed856a 1123e1378f173d23bc49fadc74440486442413ed 7a19e2a7800e0d382b05c0b036577aaa39740d12 8c2128db318985183e2477553acf07ed3f2155de 9540dc5b2d4b872f3242ccc926557a2760d4992f 9a11c95f9773e1bd9cdc5f8e3418777485e6a065 af6f9c988e465ae6fd04f67eaf8eaa808bd4bd0a ba113b49de60dcb4386f2438605c224a48bb8b55 c6db01493ca78f1282d58969b300fd2afe7e9931 f6e015eff65119c502b447369372239fd9c4f22d

Package: xnest
Priority: optional
Section: x11
Installed-Size: 3950
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.13.2), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libx11-6, libxau6 (>= 1:1.0.9), libxdmcp6, libxext6, libxfont2 (>= 1:2.0.1)
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xnest_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2882576
MD5sum: b789082fd38ba6926ee33b8ca488ccc0
SHA1: 7a080988c383ce694b118f0dbddc6645255bd199
SHA256: 4aa8919694bc02a4f0027f1339b90a2fb73d50c0ff883af64bd12b93ee03f40a
SHA512: a86c3f3f1f3bfe13a2e4508021a25c2d43c8f17f15407addb7ffb6df75b8b0a75a2fa0db81416c1a5a58a3a1a0391a8708e10a60fc815de740758c4474637458
Description: Nested X server
 Xnest is a nested X server that simply relays all its requests to another
 X server, where it runs as a client.  This means that it appears as another
 window in your current X session.  Xnest relies upon its parent X server
 for font services.
 .
 Use of the Xephyr X server instead of Xnest is recommended.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xnest-dbgsym
Priority: optional
Section: debug
Installed-Size: 2784
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xnest (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xnest-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2630696
MD5sum: eec1e23bad2703baf03c7bfcaed5c9fc
SHA1: fb520651248a2b487f7d8b604cd9e6bec628fe8f
SHA256: b19be46ca356ce1e4be1a7a34dbeff992226d524989da2654d758b882c247073
SHA512: f9f57d6a3cc0d38a58fd40a652a92c4687286f1f4c0aa5b7128d1cb504cfb246b54b605bbe5b5d1f6504bc713ba76106be480266fa4507c3ef634da44e136789
Description: debug symbols for xnest
Auto-Built-Package: debug-symbols
Build-Ids: 1a72a34133a8abd5d3532eeb2b59e70b6aa6cd83

Package: xorg-server-source
Priority: optional
Section: x11
Installed-Size: 7411
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Filename: pool/target/x/xorg-server/xorg-server-source_1.20.11-1+deb11u10+apertis1bv2022.3cb1_all.deb
Size: 7496948
MD5sum: ed1119fc034724fd5dc3e7f835ea389b
SHA1: a60f403587caebff0e23427203b9d5618930da5b
SHA256: 6c6af1a3b37b707d25c36b92a72171d62e9959cc9dfafbfd482e28e67ee711d9
SHA512: a58c20a34ce79de1e20be2278c680ebe3bed5cf6ba1536f66678920b2fc39d3208ce361c661519cc82e12231febda6ef47ebb43a4b647fa50343383d700f8665
Description: Xorg X server - source files
 This package provides original Debian (with Debian patches already
 applied, and autotools files updated) sources for the X.Org ('Xorg')
 X server shipped in a tarball.  This enables other projects re-using
 X server codebase (e.g. VNC servers) to (re-)use officially
 Debian-supported version of the X xserver for their builds.
 .
 Unless you are building a software product using X server sources,
 you probably want xserver-xorg and/or xserver-xorg-core instead.
Homepage: https://www.x.org/

Package: xserver-common
Priority: optional
Section: x11
Installed-Size: 2359
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Replaces: xserver-xorg-core (<< 2:1.5.2)
Depends: x11-common, xkb-data, x11-xkb-utils
Recommends: xfonts-base, xauth
Filename: pool/target/x/xorg-server/xserver-common_1.20.11-1+deb11u10+apertis1bv2022.3cb1_all.deb
Size: 2296168
MD5sum: 90901975f5cbd2c649d1e072f901d32b
SHA1: f879b4a04a74db9e881b682fb5b9e3b62e71b745
SHA256: 3d888acce65d34662d7f2fcd84411d0b48d367189dbbeaec45e65c72dfb7336b
SHA512: 2b3fe5d6357e57e6924d05f11361377c817836e6f37958d3294944de57b653bf20b381bad243469402935aa54676b41a308ed7d44d64fadd513355cda703e98e
Description: common files used by various X servers
 This package provides files necessary for all X.Org based X servers.
Homepage: https://www.x.org/
Multi-Arch: foreign

Package: xserver-xephyr
Priority: optional
Section: x11
Installed-Size: 4451
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libepoxy0 (>= 1.0), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libx11-6, libx11-xcb1 (>= 2:1.7.2), libxau6 (>= 1:1.0.9), libxcb-icccm4 (>= 0.4.1), libxcb-image0 (>= 0.2.1), libxcb-keysyms1 (>= 0.4.0), libxcb-randr0 (>= 1.1), libxcb-render-util0, libxcb-render0, libxcb-shape0, libxcb-shm0 (>= 1.10), libxcb-util1 (>= 0.4.0), libxcb-xkb1, libxcb-xv0 (>= 1.2), libxcb1 (>= 1.8), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.1~rc1)
Filename: pool/target/x/xorg-server/xserver-xephyr_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 3063460
MD5sum: e0ed652476d3dcac97f642dd1bd027a5
SHA1: 4455e8cb584db9548bc9155cb6f065ea823d1a7f
SHA256: f10a2c72897d8f7087cbb0911c00186f35cce7663b982038f786996ad8d468bb
SHA512: 7e830b314f5b12355dba96f68062f635b4956726c1f3e6970bfdd0bb1770295b6bf6d91bd383be54714db96c099780324d56936080e7c01207b6ece64485fbf1
Description: nested X server
 Xephyr is an X server that can be run inside another X server,
 much like Xnest. It is based on the kdrive X server, and as a
 result it supports newer extensions than Xnest, including render and
 composite.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xephyr-dbgsym
Priority: optional
Section: debug
Installed-Size: 3675
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xserver-xephyr (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xserver-xephyr-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 3487184
MD5sum: 3d6a07c629c3fac5bbd554fa6ac90a49
SHA1: 510db3af90a5601c129869cb2ea327e2272f948a
SHA256: db3f7700586c84348aca961851c673ecf9d0af3435cb36607987da4a29af7130
SHA512: 08f61f1ad67b6bb101e26479107c6cf5de008de387c1df8d0c357fe7d7268d999603f7e47094b954049a286efb1cf36a3cf40c0283959ed36e3c8c6b56fd3c69
Description: debug symbols for xserver-xephyr
Auto-Built-Package: debug-symbols
Build-Ids: 949e815f8a40e8db6864dc0579c49b59fe889c75

Package: xserver-xorg-core
Priority: optional
Section: x11
Installed-Size: 5737
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Replaces: xserver-xorg (<< 1:7.7+10~), xserver-xorg-video-modesetting
Provides: xorg-input-abi-24, xorg-video-abi-24, xserver-xorg-video-modesetting
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), keyboard-configuration, udev (>= 149), libegl1, libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libdbus-1-3 (>= 1.9.14), libdrm2 (>= 2.4.66), libepoxy0 (>= 1.5.4), libgbm1 (>= 17.1.0~rc2), libgcrypt20 (>= 1.8.0), libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libudev1 (>= 183), libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Recommends: libgl1-mesa-dri (>= 7.10.2-4), default-logind | logind
Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable
Conflicts: xserver-xorg-input-evtouch, xserver-xorg-video-modesetting
Breaks: libgl1-mesa-dri (<< 18.0.5), systemd (<< 226-4~), xserver-xorg (<< 1:7.7+10~)
Filename: pool/target/x/xorg-server/xserver-xorg-core_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 3445468
MD5sum: 9d2fd966803e06b7bb3370da87e911f3
SHA1: cfdb7a8ced23885b8f6b6aaafdefb502625684a6
SHA256: 18927d74f742e9068fe3ab805c636689ebe9c2151bf691be594b43c7b49c8145
SHA512: 153eebbb71cffb5d7a3af9f899dc517c3b28df38aea05a0f04617934d73857c96756b4d8ec99dbd2408d4d219554db3947763130522173e597b8a26c57c3f6e7
Description: Xorg X server - core server
 The Xorg X server is an X server for several architectures and operating
 systems, which is derived from the XFree86 4.x series of X servers.
 .
 The Xorg server supports most modern graphics hardware from most vendors,
 and supersedes all XFree86 X servers.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xorg-core-dbgsym
Priority: optional
Section: debug
Installed-Size: 5555
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xserver-xorg-core (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-core-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 5178112
MD5sum: 34465502e5865021f59807f9826c0831
SHA1: 966112a06629f0fcc266f296cb20557ec083bb2a
SHA256: 429e8d2d8082a115a94ffbc3bee38b864517fd80f3221c89b3afd2b93b624b49
SHA512: a45d84e2f0114e933661f5b94761a690331c6f094ee8265fadf98198042831c89fffacd4ffedbef6ec1d809ef94cd18f906ef8b22a6493ef868950d16bc5754c
Description: debug symbols for xserver-xorg-core
Auto-Built-Package: debug-symbols
Build-Ids: 00ef213bb794470b324a05d1ca0d985c7f9b9d26 0ae7b2ad74471a0b13d19c83f507c4c7e4b3ea31 14c3fe4c3f9b54da05d87183b162f961b6eac799 2c3dc391981083ed6b31b892f4f8513f91d18b90 363288427c53dd380e207ef35203618e6d34d2d6 3c8a058c32c5a61cf9281a6404b88a79a5fbb221 416596f7924ea30c65a4f4517a3599b76048ff02 9a7fcf9fbfc250de727e22aad6bd3fe8540318a6 c0cd6f91008b7f8868a783fcd52b6af4511556b1 c9603e6e0b34d682a8f8ba9065a99c3931cae407 d4bca843e840411f27238aad7ca045df344eaa80 e269a62110e08329124e50654292c4cdc93700f6 e8389ff20583fc3bc377a1e2385ba21f16e0133e fbd0427841a55f621f6ea97f514b856da390772d

Package: xserver-xorg-dev
Priority: optional
Section: x11
Installed-Size: 3556
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: libpixman-1-dev (>= 0.27.2), x11proto-dev (>= 2018.4), libxfont-dev, libxkbfile-dev, libpciaccess-dev, mesa-common-dev
Filename: pool/target/x/xorg-server/xserver-xorg-dev_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2469696
MD5sum: d9e7f4a43200d9b96bd3a007cc572969
SHA1: 88a8747aa8bec45e22c22b62b67fb98039c2c428
SHA256: ae86004fc3d5541302f858dff841d1f3ce9a6098eba7a0f94604f472e478e52c
SHA512: 01c0e18fb1667c0283b2acb774f70886b2171decc0e9d689db99f068ed15d9e81b0421a701d156a5547c305182b02324433df1e425810e969f3bd2d9b864acbe
Description: Xorg X server - development files
 This package provides development files for the X.Org ('Xorg') X server.
 This is not quite the same as the DDK (Driver Development Kit) from the
 XFree86 4.x and X.Org 6.7, 6.8 and 6.9 series of servers; it provides
 headers and a pkg-config file for drivers using autotools to build
 against.
 .
 Unless you are developing or building a driver, you probably want
 xserver-xorg and/or xserver-xorg-core instead.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/

Package: xserver-xorg-legacy
Priority: optional
Section: x11
Installed-Size: 2387
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Replaces: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0
Breaks: x11-common (<< 1:7.7+10~), xserver-xorg-core (<< 2:1.17.2-3~)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2301728
MD5sum: 6cf9bd9860d1a60603acca3ff878c42f
SHA1: f7f278b74c1fb4ada2a69fa0382b6154dd7fcd4b
SHA256: 2539d5a9f560dc7c57012bcf1613488e82f1d272ecac025fa8d106080cdef053
SHA512: 3aa47a1022ed98bb7f956666daf74b96ab040bb9e7b630bc1e342ddf193436d51a6f741c5be34645f0ee438cb3b1db789602bbdc2d0b26eda8de77d345e57d7e
Description: setuid root Xorg server wrapper
 This package provides a wrapper for the Xorg X server, which is
 necessary for legacy drivers and non-Linux kernels.
Homepage: https://www.x.org/

Package: xserver-xorg-legacy-dbgsym
Priority: optional
Section: debug
Installed-Size: 25
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xserver-xorg-legacy (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xserver-xorg-legacy-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 9400
MD5sum: 47638470c02bdffdebcafa79441d196c
SHA1: d1ab1d5b5db23792cdb535685c7de99b1db31a05
SHA256: 48fda1ec504450ad1995472bc809172a3620efbf5938d82fd874c1f8854fb377
SHA512: 4bb3b58dd2af05809245cac7216a78322234c76b4e86d39d08968015c94d2ff1c5ea121e362e9d1afe74e727d2fdbe7d6a5a1f386fa87c6d12b4216aafb8c684
Description: debug symbols for xserver-xorg-legacy
Auto-Built-Package: debug-symbols
Build-Ids: c79cec46b16c45f680d12b9025086327ba79a7d7

Package: xvfb
Priority: optional
Section: x11
Installed-Size: 4086
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Provides: xserver
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1)
Recommends: xauth
Filename: pool/target/x/xorg-server/xvfb_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2940412
MD5sum: e67819dd0c5fe2afb99cb2a03949879c
SHA1: 16aa12e9ee9a460acb915257f21032fabfcedf3d
SHA256: 7d4f28de8f8e646101cfc54d88ca154cbc60551b9d41c74ea08004bdd0a69bea
SHA512: e4974c74a97fbae31738581f84018286f3ce7aceed23f734c7eeb3f9865124f170a27d07c8a998a25f7f138fa43061bc208d2f6b6297b6874b8ae8aec788862a
Description: Virtual Framebuffer 'fake' X server
 Xvfb provides an X server that can run on machines with no display hardware
 and no physical input devices. It emulates a dumb framebuffer using virtual
 memory. The primary use of this server was intended to be server testing,
 but other novel uses for it have been found, including testing clients
 against unusual depths and screen configurations, doing batch processing with
 Xvfb as a background rendering engine, load testing, as an aid to porting the
 X server to a new platform, and providing an unobtrusive way to run
 applications that don't really need an X server but insist on having one
 anyway.
 .
 This package also contains a convenience script called xvfb-run which
 simplifies the automated execution of X clients in a virtual server
 environment. This convenience script requires the use of the xauth
 program.
 .
 More information about X.Org can be found at:
 <URL:https://www.x.org>
 .
 This package is built from the X.org xserver module.
Homepage: https://www.x.org/
Multi-Arch: foreign

Package: xvfb-dbgsym
Priority: optional
Section: debug
Installed-Size: 2983
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xvfb (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xvfb-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2834808
MD5sum: 0995641a6ae8ba061b1b61e2b899b703
SHA1: b1c5f41ae934641f56a19914c26457d430ae02dd
SHA256: 49a057ab45d6c981e386e178f5b73928fe68036013963e3d7d639cd65924b8fe
SHA512: 8589cf832ff9174c85b4398011afe60bfb5747c0c94dd599ce0c70a0a627184af8810435f43d4c69a148485130333c712d6b264ebab52914f8e8a286ae880ed4
Description: debug symbols for xvfb
Auto-Built-Package: debug-symbols
Build-Ids: a48e06bb91c0edf9bbf77cd5ad67aa2c695b4282

Package: xwayland
Priority: optional
Section: x11
Installed-Size: 4134
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xserver-common (>= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.7.0), libc6 (>= 2.29), libgcrypt20 (>= 1.8.0), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 3.1~), libsystemd0, libunwind8, libwayland-client0 (>= 1.9.91), libxau6 (>= 1:1.0.9), libxdmcp6, libxfont2 (>= 1:2.0.1), libxshmfence1
Filename: pool/target/x/xorg-server/xwayland_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2949276
MD5sum: edbbf7e709d017f4f86cdbd2f36df7dd
SHA1: ab204b57057d90c1b79d473264be200902c1ca92
SHA256: 7b092048a7b6f0acf8950030556664ea94f85fa53b8aea16656f72707876fb67
SHA512: a57cf5228b06629576033d94f9b90022e75eb73f967072d713ad30b51594a1e453facd83f243f8bf0cd568446f55e53179b197623cff824cfe6867dd369b550d
Description: Xwayland X server
 This package provides an X server running on top of wayland, using wayland
 input devices for input and forwarding either the root window or individual
 top-level windows as wayland surfaces.
Homepage: https://www.x.org/

Package: xwayland-dbgsym
Priority: optional
Section: debug
Installed-Size: 3100
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: arm64
Source: xorg-server
Version: 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1
Depends: xwayland (= 2:1.20.11-1+deb11u10+apertis1bv2022.3cb1)
Filename: pool/target/x/xorg-server/xwayland-dbgsym_1.20.11-1+deb11u10+apertis1bv2022.3cb1_arm64.deb
Size: 2941904
MD5sum: 7e71c771208ad3fbf2bbfd166c6e4a2e
SHA1: 60dcfd83f50265978c46c61d2fa1cfcb1c189b0f
SHA256: e123025258dd6c3979d7b8eba7d17b192dd4b6b7c41918e5701b334f7a2050b6
SHA512: 5bee6da8c70ab1b5d8682f7907ddc4b9577b3283b629c2911f702babbf4fcd5bd1ef0b9ef06e131b57708a56413053f2374553fc3cc9f8ebc2f707a5a12d7058
Description: debug symbols for xwayland
Auto-Built-Package: debug-symbols
Build-Ids: 60a6592c7844e543c5ea8c13fc901d47103d4c79